- 您现在的位置：买卖IC网 > PDF目录17028 > DC1783A-H (Linear Technology)BOARD SAR ADC LTC2376-18 PDF资料下载
参数资料
| 型号： | DC1783A-H |
| 厂商： | Linear Technology |
| 文件页数： | 3/24页 |
| 文件大小： | 0K |
| 描述： | BOARD SAR ADC LTC2376-18 |
| 软件下载： | QuikEval II System |
| 设计资源： | DC1783A Design Files DC1783A Schematic |
| 标准包装： | 1 |
| 系列： | QuikEval™ |
| ADC 的数量： | 1 |
| 位数： | 18 |
| 采样率（每秒）： | 250k |
| 数据接口： | 串行，SPI? |
| 输入范围： | ±VREF |
| 在以下条件下的电源（标准）： | 3.4mW @ 250kSPS |
| 工作温度： | 0°C ~ 70°C |
| 已用 IC / 零件： | LTC2376-18 |
| 已供物品： | 板 |
| 相关产品： | LTC2376IDE-16#TRPBF-ND - IC ADC 16BIT SPI 250KSPS 16DFN LTC2376IDE-16#PBF-ND - IC ADC 16BIT SPI 250KSPS 16DFN LTC2376HMS-16#TRPBF-ND - IC ADC 16BIT SPI 250KSPS 16MSOP LTC2376HMS-16#PBF-ND - IC ADC 16BIT SPI 250KSPS 16MSOP LTC2376CDE-16#TRPBF-ND - IC ADC 16BIT SPI 250KSPS 16DFN LTC2376CDE-16#PBF-ND - IC ADC 16BIT SPI 250KSPS 16DFN LTC2376IMS-16#TRPBF-ND - IC ADC 16BIT 250KSPS 16-MSOP LTC2376CMS-16#TRPBF-ND - IC ADC 16BIT 250KSPS 16-MSOP LTC2376IMS-16#PBF-ND - IC ADC 16BIT 250KSPS 16-MSOP LTC2376CMS-16#PBF-ND - IC ADC 16BIT 250KSPS 16-MSOP 更多... |
LTC2376-18
11
237618f
APPLICATIONS INFORMATION
INPUT DRIVE CIRCUITS
A low impedance source can directly drive the high im-
pedance inputs of the LTC2376-18 without gain error. A
high impedance source should be buffered to minimize
settling time during acquisition and to optimize the dis-
tortion performance of the ADC. Minimizing settling time
is important even for DC inputs, because the ADC inputs
draw a current spike when entering acquisition.
For best performance, a buffer amplifier should be used
to drive the analog inputs of the LTC2376-18. The ampli-
fier provides low output impedance, which produces fast
settling of the analog signal during the acquisition phase.
It also provides isolation between the signal source and
the current spike the ADC inputs draw.
Input Filtering
The noise and distortion of the buffer amplifier and signal
source must be considered since they add to the ADC noise
and distortion. Noisy input signals should be filtered prior
to the buffer amplifier input with an appropriate filter to
minimize noise. The simple 1-pole RC lowpass filter (LPF1)
shown in Figure 4 is sufficient for many applications.
20Ω
3300pF
6600pF
20Ω
500Ω
LPF2
LPF1
BW = 600kHz
BW = 48kHz
SINGLE-ENDED-
TO-DIFFERENTIAL
DRIVER
SINGLE-ENDED-
INPUT SIGNAL
LTC2376-18
IN+
IN–
237618 F04
6800pF
High quality capacitors and resistors should be used in the
RC filters since these components can add distortion. NPO
and silver mica type dielectric capacitors have excellent
linearity. Carbon surface mount resistors can generate
distortion from self heating and from damage that may
occur during soldering. Metal film surface mount resistors
are much less susceptible to both problems.
Single-Ended-to-Differential Conversion
For single-ended input signals, a single-ended to differential
conversion circuit must be used to produce a differential
signal at the inputs of the LTC2376-18. The LT6350 ADC
driver is recommended for performing single-ended-to-
differential conversions. The LT6350 is flexible and may
be configured to convert single-ended signals of various
amplitudes to the ±5V differential input range of the
LTC2376-18. The LT6350 is also available in H-grade to
complement the extended temperature operation of the
LTC2376-18 up to 125°C.
Figure 5a shows the LT6350 being used to convert a 0V
to 5V single-ended input signal. In this case, the first
amplifier is configured as a unity gain buffer and the single-
ended input signal directly drives the high-impedance
input of the amplifier. As shown in the FFT of Figure 5b,
the LT6350 drives the LTC2376-18 to near full data sheet
performance.
The LT6350 can also be used to buffer and convert large
true bipolar signals which swing below ground to the
±5V differential input range of the LTC2376-18 in order
to maximize the signal swing that can be digitized. Fig-
ure6a shows the LT6350 being used to convert a ±10V
true bipolar signal for use by the LTC2376-18. In this
case, the first amplifier in the LT6350 is configured as
an inverting amplifier stage, which acts to attenuate and
level shift the input signal to the 0V to 5V input range of
the LTC2376-18. In the inverting amplifier configuration,
the single-ended input signal source no longer directly
drives a high impedance input of the first amplifier. The
input impedance is instead set by resistor RIN. RIN must
be chosen carefully based on the source impedance of the
signal source. Higher values of RIN tend to degrade both
the noise and distortion of the LT6350 and LTC2376-18
as a system.
Figure 4. Input Signal Chain
Another filter network consisting of LPF2 should be used
between the buffer and ADC input to both minimize the
noise contribution of the buffer and to help minimize distur-
bances reflected into the buffer from sampling transients.
Long RC time constants at the analog inputs will slow
down the settling of the analog inputs. Therefore, LPF2
requires a wider bandwidth than LPF1. A buffer amplifier
with a low noise density must be selected to minimize
degradation of the SNR.
相关PDF资料 |
PDF描述 |
|---|---|
| ESM10DREH | CONN EDGECARD 20POS .156 EYELET |
| 0210490947 | CABLE JUMPER 1.25MM .076M 25POS |
| NR8040T680M | INDUCTOR 68UH 1.1A 20% SMD |
| VE-B5T-EY | CONVERTER MOD DC/DC 6.5V 50W |
| EMM10DREH | CONN EDGECARD 20POS .156 EYELET |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DC1785A | 功能描述:BOARD DEMO LTC2991 RoHS:是 类别:编程器，开发系统 >> 评估板 - 传感器 系列:QuikEval™ 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:1 系列:- |
| DC1785A | 制造商:Linear Technology 功能描述:EVAL BOARD, LTC2991 TEMP, VOLTAGE, CURRE |
| DC1786A | 功能描述:BOARD DEMO LTC2871 RoHS:是 类别:编程器，开发系统 >> 评估演示板和套件 系列:- 标准包装:1 系列:- 主要目的:电信，线路接口单元（LIU） 嵌入式:- 已用 IC / 零件:IDT82V2081 主要属性:T1/J1/E1 LIU 次要属性:- 已供物品:板，电源，线缆，CD 其它名称:82EBV2081 |
| DC1788A-B | 制造商:Linear Technology 功能描述:EVAL BOARD, LT4275B POE & PD CONTROLLER, Silicon Manufacturer:Linear Technology, |
| DC1788A-C | 制造商:Linear Technology 功能描述:EVAL BOARD, LT4275C POE & PD CONTROLLER, Silicon Manufacturer:Linear Technology, |
发布紧急采购，3分钟左右您将得到回复。