参数资料
| 型号： | DLP-USB245M-G |
| 厂商： | DLP Design Inc |
| 文件页数： | 8/15页 |
| 文件大小： | 0K |
| 描述： | MODULE USB-TO-TTL PARL FIFO CONV |
| 产品目录绘图： | DLP-USBxxxM-G |
| 标准包装： | 1 |
| 系列： | DLP-USB245M |
| 类型： | USB 至 FIFO |
| 连接器类型： | USB-B 至 DIL（双直插式） |
| 产品目录页面： | 635 (CN2011-ZH PDF) |
| 其它名称： | 813-1019 |
Device Configuration Examples
DLP-USB245M
USB 'B'
Connector
8
data
WR
RD#
DLP-USB245M User Manual
Microcontroller
TXE#
RXF#
Basic Connection to a Microcontroller
USB Bus Powered and Self Powered Configuration
Figure 1 illustrates a typical USB bus powered configuration. A USB Bus
Figure 1
1
3
10
11
12
24
13
Powered device gets its power from the USB bus. Basic rules for USB Bus
power devices are as follows –
a) On plug-in, the device must draw no more than 100mA
b) On USB Suspend the device must draw no more than 500uA.
c) A Bus Powered High Power Device ( one that draws more than 100mA )
should use the SLEEP# pin to keep the current below 100mA on plug-in and
Basic Bus-Powered
5V System
500uA on USB suspend.
d) A device that consumes more than 100mA can not be plugged into a USB
Bus Powered Hub
e) No device can draw more that 500mA from the USB Bus.
f) The power descriptor in the EEPROM should be programmed to a value of zero.
Figure 2 illustrates a typical USB self powered
configuration. A USB Self Powered device gets its power
from its own Power Supply and does not draw current
from the USB bus.
Figure 2
8
5.0V
Basic rules for USB Self power devices are as follows –
a) A Self-Powered device should not force current down
the USB bus when the USB Host or Hub Controller is
powered down.
b) A Self Powered Device can take as much current as it
likes during normal operation and USB suspend as it has
its own Power Supply.
5.0V
3
10
11
12
data
WR
RD#
TXE#
RXF#
Self-Powered
5V System
c) A Self Powered Device can be used with any USB Host and both Bus and Self Powered USB Hubs.
Copyright ? DLP Design 2002
Page 8 of 15
相关PDF资料 |
PDF描述 |
|---|---|
| DLP-USB245R | MODULE USB-TO-PARL FIFO 18-DIP |
| DM163001 | BOARD DEMO PICDEM-1 |
| DM163004-LT | BOARD DEMO PICDEM.NET |
| DM163005 | KIT EVAL PIC16C432/433 LIN BUSS |
| DM163007 | PICDEM CAN-LIN 1 FOR 18C658/858 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DLP-USB245R | 功能描述:界面模块 USB-TO-PARALLEL FIFO INTERFACE MODULE RoHS:否 制造商:4D Systems 产品:Serial Converters 通道/端口数量: 数据速率: 接口类型:USB, UART 工作电源电压:3.3 V, 5 V 最大工作温度: |
| DLP-UT1 | 功能描述:工业温度传感器 TEMPERATURE SENSOR RoHS:否 制造商:Texas Instruments 准确性:1 C 功能:Temperature Sensing 25 摄氏度时的电阻: 温度范围:- 55 C to + 127 C 电源电流: 电源电压:2.7 V to 5.5 V |
| DLP-UTH8 | 功能描述:数据记录与采集 DLP SENSOR HUB RoHS:否 制造商:Lantronix 描述/功能:Analog device server 显示器类型:None 电流额定值: |
| DLPVA-100-F | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Low Frequency Voltage Amplifier |
| DLPVA-100-F-D | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Low Frequency Voltage Amplifier |
发布紧急采购，3分钟左右您将得到回复。