- 您现在的位置：买卖IC网 > PDF目录9449 > DS1077LU-66 (Maxim Integrated Products)IC ECONOSCILLATOR 66.7MHZ 8-USOP PDF资料下载
参数资料
| 型号： | DS1077LU-66 |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 20/21页 |
| 文件大小： | 0K |
| 描述： | IC ECONOSCILLATOR 66.7MHZ 8-USOP |
| 应用说明： | DS1077L Application Notes |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 50 |
| 系列： | EconOscillator™ |
| 类型： | 振荡器，固定频率（双路） |
| 频率： | 8.13kHz ~ 66.7MHz |
| 电源电压： | 2.7 V ~ 3.6 V |
| 电流 - 电源： | 30mA |
| 工作温度： | -40°C ~ 85°C |
| 封装/外壳： | 8-TSSOP，8-MSOP（0.118"，3.00mm 宽） |
| 包装： | 管件 |
| 供应商设备封装： | 8-uMAX |
| 安装类型： | 表面贴装 |
DS1077L
8 of 21
Accordingly, the following bus conditions have been defined:
Bus not busy: Both data and clock lines remain high.
Start data transfer: A change in the state of the data line from high to low while the clock is high
defines a START condition.
Stop data transfer: A change in the state of the data line from low to high while the clock line is high
defines the STOP condition.
Data valid: The state of the data line represents valid data when, after a START condition, the data line is
stable for the duration of the HIGH period of the clock signal. The data on the line must be changed
during the LOW period of the clock signal. There is one clock pulse per bit of data.
Each data transfer is initiated with a START condition and terminated with a STOP condition. The
number of data bytes transferred between START and STOP conditions is not limited, and is determined
by the master device. The information is transferred byte-wise and each receiver acknowledges with a
ninth bit.
Within the bus specifications, a regular mode (100kHz clock rate) and a fast mode (400kHz clock rate)
are defined. The DS1077L works in both modes.
Acknowledge: Each receiving device, when addressed, is obliged to generate an acknowledge after the
reception of each byte. The master device must generate an extra clock pulse which is associated with this
acknowledge bit.
A device that acknowledges must pull down the SDA line during the acknowledge clock pulse in such a
way that the SDA line is stable low during the high period of the acknowledge-related clock pulse. Of
course, setup and hold times must be taken into account. When the DS1077L EEPROM is being written
to, it will not be able to perform additional responses. In this case, the slave DS1077L will send a ‘not
acknowledge’ to any data transfer request made by the master. It will resume normal operation when the
EEPROM operation is complete.
A master must signal an end-of-data to the slave by not generating an acknowledge bit on the last byte
that has been clocked out of the slave. In this case, the slave must leave the data line high to enable the
master to generate the STOP condition.
DATA TRANSFER ON 2-WIRE SERIAL BUS Figure 2
MSB
slave address
R/W
direction
bit
SDA
SCL
START
CONDITION
12
678
9
12
8
9
STOP CONDITION
OR
REPEATED
START CONDITION
3 - 8
acknowledgement
signal from receiver
acknowledgement
signal from receiver
ACK
repeated if more bytes
are transferred
相关PDF资料 |
PDF描述 |
|---|---|
| DS1077LZ-66+ | IC ECONOSCILLATOR 66.7MHZ 8SOIC |
| VI-B4H-IU-F2 | CONVERTER MOD DC/DC 52V 200W |
| DS1077LZ-66 | IC ECONOSCILLATOR 66.7MHZ 8-SOIC |
| VI-B4F-IU-F4 | CONVERTER MOD DC/DC 72V 200W |
| DS1077LZ-60+ | IC ECONOSCILLATOR 60MHZ 8SOIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DS1077LU-66+ | 功能描述:可编程振荡器 EconOscillator/Dvdr 66Mhz 118mil 2-Wire RoHS:否 制造商:IDT 封装 / 箱体:5 mm x 7 mm x 1.5 mm 频率:15.476 MHz to 866.67, 975 MHz to 1300 MHz 频率稳定性:+/- 50 PPM 电源电压:3.63 V 负载电容:10 pF 端接类型:SMD/SMT 输出格式:LVPECL 最小工作温度:- 40 C 最大工作温度:+ 85 C 尺寸:7 mm W x 5 mm L x 1.5 mm H 封装: |
| DS1077LU-66+T | 功能描述:可编程振荡器 EconOscillator/Dvdr 66Mhz 118mil 2-Wire RoHS:否 制造商:IDT 封装 / 箱体:5 mm x 7 mm x 1.5 mm 频率:15.476 MHz to 866.67, 975 MHz to 1300 MHz 频率稳定性:+/- 50 PPM 电源电压:3.63 V 负载电容:10 pF 端接类型:SMD/SMT 输出格式:LVPECL 最小工作温度:- 40 C 最大工作温度:+ 85 C 尺寸:7 mm W x 5 mm L x 1.5 mm H 封装: |
| DS1077LZ-40 | 功能描述:可编程振荡器 RoHS:否 制造商:IDT 封装 / 箱体:5 mm x 7 mm x 1.5 mm 频率:15.476 MHz to 866.67, 975 MHz to 1300 MHz 频率稳定性:+/- 50 PPM 电源电压:3.63 V 负载电容:10 pF 端接类型:SMD/SMT 输出格式:LVPECL 最小工作温度:- 40 C 最大工作温度:+ 85 C 尺寸:7 mm W x 5 mm L x 1.5 mm H 封装: |
| DS1077LZ-40/T&R | 制造商:Maxim Integrated Products 功能描述:3V OSC 2WIRE 40MHZ 8P SOIC T&R - Tape and Reel |
| DS1077LZ-40/T&R | 功能描述:可编程振荡器 EconOscillator/Dvdr 40Mhz 150mil 2-Wire RoHS:否 制造商:IDT 封装 / 箱体:5 mm x 7 mm x 1.5 mm 频率:15.476 MHz to 866.67, 975 MHz to 1300 MHz 频率稳定性:+/- 50 PPM 电源电压:3.63 V 负载电容:10 pF 端接类型:SMD/SMT 输出格式:LVPECL 最小工作温度:- 40 C 最大工作温度:+ 85 C 尺寸:7 mm W x 5 mm L x 1.5 mm H 封装: |
发布紧急采购，3分钟左右您将得到回复。