参数资料
型号: DEMOAPEXSENSOR
厂商: Freescale Semiconductor
文件页数: 16/20页
文件大小: 0K
描述: BOARD DESIGN ALTITUDE PRESSURE
标准包装: 1
传感器类型: 加速计,压力,水位,高度计/气压计
传感范围: 多范围
接口: I²C,SPI,模拟
灵敏度: 多重
电源电压: 10 V
嵌入式: 是,MCU,8 位
已供物品:
已用 IC / 零件: MPX2102,MPXV5004G,MPL115A2,MMA7361L
产品目录页面: 2808 (CN2011-ZH PDF)
This is applied in the MCU code as a series of operations so the MCU does not have to apply the equation directly. The
following is a possible sequence for the calculation Pcomp, the trimmed pressure output. Input values are in bold.
c11x1 = c11 * Padc
a11 = b1 + c11x1
c12x2 = c12 * Tadc
a1 = a11 + c12x2
c22x2 = c22 * Tadc
a2 = b2 + c22x2
a1x1 = a1 * Padc
y1 = a0 + a1x1
a2x2 = a2 * Tadc
Pcomp = y1 + a2x2
Note that the Altitude measurement displayed for the MPL115A cannot be directly compared to the previous section on the
MPXM2102A. The MPL115A has an internal 10-bit ADC, with an accuracy of ±1kPa. The system set up on the
DEMOAPEXSENSOR for the MPXM2102A shows less than 1m resolution with a 24-bit ADC. The additional hardware cost,
digital and analog noise filtering, and calibration required is substantial compared to implementing the MPL115A directly to an
MCU. The value of the altitude changes constantly on the display, but it is also a raw conversion. It could be filtered, sampled in
longer intervals etc. to give the illusion of a more stable value. Here it is shown simply to get an idea of the raw conversion result.
The MPL115A can be used to measure changes in vacuum or for barometric pressure rather than the MPXM2102A.
In the Quick Start Guide there is a section to set a threshold above the current barometric pressure for an alarm. When the
alarm is set, the status LEDs will light up green. After the alarm threshold is reached, the red LED toggles on/off while a buzzer
is sounded. This can be activated via waiting for a pressure change, or applying pressure to the DEMOAPEXSENSOR. A clear
Ziploc bag or syringe with a soft applicator tip useful in activating the alarm.
Weather Station Implementation
Freescale application note, AN3914, details altimetry and barometric weather systems and also includes code examples from
the DEMOAPEXSENSOR. There are two sections in the APEX board; a simple weather station or an advanced method. The
simple method does a comparison by asking the user to input their known altitude, and comparing this pressure to that of the
MPL115A. The delta in the value is compared in the Table 7 .
Table 7.
Analysis
dP > +0.25 kPa
-0.25 kPa < dP < 0.25 kPa
dP < -0.25 kPa
Sun Symbol
Sun/Cloud Symbol
Rain Symbol
Output
This is typical of a simple application and the APEX simulates a desktop barometer that is commonly bought at retailers.
A more advanced version of this calculates the pressure change by taking values over time and seeing the delta change over
a 3 hour period. This is outlined in Table 8 (AN3914).
Table 8. Advanced Weather Determination
Analysis
dP/dt > 0.25 kPa/h
0.05 kPa/h < dP/dt < 0.25 kPa/h
-0.05 kPa/h < dP/dt < 0.05 kPa/h
-0.25 kPa/h < dP/dt < -0.05 kPa/h
dP/dt < -0.25 kPa/h
Output
Quickly rising High Pressure System, not stable
Slowly rising High Pressure System, stable good weather
Stable weather condition
Slowly falling Low Pressure System, stable rainy weather
Quickly falling Low Pressure, Thunderstorm, not stable
AN3956
Sensors
Freescale Semiconductor
16
相关PDF资料
PDF描述
DIL-CL-1A81-9-13M RELAY TELECOM SPST 500MA
DIP05-1A72-11D RELAY REED SPST 1A 5V
DIP2415R RELAY SSR 1.5A 20-280VAC RNDM
DK-1511-001/BL CABLE RJ45 CAT5E W/BOOT 1' BLK
DK-1511-001/B CABLE RJ45 CAT5E W/BOOT 1' BLUE
相关代理商/技术参数
参数描述
DEMO-AT3/4-XX32 制造商:未知厂家 制造商全称:未知厂家 功能描述:AT-32032 and AT-41532 demonstration for 800-900 MHz applications
DEMO-AT32063 制造商:未知厂家 制造商全称:未知厂家 功能描述:860 MHz cascode amplifier
DEMO-AT3XX11 制造商:未知厂家 制造商全称:未知厂家 功能描述:AT-31011 2400 MHz 2 stage LNA amplifier; can also be used for AT-30511 or AT-32011
DEMO-AT3XX33 制造商:未知厂家 制造商全称:未知厂家 功能描述:900 MHz single stage LNA amplifier using AT-32033; circuit can also be used for AT-30533 or AT-31033
DEMO-ATF3616-3 制造商:未知厂家 制造商全称:未知厂家 功能描述:2 to 2.4 GHz single stage LNA using ATF-36163