参数资料
| 型号： | DLP-232PC |
| 厂商： | DLP Design Inc |
| 文件页数： | 8/10页 |
| 文件大小： | 0K |
| 描述： | MODULE USB-MCU FT232R W/18F2410 |
| 产品目录绘图： | DLP-232PC |
| 标准包装： | 1 |
| 系列： | USB |
| 模块/板类型： | 微控制器模块 |
| 适用于相关产品： | USB |
| 产品目录页面： | 635 (CN2011-ZH PDF) |
| 其它名称： | 813-1003 |
Rev. 1.6 (October 2010)
7
DLP Design, Inc.
A/D Setup
u
0x75
No Analogs
A/D Converter disabled
v
0x76
CH1 Only
A/D active on Channel 1 only
w
0x77
CH1 and CH2
A/D active on Channels 1 and 2
x
0x78
CH1,2,3
A/D active on Channels 1 through 3
y
0x79
CH1,2,3,4
A/D active on Channels 1 through 4
z
0x7A
CH1,2,3,4,5
A/D active on Channels 1 through 5
#
0x23
CH1,2,3,4,5,6
A/D active on Channels 1 through 6
$
0x24
CH1 – CH7
A/D active on Channels 1 through 7
%
0x25
CH1 – CH8
A/D active on Channels 1 through 8
LED Commands
{
0x7B
LED Off
}
0x7D
LED On
Note 1 – Data is returned in either the form of ASCII characters (ex: 1.25V, 78.2°F) or binary (raw data)
depending upon the current mode. The power-up default mode is ASCII such that data is easily read using a
terminal emulator program.
Note 2 – Requires DS18B20 digital temperature sensor (purchased separately). See Section 8.0 of this
document for connection details.
8.0 TEMPERATURE
Up to 14 DS18B20 digital temperature sensors can be connected to the DLP-232PC. For best
performance, use Category 5 type computer cable to connect the sensors to the DLP-232PC. Two
pairs of wires in the Cat 5 cable are required for the connection. The first pair is for Power (5V) and
Ground, and the second pair is designated as Data and Ground. In addition, a pull-up resistor is
required for the data line in the range if 1.5K-4.7K Ohms. Figure 1 shows an example of this
connection using I/O Channel 11:
FIGURE 1
1. GND
2. DATA
3. VCC
Pin 1
DS18B20
DLP-232PC
1.5K - 4.7K Ohm
9
10
11
The first time temperature data is requested, a value of 999.99° (0xFF x 2 if in Binary Mode) is
returned. Subsequent reads will return valid temperature data if a temperature sensor is properly
configured and connected to the specified I/O port. If no sensor is connected, a Temperature
command will always return 999.99°. Please note that the PAR versions of the sensor
(DS18B20+PAR) will not work with the 232PC firmware.
相关PDF资料 |
PDF描述 |
|---|---|
| DLP-245PB-G | MODULE USB-MCU FT245RL W/16F877A |
| DLP-245PL-G | MOD USB-MCU FT245RL W/18LF8722 |
| DLP-245SY-G | MODULE USB-MCU FT245RL W/SX48 |
| DLP-FPGA | MODULE USB-TO-FPGA TRAINING TOOL |
| DLP-HS-FPGA3 | MODULE USB-TO-FPGA SPARTAN 3A |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DLP240-24/E | 制造商:TDK-Lambda Corporation 功能描述:PSU DIN RAIL 24V 10A 制造商:TDK-Lambda Corporation 功能描述:PSU, DIN RAIL, 24V, 10A 制造商:TDK-Lambda Corporation 功能描述:PSU, DIN RAIL, 24V, 10A; Power Supply Output Type:Fixed; Input Voltage VAC:85V to 265V; No. of Outputs:1; Output Power Max:240W; Approvals / Standards:EN 50178; SVHC:No SVHC (19-Dec-2012); Approval Bodies:CE / CSA / EN / UL; ;RoHS Compliant: Yes |
| DLP240-24/E | 制造商:TDK-Lambda Corporation 功能描述:PSU DIN RAIL 24V 10A |
| DLP240241 | 功能描述:线性和开关式电源 240W 24V 10A RoHS:否 制造商:TDK-Lambda 产品:Switching Supplies 开放式框架/封闭式:Enclosed 输出功率额定值:800 W 输入电压:85 VAC to 265 VAC 输出端数量:1 输出电压（通道 1）:20 V 输出电流（通道 1）:40 A 商用/医用: 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:Rack 长度: 宽度: 高度: |
| DLP240-24-1 | 制造商:TDK-Lambda Corporation 功能描述:Power Supply, DIN Ral Mount, 24V, 10A, 240W, 85-264 VAC, Barrier Strip Term 制造商:TDK-Lambda Corporation 功能描述:85 to 265VAC / 120 to 370VDC 24VDC 10A 82% / 86% +50 -10 240W 65~26~140mm Bulk |
| DLP240241/E | 功能描述:DIN导轨式电源 240W 24V 10A DIN Rail 115/230VAC RoHS:否 制造商:Mean Well 产品:Linear Supplies 商用/医用:Commercial 输出功率额定值:960 W 输入电压:180 VAC to 264 VAC, 254 VDC to 370 VDC 输出端数量:1 输出电压（通道 1）:48 V 输出电流（通道 1）: 输出电压（通道 2）: 输出电流（通道 2）: 输出电压（通道 3）: 输出电流（通道 3）: 尺寸:150 mm L x 110 mm W |
发布紧急采购，3分钟左右您将得到回复。