参数资料
| 型号： | DLP-USB232M-G |
| 厂商： | DLP Design Inc |
| 文件页数： | 3/12页 |
| 文件大小： | 0K |
| 描述： | MODULE USB-TO-TTL SRL UART CONV |
| 产品目录绘图： | DLP-USBxxxM-G |
| 标准包装： | 1 |
| 系列： | DLP-USB232M |
| 类型： | USB 至 UART |
| 连接器类型： | 迷你型 B 至 DIL（双直插式） |
| 产品目录页面： | 635 (CN2011-ZH PDF) |
| 其它名称： | 813-1018 |
DLP-USB232M User ’s Manual
? TXDEN Timing fix
TXDEN timing has now been fixed to remove the external
delay that was previously required for RS485 applications
at high baud rates. TXDEN now works correctly during a
transmit send-break condition.
? Improved PreScaler Granularity
The previous version of the Prescaler supported division
by ( n + 0 ), ( n + 0.125 ), ( n + 0.25 ) and ( n + 0.5 )
where n is an integer between 2 and 16,384 ( 214 ). To
these have been added ( n + 0.375 ), ( n + 0.625 ), ( n
+ 0.75 ) and ( n+ 0.875 ) which can be used to improve
the accuracy of some baud rates and generate new baud
rates which were previously impossible ( especially with
higher baud rates ).
? PreScaler Divide By 1 Fix
The previous device had a problem when the integer part
of the divisor was set to 1. In the 2nd generation device,
setting the prescaler value to 1 gives a baud rate of 2
million baud and setting it to zero gives a baud rate of 3
million baud. Non-integer division is not supported with
divisor values of 0 and 1.
FPGA as supplied by vendors such as Altera and Xilinx.
The FPGA device would normally be un-configured ( i.e.
have no defined function ) at power-up.
Application software on the PC could use Bit Bang Mode
to download configuration data to the FPGA which would
define it’s hardware function, then after the FPGA device
is configured the FT232BM can switch back into UART
interface mode to allow the programmed FPGA device
to communicate with the PC over USB. This approach
allows a customer to create a “generic” USB peripheral
whose hardware function can be defined under control of
the application software. The FPGA based hardware can
be easily upgraded or totally changed simply by changing
the FPGA configuration data file. Application notes,
software and development modules for this application
area will be available from FTDI and other 3rd party
developers.
? USB 2.0 (full speed option)
A new EEPROM based option allows the FT232BM to
return a USB 2.0 device descriptor as opposed to USB
1.1. Note: The device would be a USB 2.0 Full Speed
device (12Mb/s) as opposed to a USB 2.0 High Speed
device (480Mb/s).
? Bit Bang Mode
The 2nd generation device has a new option referred to
as “Bit Bang” mode. In Bit Bang mode, the eight UART
interface control lines can be switched between UART
interface mode and an 8-bit Parallel IO port. Data packets
can be sent to the device and they will be sequentially
sent to the interface at a rate controlled by the prescaler
setting. As well as allowing the device to be used stand-
alone as a general purpose IO controller for example
controlling lights, relays and switches, some other
interesting possibilities exist. For instance, it may be
possible to connect the device to an SRAM configurable
Copyright ? DLP Design 2002
Page 3 of 12
相关PDF资料 |
PDF描述 |
|---|---|
| DLP-USB232R | MODULE USB-TO-SRL UART 18-DIP |
| DLP-USB245M-G | MODULE USB-TO-TTL PARL FIFO CONV |
| DLP-USB245R | MODULE USB-TO-PARL FIFO 18-DIP |
| DM163001 | BOARD DEMO PICDEM-1 |
| DM163004-LT | BOARD DEMO PICDEM.NET |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DLP-USB232M-G2 | 功能描述:MODULE USB-TO-TTL SRL UART CONV 制造商:dlp design inc. 系列:- 零件状态:在售 类型:USB 至串行 转换自（适配器端）:USB - B 2.0 母头 转换至（适配器端）:DIL（Dual Inline） 接口:UART 特性:- 包括:- 标准包装:1 |
| DLP-USB232R | 功能描述:界面模块 USB-TO-SERIAL UART INTERFACE MODULE RoHS:否 制造商:4D Systems 产品:Serial Converters 通道/端口数量: 数据速率: 接口类型:USB, UART 工作电源电压:3.3 V, 5 V 最大工作温度: |
| DLP-USB245M | 功能描述:界面模块 USB-FIFO Adapter RoHS:否 制造商:4D Systems 产品:Serial Converters 通道/端口数量: 数据速率: 接口类型:USB, UART 工作电源电压:3.3 V, 5 V 最大工作温度: |
| DLP-USB245M-G | 功能描述:界面模块 USB-FIFO Adapter RoHS:否 制造商:4D Systems 产品:Serial Converters 通道/端口数量: 数据速率: 接口类型:USB, UART 工作电源电压:3.3 V, 5 V 最大工作温度: |
| DLP-USB245R | 功能描述:界面模块 USB-TO-PARALLEL FIFO INTERFACE MODULE RoHS:否 制造商:4D Systems 产品:Serial Converters 通道/端口数量: 数据速率: 接口类型:USB, UART 工作电源电压:3.3 V, 5 V 最大工作温度: |
发布紧急采购，3分钟左右您将得到回复。