参数资料
| 型号： | DLP-232PC |
| 厂商： | DLP Design Inc |
| 文件页数： | 3/10页 |
| 文件大小： | 0K |
| 描述： | MODULE USB-MCU FT232R W/18F2410 |
| 产品目录绘图： | DLP-232PC |
| 标准包装： | 1 |
| 系列： | USB |
| 模块/板类型： | 微控制器模块 |
| 适用于相关产品： | USB |
| 产品目录页面： | 635 (CN2011-ZH PDF) |
| 其它名称： | 813-1003 |
Rev. 1.6 (October 2010)
2
DLP Design, Inc.
1.0 INTRODUCTION
The DLP-232PC Data Acquisition Module is a low-cost, easy-to-use data acquisition module for
measuring voltages, controlling and monitoring processes, and acquiring temperature data. Each of
the 14 available channels can be configured for digital I/O or temperature modes via single-byte
commands. Eight of the 14 channels can be configured to measure analog voltages in the range of
0-5 volts. All operational power is taken from the host PC via the USB port.
The mode of each I/O is automatically changed with each command sent. For example, if an I/O is
set to Digital Output – High and then the Digital Input Mode is selected, the I/O is first changed to
Input Mode and then the high/low state is read and returned to the host.
The programming interface (ICSP) is available for custom firmware development.
2.0 SPECIFICATIONS
The DLP-232PC is a 5-volt system that derives its power from the host USB port. Each channel has
the following capabilities:
Digital Output: Set high, or clear to low. (The actual high/low voltage depends upon sink/source
current.)
Digital Input: Read the high/low state.
Analog In: (Channels 1-8 only) read and return the voltage on each I/O pin using a 10-bit A/D
(0-5 volt range, accuracy based on 5-volt USB Host supply voltage).
Temperature: Measure temperature using a digital temperature sensor (purchased separately) in the
range of 67 to 257°F (-55 to 125°C).
3.0 ABSOLUTE MAXIMUM RATINGS
Stresses above those listed here may cause permanent damage to the DLP-232PC:
Operating Temperature: 0-70°C
Voltage on I/Os with Respect to Ground: -0.3V to +5.3V
Sink/Source Current on Any I/O: 25mA
4.0 WARNINGS
Unplug the DLP-232PC from the host PC before making electrical connection to the module to
avoid possible damage caused by electrical surge.
Observe static precautions to prevent damage to the DLP-232PC module.
相关PDF资料 |
PDF描述 |
|---|---|
| DLP-245PB-G | MODULE USB-MCU FT245RL W/16F877A |
| DLP-245PL-G | MOD USB-MCU FT245RL W/18LF8722 |
| DLP-245SY-G | MODULE USB-MCU FT245RL W/SX48 |
| DLP-FPGA | MODULE USB-TO-FPGA TRAINING TOOL |
| DLP-HS-FPGA3 | MODULE USB-TO-FPGA SPARTAN 3A |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DLP240-24/E | 制造商:TDK-Lambda Corporation 功能描述:PSU DIN RAIL 24V 10A 制造商:TDK-Lambda Corporation 功能描述:PSU, DIN RAIL, 24V, 10A 制造商:TDK-Lambda Corporation 功能描述:PSU, DIN RAIL, 24V, 10A; Power Supply Output Type:Fixed; Input Voltage VAC:85V to 265V; No. of Outputs:1; Output Power Max:240W; Approvals / Standards:EN 50178; SVHC:No SVHC (19-Dec-2012); Approval Bodies:CE / CSA / EN / UL; ;RoHS Compliant: Yes |
| DLP240-24/E | 制造商:TDK-Lambda Corporation 功能描述:PSU DIN RAIL 24V 10A |
| DLP240241 | 功能描述:线性和开关式电源 240W 24V 10A RoHS:否 制造商:TDK-Lambda 产品:Switching Supplies 开放式框架/封闭式:Enclosed 输出功率额定值:800 W 输入电压:85 VAC to 265 VAC 输出端数量:1 输出电压（通道 1）:20 V 输出电流（通道 1）:40 A 商用/医用: 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:Rack 长度: 宽度: 高度: |
| DLP240-24-1 | 制造商:TDK-Lambda Corporation 功能描述:Power Supply, DIN Ral Mount, 24V, 10A, 240W, 85-264 VAC, Barrier Strip Term 制造商:TDK-Lambda Corporation 功能描述:85 to 265VAC / 120 to 370VDC 24VDC 10A 82% / 86% +50 -10 240W 65~26~140mm Bulk |
| DLP240241/E | 功能描述:DIN导轨式电源 240W 24V 10A DIN Rail 115/230VAC RoHS:否 制造商:Mean Well 产品:Linear Supplies 商用/医用:Commercial 输出功率额定值:960 W 输入电压:180 VAC to 264 VAC, 254 VDC to 370 VDC 输出端数量:1 输出电压（通道 1）:48 V 输出电流（通道 1）: 输出电压（通道 2）: 输出电流（通道 2）: 输出电压（通道 3）: 输出电流（通道 3）: 尺寸:150 mm L x 110 mm W |
发布紧急采购，3分钟左右您将得到回复。