参数资料
型号: DEMO56F8014
厂商: Freescale Semiconductor
文件页数: 100/124页
文件大小: 0K
描述: BOARD DEMO MC56F8014 W/US PS
标准包装: 1
类型: MCU
适用于相关产品: 56F8014
所含物品: 板,线缆,CD,电源
配用: APMOTOR56F8000E-ND - KIT DEMO MOTOR CTRL SYSTEM
相关产品: MC56F8014VFAE-ND - IC DIGITAL SIGNAL CTRLR 32-LQFP
Clock Generation Overview
56F8014 Technical Data, Rev. 11
Freescale Semiconductor
77
Figure 6-14 I/O Short Address Location Low Register (SIM_IOSALO)
6.3.10.3
Input/Output Short Address Location (ISAL[21:6])—Bit 15–0
This field represents the lower 16 address bits of the “hard coded” I/O short address.
6.4 Clock Generation Overview
The SIM uses master clocks, 2X system clock at a maximum of 64 MHz, from the OCCS module to
produce the peripheral and system (core and memory) clocks at a maximum of 32 MHz. It divides the
master clock by two and gates it with appropriate power mode and clock gating controls. The high speed
peripheral clock input from OCCS operates at three times the system clock for PWM and Quad Timer
module at a maximum of 96 MHz.
The OCCS configuration controls the operating frequency of the SIM’s master clocks. In the OCCS, either
an external clock or the relaxation oscillator can be selected as the master clock source (MSTR_OSC).
When selected, the relaxation oscillator can be operated at full speed (8 MHz), standby speed (200 kHz),
or powered down. An 8 MHz clock can be multiplied to 192 MHz using the PLL and postscaled to provide
a variety of high speed clock rates. Either the postscaled PLL output or the input clock of the PLL signal
can be selected to produce the master clocks to the SIM. When the PLL is not selected, the high speed
peripheral clock is disabled and the 2x system clock is the input clock from either the internal relaxation
oscillator or from an external clock source.
In combination with the OCCS module, the SIM provides power modes (see Section 6.5), clock enables
(SIM_PCE register, CLK_DIS, ONCE_EBL), and clock rate controls (TCR, PCR) to provide flexible
control of clocking and power utilization. The SIM’s clock enable controls can be used to disable
individual clocks when not needed. The clock rate controls enable the high speed clocking option for the
Timer channels and PWM but require the PLL to be on and selected. Refer to the 56F801X Peripheral
Reference Manual for further details.
6.5 Power-Down Modes
The 56F8014 operates in one of five Power-Down modes, as shown in Table 6-3
.
Base + $E
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
Read
ISAL[21:6]
Write
RESET
11111
1
Table 6-3 Clock Operation in Power-Down Modes
Mode
Core Clocks
Peripheral Clocks
Description
Run
Core and memory
clocks disabled
Peripheral clocks
enabled
Device is fully functional
相关PDF资料
PDF描述
VE-BTR-EY-F2 CONVERTER MOD DC/DC 7.5V 50W
VE-BTR-EY-F1 CONVERTER MOD DC/DC 7.5V 50W
VE-BTR-EX-S CONVERTER MOD DC/DC 7.5V 75W
VE-BTR-EW-S CONVERTER MOD DC/DC 7.5V 100W
VE-BTM-EY-F4 CONVERTER MOD DC/DC 10V 50W
相关代理商/技术参数
参数描述
DEMO56F8014-E 功能描述:开发板和工具包 - 其他处理器 MC56F8014 BD W/UNIV PS RoHS:否 制造商:Freescale Semiconductor 产品:Development Systems 工具用于评估:P3041 核心:e500mc 接口类型:I2C, SPI, USB 工作电源电压:
DEMO56F8014-EE 功能描述:开发板和工具包 - 其他处理器 MC56F8014 BD W/UNIV PS RoHS:否 制造商:Freescale Semiconductor 产品:Development Systems 工具用于评估:P3041 核心:e500mc 接口类型:I2C, SPI, USB 工作电源电压:
DEMO90121DA 功能描述:KIT DEMO RFID DOOR ACCESS RoHS:是 类别:RF/IF 和 RFID >> 过时/停产零件编号 系列:- 标准包装:1 系列:- 类型:用于 200/300 系列的欧盟开发套件 适用于相关产品:Zensys RF 模块 所含物品:开发板,模块,编程器,软件,线缆,电源 其它名称:703-1019Q3225667
DEMO90121LR 功能描述:KIT DEMO LONG RANGE READER RoHS:是 类别:RF/IF 和 RFID >> RFID 评估和开发套件及电路板 系列:- 产品培训模块:M24LR64 Dual Interface EEPROM 标准包装:1 系列:- 类型:读取器模块 频率:13.56MHz 适用于相关产品:M24LR-64-R 已供物品:2 根基准天线,I2C 和 RFID 读取器,样品 其它名称:497-10480
DEMO908AP64 功能描述:开发板和工具包 - S08 / S12 MC68HC908AP64 DEMO BRD RoHS:否 产品:Development Kits 工具用于评估:MC9S12G128 核心:S12 接口类型:CAN, LIN, RS-232, USB 工作电源电压:5 V 制造商:Freescale Semiconductor