- 您现在的位置：买卖IC网 > PDF目录16781 > DK-114N-1 (Luminus Devices Inc)KIT DEV PHLATLIGHT CBT/PT LED PDF资料下载
参数资料
| 型号： | DK-114N-1 |
| 厂商： | Luminus Devices Inc |
| 文件页数： | 5/13页 |
| 文件大小： | 0K |
| 描述： | KIT DEV PHLATLIGHT CBT/PT LED |
| 标准包装： | 1 |
| 系列： | PhlatLight® |
| 主要目的： | 照明，LED |
| 已用 IC / 零件： | CBT，PT 系列 |
| 主要属性： | 可调光 |
| 已供物品： | 2 个板，线缆，文档，散热片，硬件 |
| 其它名称： | 1214-1137 |
PhlatLight ? DK-114N Series Development Kit Manual
age types, a cable is soldered to the board.
The 12” cable assembly, which includes the interface board
to driver board cables as well as the interface board to fan
cable connects as shown in Figures 13 and 14. The 12” ca-
ble assembly, as shown in figure 13, connects the control
board to a power supply. This connection is shown in figure
15.
Important Note: In almost all cases, the connectors will only
insert in one direction. Care must be taken not to force any of
the connections as this may damage the connectors. In the
case that the connector can be connected improperly, the con-
nector and mating cable are clearly marked with either color
coding or lettering. If powered with improper connections,
Figure 9: PhlatLight device placed on top of thermal inter-
damage can be caused to the LEDs and circuit boards.
face material
4. Insert screws in the holes of the coreboard and tighten. To
ensure equal pressure is exerted by all screws, alternate
tightening each screw until the board is securely fastened
(Figure 10). The device is now mounted and ready for elec-
trical connections.
Figure 11: CBT-54 LED to driver board cable interface
Figure 10: Fully mounted PhlatLight device
Electrical Connections
The following sections assume that the user has all of the
equipment listed in Table 1.
1. Prepare the power supply and ensure the power supply be-
ing used is capable of providing enough power to the devic-
es. A single channel at full power will draw up to ~80W at
12V and 6.5A. If using a variable power supply like the
Lambda ZUP2020, preset the voltage to 12V and set the
current to the maximum. Power off the supply until all con-
nections are established and the board settings are ready.
2. Attach all of the wiring included in the kit. The short, 3”
Figure 12: CBT-54 LED to driver board cable interface
cable connects the LED (C21 package types only) to the
driver board as shown in Figures 11 and 12. For C11 pack-
? 2009 Luminus Devices, Inc. - All Rights Reserved
Page 5
相关PDF资料 |
PDF描述 |
|---|---|
| 0210390984 | CABLE JUMPER 1MM .305M 27POS |
| H3AAS-2006M | IDC CABLE - HSC20S/AE20M/HSC20S |
| 202C663-51/164-0 | BOOT MOLDED |
| RW2-4809D/H3/SMD | CONV DC/DC 2W 36-72VIN +/-09VOUT |
| MIC2811-4GMSYML TR | IC PWR MGMT DGTL TRPL LDO 16-MLF |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DK-114N-3 | 功能描述:LED 照明开发工具 Dev Kit 3-CH 14A Driver Brd RoHS:否 制造商:Fairchild Semiconductor 产品:Evaluation Kits 用于:FL7732 核心: 电源电压:120V 系列: 封装: |
| DK115199 | 制造商:TE Connectivity 功能描述: |
| DK115201 | 制造商:TE Connectivity 功能描述: |
| DK115202 | 制造商:TE Connectivity 功能描述: |
| DK116399 | 制造商:TE Connectivity 功能描述: |
发布紧急采购，3分钟左右您将得到回复。