参数资料
型号: CT1206K25G
厂商: EPCOS Inc
文件页数: 80/82页
文件大小: 0K
描述: VARISTOR 25VRMS 1206 SMD
标准包装: 1
系列: CT 标准
变阻器电压: 39V
电流 - 浪涌: 200A
电路数: 1
最大交流电压: 25VAC
最大直流电压: 31VDC
能量: 1.0J
封装/外壳: 1206(3216 公制)
其它名称: 495-4401-6
Multilayer varistors (MLVs)
Standard series
Specified values only apply to CTVS components that have not been subject to prior electrical,
mechanical or thermal damage. The use of CTVS devices in line-to-ground applications is
therefore not advisable, and it is only allowed together with safety countermeasures like
thermal fuses.
Storage
Only store CTVS in their original packaging. Do not open the package before storage.
Storage conditions in original packaging: temperature 25 to +45 ° C, relative humidity ≤ 75%
annual average, maximum 95%, dew precipitation is inadmissible.
Do not store CTVS devices where they are exposed to heat or direct sunlight. Otherwise the
packaging material may be deformed or CTVS may stick together, causing problems during
mounting.
Avoid contamination of the CTVS surface during storage, handling and processing.
Avoid storing CTVS devices in harmful environments where they are exposed to corrosive
gases for example (SO x , Cl).
Use CTVS as soon as possible after opening factory seals such as polyvinyl-sealed packages.
Solder CTVS components after shipment from EPCOS within the time specified:
CTVS with Ni barrier termination, 12 months
CTVS with AgPd and AgPt termination, 6 months
SHCV and CU series, 24 months
Handling
Do not drop CTVS components and allow them to be chipped.
Do not touch CTVS with your bare hands - gloves are recommended.
Avoid contamination of the CTVS surface during handling.
Mounting
When CTVS devices are encapsulated with sealing material or overmolded with plastic
material, electrical characteristics might be degraded and the life time reduced.
Make sure an electrode is not scratched before, during or after the mounting process.
Make sure contacts and housings used for assembly with CTVS components are clean before
mounting.
The surface temperature of an operating CTVS can be higher. Ensure that adjacent
components are placed at a sufficient distance from a CTVS to allow proper cooling.
Avoid contamination of the CTVS surface during processing.
Multilayer varistors (MLVs) with AgPd termination are not approved for lead-free soldering.
Soldering
Complete removal of flux is recommended to avoid surface contamination that can result in an
instable and/or high leakage current.
Use resin-type or non-activated flux.
Bear in mind that insufficient preheating may cause ceramic cracks.
Rapid cooling by dipping in solvent is not recommended, otherwise a component may crack.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 79 of 81
相关PDF资料
PDF描述
LT6200IS6-5#TRMPBF IC OP AMP 800MHZ R-R I/O SOT23-6
LT6200IS6-5#TRM IC OP AMP 800MHZ R-R I/O SOT23-6
3410.0031.03 FUSE MGA 125V 1A
3410.0029.04 FUSE MGA 125V 750MA
3410.0029.03 FUSE MGA 125V 750MA
相关代理商/技术参数
参数描述
CT1206K30G 功能描述:VARISTOR 30VRMS 1206 SMD RoHS:是 类别:过电压,电流,温度装置 >> TVS - 变阻器,MOV 系列:CT 标准 产品培训模块:Metal Oxide Varistors 产品目录绘图:ZA Series_Disc 14,20mm_V68~100 Bottom ZA Series_Disc 14mm 标准包装:700 系列:ZA 变阻器电压:110V 电流 - 浪涌:4.5kA 电路数:1 最大交流电压:60VAC 最大直流电压:81VDC 能量:20J 封装/外壳:圆盘 14mm 产品目录页面:2355 (CN2011-ZH PDF) 其它名称:F3074V100ZA15P-ND
CT1206K35G 制造商:EPCOS 制造商全称:EPCOS 功能描述:Multilayer technology
CT1206K40G 功能描述:VARISTOR 40VRMS 1206 SMD RoHS:是 类别:过电压,电流,温度装置 >> TVS - 变阻器,MOV 系列:CT 标准 标准包装:1 系列:- 变阻器电压:33V 电流 - 浪涌:4A 电路数:1 最大交流电压:14VAC 最大直流电压:18VDC 能量:0.015J 封装/外壳:0402(1005 公制) 其它名称:478-6870-6
CT1206K50G 制造商:EPCOS 制造商全称:EPCOS 功能描述:Multilayer technology
CT1206K60G 制造商:TDK-EPC 功能描述:Var MOV 60VAC/85VDC 100A 100V 1206 SMD Blister T/R 制造商:TDK-EPC 功能描述:Var MLV 60VAC/85VDC 100A 100V 1206 SMD Blister T/R 制造商:EPCOS 功能描述:Var MOV 60VAC/85VDC 100A 100V 1206 SMD Blister T/R 制造商:EPCOS 功能描述:Var MLV 60VAC/85VDC 100A 100V 1206 SMD Blister T/R