参数资料
| 型号： | DLP-USB245R |
| 厂商： | DLP Design Inc |
| 文件页数： | 6/13页 |
| 文件大小： | 0K |
| 描述： | MODULE USB-TO-PARL FIFO 18-DIP |
| 产品目录绘图： | DLP-USB2(32, 45)R |
| 标准包装： | 1 |
| 类型： | USB 至 FIFO |
| 连接器类型： | 迷你型 B 至 DIL（双直插式） |
| 产品目录页面： | 635 (CN2011-ZH PDF) |
| 其它名称： | 813-1025 |
5.0 EEPROM WRITE UTILITY
The DLP-USB245R has the option to accept manufacturer-specific information that is written
into EEPROM memory. Parameters that can be programmed include the VID and the PID
identifiers, the manufacturer's product string and a serial number.
MPROG is the latest EEPROM programming utility for the FT245R device. You must install the
latest release of the CDM drivers in order to run this application. If you have CDM drivers
installed on the PC that is to perform the EEPROM write process, you can run MPROG and
update the EEPROM contents with either mode (VCP or D2XX) active.
6.0 QUICK START GUIDE
This guide requires the use of a Windows XP/Vista PC that is equipped with a USB port.
1. Download the CDM device drivers from either www.dlpdesign.com or www.ftdichip.com .
Unzip the drivers into a folder on the hard drive.
2. Connect the DLP-USB245R board to the PC via a USB ‘A’ to mini-B cable. This action
initiates the loading of the USB drivers. When prompted, select the folder where the device
drivers were stored in Step 1. Windows will then complete the installation of the device
drivers for the DLP-USB245R module. The next time the DLP-USB245R module is
attached, the host PC will immediately load the correct drivers without any prompting.
Reboot the PC if prompted to do so.
At this point, the DLP-USB245R is ready for use. Note that the DLP-USB245R will appear non-
responsive if data sent from the host PC is not read from the FT245R device by an attached
microcontroller, microprocessor, DSP, FPGA, ASIC, etc.
7.0 PINOUT DESCRIPTION
Pin 18
Pin 1
USB
Pin 10
Pin 9
Top View
(Interface Headers on bottom of PCB)
Rev. 1.0 (November 2008)
6
? DLP Design, Inc.
相关PDF资料 |
PDF描述 |
|---|---|
| DM163001 | BOARD DEMO PICDEM-1 |
| DM163004-LT | BOARD DEMO PICDEM.NET |
| DM163005 | KIT EVAL PIC16C432/433 LIN BUSS |
| DM163007 | PICDEM CAN-LIN 1 FOR 18C658/858 |
| DM163008 | KIT MCP2120/2150 FOR IRDA COMM |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DLP-UT1 | 功能描述:工业温度传感器 TEMPERATURE SENSOR RoHS:否 制造商:Texas Instruments 准确性:1 C 功能:Temperature Sensing 25 摄氏度时的电阻: 温度范围:- 55 C to + 127 C 电源电流: 电源电压:2.7 V to 5.5 V |
| DLP-UTH8 | 功能描述:数据记录与采集 DLP SENSOR HUB RoHS:否 制造商:Lantronix 描述/功能:Analog device server 显示器类型:None 电流额定值: |
| DLPVA-100-F | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Low Frequency Voltage Amplifier |
| DLPVA-100-F-D | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Low Frequency Voltage Amplifier |
| DLPVA-100-F-S | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Low Frequency Voltage Amplifier |
发布紧急采购，3分钟左右您将得到回复。