- 您现在的位置：买卖IC网 > Datasheet目录974 > DEMOAPEXSENSOR (Freescale Semiconductor)BOARD DESIGN ALTITUDE PRESSURE Datasheet资料下载
参数资料
| 型号： | DEMOAPEXSENSOR |
| 厂商： | Freescale Semiconductor |
| 文件页数： | 14/20页 |
| 文件大小： | 0K |
| 描述： | BOARD DESIGN ALTITUDE PRESSURE |
| 标准包装： | 1 |
| 传感器类型： | 加速计，压力，水位，高度计/气压计 |
| 传感范围： | 多范围 |
| 接口： | I²C，SPI，模拟 |
| 灵敏度： | 多重 |
| 电源电压： | 10 V |
| 嵌入式： | 是，MCU，8 位 |
| 已供物品： | 板 |
| 已用 IC / 零件： | MPX2102，MPXV5004G，MPL115A2，MMA7361L |
| 产品目录页面： | 2808 (CN2011-ZH PDF) |
Filtered Value
3ft level lower P
Calibration Section
Constantly Running
Filtered Value
0ft level higher P
Difference in
Pressure
Resolution=
(Difference)/3ft
100ms Sample of raw
Pressure ? 24bit ADC
Twice Low-pass
filtered value ? 18bits
usable data
Current Pressure
value stored
Altitude in ft =
[ Current Pressure –Zero Pressure Value ]/3
Figure 7. APEX Short Distance Calibration Routine
DISSECTION OF THE ISSUES FACING THE PRESSURE READING
Note that with trying to resolve flowchart in Figure 7 , there are issues as mentioned with the physical surroundings. A/C on/off
cycling along with airflow in the form of a breeze. Doors opening and closing change the pressure dynamic of a room as the air
flows in or out. This leads to the shifting in the zero level of the altitude as demonstrated in the flowchart.
This causes the scenario of leaving the APEX on the table and seeing that the 0 foot reading shifts up and down – due to the
many root causes in barometric pressure change. This is shown as an ‘experiment’ in the demo board. A straight linear pressure-
altitude can sometimes work, but generally the shifting pressure wreaks havoc on the result.
Multiple sensor systems can be used to possibly stabilize the result. For example, a multiple sensor system can use the
accelerometer to detect movement and re-zero altimeter readings, if pressure changes are not related to movement.
High Resolution Altimetry Customer Implementations
Altimetry
Raw Value Altitude
0x017c1d 459 m
2(LP) value Pressure
0x017c1f 95.365 kPa
In the Altimetry screen shot as see in the Quick Start Guide , note the raw and the twice Low-Pass filtered values. These are
converted using the pressure equations 1 and 2 as seen on page 12 for pressure and altitude conversion. The APEX does not
have a calibration for the altitude as most customer implementations of high resolution pressure, zero a point and measure the
dynamic change in meters for a given amount of time. The following are examples of ways to implement a high resolution
altimeter with focus on the ‘dynamic’ changing pressure rather than a constant absolute altitude reading.
Altimeter Example 1:
A person sets a zero point before hiking a steep hill. At the top of the hill, the change in barometric pressure is related to meters
or feet. This is a measure of the dynamic change of pressure over a short distance. This is a targeted application versus the other
application of knowing the altitude from sea level at all times after one factory calibration.
AN3956
Sensors
Freescale Semiconductor
14
相关PDF资料 |
PDF描述 |
|---|---|
| DIL-CL-1A81-9-13M | RELAY TELECOM SPST 500MA |
| DIP05-1A72-11D | RELAY REED SPST 1A 5V |
| DIP2415R | RELAY SSR 1.5A 20-280VAC RNDM |
| DK-1511-001/BL | CABLE RJ45 CAT5E W/BOOT 1' BLK |
| DK-1511-001/B | CABLE RJ45 CAT5E W/BOOT 1' BLUE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DEMO-AT3/4-XX32 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:AT-32032 and AT-41532 demonstration for 800-900 MHz applications |
| DEMO-AT32063 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:860 MHz cascode amplifier |
| DEMO-AT3XX11 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:AT-31011 2400 MHz 2 stage LNA amplifier; can also be used for AT-30511 or AT-32011 |
| DEMO-AT3XX33 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:900 MHz single stage LNA amplifier using AT-32033; circuit can also be used for AT-30533 or AT-31033 |
| DEMO-ATF3616-3 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:2 to 2.4 GHz single stage LNA using ATF-36163 |
发布紧急采购，3分钟左右您将得到回复。