参数资料
型号: DM300021
厂商: Microchip Technology
文件页数: 23/60页
文件大小: 0K
描述: MODULE PWR DSPICDEM MC1H HV 3PHS
标准包装: 1
主要目的: 电源管理,电机控制
嵌入式: 是,MCU,16 位
已用 IC / 零件: dsPIC33FJxxxMC
主要属性: 3 相高压电源模块
次要属性: 运动传感器输入:霍尔传感器或光学编码器
已供物品: 子板
Set Up and Operation
FIGURE 1-6:
30
25
20
15
10
5
0
DC BUS VOLTAGE RIPPLE
PFC Active 208V AC
50 Hz Input 350V Bus
PFC Choke in Circuit
208V AC 50Hz
PFC Choke in Circuit
110V AC 60Hz
0
200
400
600
800
1000
Output Power (Watts)
Note that if operating without the PFC inductor in circuit that the DC bus voltage ripple
is similar in magnitude to that shown above but the average DC bus voltage is higher
for the same power.
1.3.5
Brake Chopper Output Current Limits
The brake chopper switch and diode are capable of providing the full rated output of
4A within the entire operating range (voltage, temperature and at up to 16 kHz
modulation frequency) of the system. The brake chopper diode has been oversized
from that usually required due to the inductance of an external braking resistor and
cables so that the brake chopper is more general purpose.
Note:
The user should note that the over current trip levels are set above the peak
of the rated output. This is to prevent nuisance trips. The user should avoid
operating the system beyond the peak output of 4A continuously. Operation
of the system just beneath the over-current trip of 4.9A may affect long-term
reliability of the brake chopper switch and should be avoided. The value of
the brake chopper resistor should be chosen to ensure no more than 4A
can flow, even at the peak DC bus voltage.
1.4
DETAILED DESCRIPTION OF OPERATION
1.4.1
AC Supply Input Stage (Appendix A, Sheet 1)
The AC supply input stage of the board consists of the following components:
? F1 – 1.25" x 0.25" 5A 250 VAC high rupture fuse – Note: only replace with part of
the same rating.
? C8 – X2 class film capacitor to aid in the suppression of AC supply transients.
? R11 – A 1W high voltage resistor which acts to discharge C8.
? C9, C10 – Y class film capacitors to aid in the suppression of AC supply transients
and to also provide a low impedance return path for any currents that flows from
the power device tabs to the heat sink and enclosure due to capacitive coupling.
? BR1 – A single-phase bridge rectifier to convert the incoming AC into DC suitable
for input to the power conditioning stage.
? V1 – A metal oxide varistor located across the incoming supply lines to suppress
high energy transients.
? 2003 Microchip Technology Inc.
DS70096A-page 17
相关PDF资料
PDF描述
DM300022 MODULE PWR DSPICDEM MC1L LV 3PHS
DM320002 BOARD EXPANSION PIC32 I/O
DM320003-2 KIT EVAL PIC32 USB II STARTER
DM320003 BOARD DEMO USB PIC32 OTG
DM320005 BOARD EXPANSION FOR PIC32 KIT
相关代理商/技术参数
参数描述
DM300021 制造商:Microchip Technology Inc 功能描述:MODULE dsPICDEM MC1H 3 PHASE
DM300022 功能描述:开发板和工具包 - PIC / DSPIC Low V Pwr Module RoHS:否 制造商:Microchip Technology 产品:Starter Kits 工具用于评估:chipKIT 核心:Uno32 接口类型: 工作电源电压:
DM300023 功能描述:开发板和工具包 - PIC / DSPIC dsPICDEM SMPS Buck Demo Brd RoHS:否 制造商:Microchip Technology 产品:Starter Kits 工具用于评估:chipKIT 核心:Uno32 接口类型: 工作电源电压:
DM300024 功能描述:开发板和工具包 - PIC / DSPIC dsPICDEM 1.1 GP RoHS:否 制造商:Microchip Technology 产品:Starter Kits 工具用于评估:chipKIT 核心:Uno32 接口类型: 工作电源电压:
DM300027 功能描述:开发板和工具包 - PIC / DSPIC 16-bit Starter Demo Board RoHS:否 制造商:Microchip Technology 产品:Starter Kits 工具用于评估:chipKIT 核心:Uno32 接口类型: 工作电源电压: