- 您现在的位置：买卖IC网 > PDF目录21463 > DK1A-L2-24V (Panasonic Electric Works)RELAY GEN PURPOSE SPST 10A 24V PDF资料下载
参数资料
| 型号： | DK1A-L2-24V |
| 厂商： | Panasonic Electric Works |
| 文件页数： | 3/5页 |
| 文件大小： | 0K |
| 描述： | RELAY GEN PURPOSE SPST 10A 24V |
| 其它有关文件： | Standards Chart |
| 标准包装： | 50 |
| 系列： | DK |
| 继电器类型： | 通用 |
| 线圈类型： | 锁存，双线圈 |
| 线圈电流： | 8.3mA |
| 线圈电压： | 24VDC |
| 触点形式： | SPST-NO（1 A 型） |
| 触点额定值（电流）： | 10A |
| 切换电压： | 250VAC，125VDC - 最小值 |
| 关闭电压（最大）： | 16.8 VDC |
| 特点： | 密封式 - 全部 |
| 安装类型： | 通孔 |
| 端接类型： | PC 引脚 |
| 包装： | 管件 |
| 触点材料： | 银锡氧化物（AgSnO） |
| 操作时间： | 10ms |
| 释放时间： | 8ms |
| 线圈功率： | 200 mW |
| 线圈电阻： | 2.88 千欧 |
| 工作温度： | -40°C ~ 65°C |
| 其它名称： | 255-1597 |
DK
2. Speci?cations
Characteristics
Arrangement
Item
1 Form A
Speci?cations
1 Form A 1 Form B 2 Form A
Contact
Rating
Contact resistance (Initial)
Contact material
Nominal switching capacity (resistive load)
Max. switching power (resistive load)
Max. switching voltage
Max. switching current
Nominal operating power
Min. switching capacity (Reference value)* 1
Insulation resistance (Initial)
Max. 30 m ? (By voltage drop 6 V DC 1A)
Au-?ashed AgSnO 2 type Au-?ashed AgNi type
10 A 250 V AC, 10 A 30 V DC 8 A 250 V AC,8 A 30 V DC 8 A 250 V AC,8 A 30 V DC
2,500VA, 300 W 2,000 VA, 240 W 2,000 VA, 240 W
250 V AC, 125 V DC 250 V AC, 125 V DC 250 V AC, 125 V DC
10 A 8 A 8 A
200 mW
10m A 5 V DC
Min. 1,000M ? (at 500V DC) Measurement at same location as “Breakdown voltage” section.
Breakdown voltage
(Initial)
Between open contacts
Between contact and coil
1,000 Vrms for 1min. (Detection current: 10mA.)
4,000 Vrms for 1min. (Detection current: 10mA.)
Electrical
Surge breakdown
voltage* 2 (Initial)
between contacts and coil
10,000 V
characteristics
Temperature rise (coil) (at 65 ° C 149 ° F )
Operate time [Set time] (at 20 ° C 68 ° F )
Release time [Reset time] (at 20 ° C 68 ° F )
Max. 40 ° C (By resistive method, nominal voltage applied to the coil; max. switching current)
Max. 10 ms (Approx. 5 ms) [10 ms (Approx. 5 ms)]
(Nominal coil voltage applied to the coil, excluding contact bounce time.)
Max. 8 ms (Approx. 3 ms) [10 ms (Approx. 3 ms)]
(Nominal coil voltage applied to the coil, excluding contact bounce time.) (without diode)
Mechanical
characteristics
Shock resistance
Vibration resistance
Functional
Destructive
Functional
Destructive
Min. 98 m/s 2 (Half-wave pulse of sine wave: 11 ms; detection time: 10 μ s.)
Min. 980 m/s 2 (Half-wave pulse of sine wave: 6 ms.)
10 to 55 Hz at double amplitude of 1.5 mm (Detection time: 10 μ s.)
10 to 55 Hz at double amplitude of 3 mm
Expected life
Conditions
Mechanical
Electrical
Conditions for operation, transport and storage* 3
Max. operating speed (at rated load)
Min. 5 × 10 7 (at 300 times/min.)
Min. 10 5 (resistive load, at 20 times/min., at rated capacity)
Ambient temperature: –40 ° C to +65 ° C –40 ° F to +149 ° F ,
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
20 times/min.
Unit weight
Approx. 5 g .18 oz
Approx. 6 g .21 oz
Approx. 6 g .21 oz
Notes: *1. This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the
actual load.
*2. Wave is standard shock voltage of ± 1.2 × 50 μ s according to JEC-212-1981
*3. The upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value. Refer to Usage, transport and storage
conditions in NOTES.
REFERENCE DATA
1-(1). Maximum operating power (1 Form A)
100
1-(2). Maximum operating power
(1 Form A 1 Form B, 2 Form A)
2-(1). Life curve (1 Form A)
1,000
10
AC inductive load
(cos ? = 0.4)
AC resistive load
10
AC inductive load
(cos ? = 0.4) AC resistive load
100
5
250 V AC resistive load
30 V DC resistive load
1
DC inductive load
(L/R = 7 ms)
DC resistive
load
1
DC inductive load
(L/R = 7 ms)
DC resistive
load
10
250 V AC inductive load (cos ? = 0.4)
30 V DC inductive load (L/R = 7 ms)
0.1
10
100
1,000
0.1
10
100
1,000
1
0
1
2
3
4
5
6
7
8
9
10
Contact voltage, V
2-(2). Life curve
(1 Form A 1 Form B, 2 Form A)
1,000
Contact voltage, V
3-(1). Operate/Release time (1 Form A)
Tested sample: DK1a-24V, 5 pcs.
9
Contact current, A
3-(2). Operate/Release time
(1 Form A 1 Form B, 2 Form A)
Tested sample: DK1a1b-12V, 5 pcs.
9
8
8
Release time
7
Operate time
7
(with diode)
Max.
x
100
6
Max.
6
Min.
10
250 V AC resistive load
30 V DC resistive load
250 V AC inductive load (cos ? = 0.4)
30 V DC inductive load (L/R = 7 ms)
5
4
3
2
Release time
(with diode)
x
Max.
x
Min.
Min.
Max.
x
5
4
3
2
Operate time
Release time
Max.
x
Min.
Max.
x
Min.
1
Release time
Min.
1
1
0
1
2
3
4
5
6
7
8
9
10
0
80
90
10
110
120
130
140
0
80
90
10
110
120
130
140
Contact current, A
Coil applied voltage,%V
Coil applied voltage,%V
Panasonic Corporation
Automation Controls Business Unit
industrial.panasonic.com/ac/e/
ASCTB177E 201202-T
相关PDF资料 |
PDF描述 |
|---|---|
| 6827 RD001 | HOOK UP WIRE 16AWG RED 1000' |
| 3112KL-05W-B50-E00 | FAN DC AXIAL 24V 80X32 3850 RPM |
| DK1A-L2-12V | RELAY GEN PURPOSE SPST 10A 12V |
| 2-1571550-7 | CONN SOCKET DIP 22POS GOLD T/H |
| ALZ22B12 | RELAY GEN PURPOSE SPST 16A 12V |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DK1AL224VF | 制造商:PANASONIC 制造商全称:Panasonic Semiconductor 功能描述:10 A MINIATURE POWER RELAY |
| DK1A-L2-24V-F | 功能描述:通用继电器 10A 24VDC SPST 2 COIL LATCHING PCB RoHS:否 制造商:Omron Electronics 触点形式:1 Form A (SPST-NO) 触点电流额定值:150 A 线圈电压:24 VDC 线圈电阻:144 Ohms 线圈电流:167 mA 切换电压:400 V 安装风格:Chassis 触点材料: |
| DK1AL224VNIL | 制造商:PANASONIC 制造商全称:Panasonic Semiconductor 功能描述:10 A MINIATURE POWER RELAY |
| DK1AL23FJ | 制造商:Panasonic Electric Works 功能描述: |
| DK1A-L2-3V | 功能描述:继电器插座与硬件 1 Form A 3VDC 10A 250VAC RoHS:否 制造商:TE Connectivity / Schrack 附件类型:Socket 相关继电器系列:RP, RT, RY 端接类型:PCB 极数:1 |
发布紧急采购，3分钟左右您将得到回复。