参数资料
| 型号： | D-436-0110 |
| 厂商： | TE Connectivity |
| 文件页数： | 2/2页 |
| 文件大小： | 0K |
| 描述： | CONN SPLICE BUTT 20-26AWG RED |
| 标准包装： | 500 |
| 端子类型： | 对接接头，直插式，单独开口 |
| 导线入口数目： | 多种不同的导线规格 |
| 端子： | 压接 |
| 线规： | 20-26 AWG |
| 绝缘体： | 完全绝缘 |
| 特点： | 热收缩 |
| 颜色： | 蓝，红条纹 |
| 包装： | 散装 |
| 其它名称： | 650038-000 7-1195130-1 |
SPECIFICATION CONTROL DRAWING
DEVICES ASSEMBLY PROCEDURE
1.0
2.0
SCOPE
This document oulines the procedure to be followed to obtain immersion resistant 3 or 2 to 1 in-line splices
using Devices In-line Splice Sealing System D-436-0110 .
PROCEDURE
a. Strip all wires 6.35 to 7.92 (0.250 to 0.312).
b. Attach the single lead to the appropriate size crimp splicer using a Raychem AD-1377 crimp tool.
c. Pass the wires to be attached to the other barrel through the sealing sleeve from the three-hole insert end.
d. Insert wires into barrel and crimp. Care must be taken so that wires remain untwisted between the crimp
splicer and the three wire seal or the sealing sleeve cannot be positioned properly.
e. Apply heat, first to the three-hole insert and then to the other. Heat should be applied until insert melts
and flows axially along the wire.
Tyco Electronics Corporation
305 Constitution Drive
Menlo Park, CA 94025, USA
Raychem
Products
TITLE :
IN-LINE SPLICE SEALING SYSTEM,
2 or 3 to 1 SPLICE: TIN PLATED,
COLOR CODED with Inspection Slots
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.
INCHES DIMENSIONS ARE BETWEEN BRACKETS.
DOCUMENT NO.:
D-436-0110
TOLERANCES:
0.00 N/A
0.0 N/A
ANGLES: N/A
ROUGHNESS IN
Tyco Electronics reserves the right to amend this
drawing at any time. Users should evaluate the
suitability of the product for their application.
DATE:
14-Nov.-00
DOC ISSUE:
1
0 N/A
MICRON
DRAWN BY:
M. FORONDA
REPLACES:
N/A
DCR NUMBER:
D001273
PROD. REV.
A
SCALE:
None
SIZE:
A
SHEET:
2 of 2
If this document is printed it becomes uncontrolled. Check for the latest revision.
相关PDF资料 |
PDF描述 |
|---|---|
| D-436-0115 | CONN SPLICE BUTT 304-1510CMA |
| D-436-0119 | CONN SPLICE PARA 304-1510CMA |
| D-436-38-COLD | SPLICE 14-12AWG 150 DEG C YELLOW |
| D-436-43 | CONN SPLICE BUTT 18-22AWG YLW |
| D-436-53 | CONN SPLICE BUTT 16-24AWG YLW |
相关代理商/技术参数 |
参数描述 |
|---|---|
| D-436-0114 | 制造商:TE Connectivity 功能描述:D-436-0114 |
| D-436-0115 | 功能描述:焊料和屏蔽管 RoHS:否 制造商:TE Connectivity / Raychem 类型:Shield Terminators 材料:Polyvinylidene Fluoride 内径:5.08 mm 长度:16.5 mm 最低收缩温度: 系列:S03 |
| D-436-0118 | 制造商:TE Connectivity 功能描述:D-436-0118 |
| D-436-0119 | 功能描述:焊料和屏蔽管 D-436 SER PVDF RoHS:否 制造商:TE Connectivity / Raychem 类型:Shield Terminators 材料:Polyvinylidene Fluoride 内径:5.08 mm 长度:16.5 mm 最低收缩温度: 系列:S03 |
| D-436-0125 | 制造商:TE Connectivity 功能描述:9-1195133-6 650153-000 制造商:TE Connectivity 功能描述:D-436-0125 |
发布紧急采购，3分钟左右您将得到回复。