- 您现在的位置：买卖IC网 > PDF目录97859 > DS1284 (MAXIM INTEGRATED PRODUCTS INC) 1 TIMER(S), REAL TIME CLOCK, PDIP28 PDF资料下载
参数资料
| 型号： | DS1284 |
| 厂商： | MAXIM INTEGRATED PRODUCTS INC |
| 元件分类： | Timer or RTC |
| 英文描述： | 1 TIMER(S), REAL TIME CLOCK, PDIP28 |
| 封装： | 0.600 INCH, PLASTIC, DIP-28 |
| 文件页数： | 6/18页 |
| 文件大小： | 299K |
| 代理商： | DS1284 |
DS1284/DS1286
14 of 18
NOTES:
1.
WE is high for a read cycle.
2.
OE = V
IH or VIL. If OE = VIH during write cycle, the output buffers remain in a high-impedance state.
3. tWP is specified as the logical AND of CE and WE. tWP is measured from the latter of CE or WE going
low to the earlier of
CE or WE going high.
4. tDS or tDH are measured from the earlier of CE or WE going high.
5. tDH is measured from WE going high. If CE is used to terminate the write cycle, then tDH = 20ns.
6. If the
CE low transition occurs simultaneously with or later than the WE low transition in write cycle
1, the output buffers remain in a high-impedance state during this period.
7. If the
CE high transition occurs prior to or simultaneously with the WE high transition, the output
buffers remain in a high-impedance state during this period.
8. If
WE is low or the WE low transition occurs prior to or simultaneously with the CE low transition,
the output buffers remain in a high-impedance state during this period.
9. Each DS1284/DS1286 is marked with a four-digit date code AABB. AA designates the year of
manufacture. BB designates the week of manufacture. The expected tDR is defined as starting at the
date of manufacture.
10. All voltages are referenced to ground.
11. Applies to both interrupt pins when the alarms are set to pulse.
12. Interrupt output occurs within 100ns on the alarm condition existing.
13.
RTC modules can be successfully processed through conventional wave-soldering techniques as long
as temperature exposure to the lithium energy source contained within does not exceed +85°C.
However, post-solder cleaning with water-washing techniques is acceptable, provided that ultrasonic
vibrations are not used to prevent crystal damage.
AC TEST CONDITIONS
Output Load: 100pF + 1TTL Gate
Input Pulse Levels: 0 to 3.0V
Timing Measurement Reference Levels
Input: 1.5V
Output: 1.5V
Input Pulse Rise and Fall Times: 5ns
PACKAGE INFORMATION
For the latest package outline information and land patterns, go to www.maxim-ic.com/packages.
PACKAGE TYPE
PACKAGE CODE
DOCUMENT NO.
28 PDIP
P28+9
28 PLCC
Q28+11
28 EDIP
MDP28+1
相关PDF资料 |
PDF描述 |
|---|---|
| DS1284QN | 1 TIMER(S), REAL TIME CLOCK, PQCC28 |
| DS1286 | 1 TIMER(S), REAL TIME CLOCK, DIP28 |
| DS12885 | 1 TIMER(S), REAL TIME CLOCK, PDIP24 |
| DS12885T | 1 TIMER(S), REAL TIME CLOCK, PQFP32 |
| DS12887A | 1 TIMER(S), REAL TIME CLOCK, PDIP24 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DS1284+ | 功能描述:实时时钟 RoHS:否 制造商:Microchip Technology 功能:Clock, Calendar. Alarm RTC 总线接口:I2C 日期格式:DW:DM:M:Y 时间格式:HH:MM:SS RTC 存储容量:64 B 电源电压-最大:5.5 V 电源电压-最小:1.8 V 最大工作温度:+ 85 C 最小工作温度: 安装风格:Through Hole 封装 / 箱体:PDIP-8 封装:Tube |
| DS1284N | 功能描述:实时时钟 RoHS:否 制造商:Microchip Technology 功能:Clock, Calendar. Alarm RTC 总线接口:I2C 日期格式:DW:DM:M:Y 时间格式:HH:MM:SS RTC 存储容量:64 B 电源电压-最大:5.5 V 电源电压-最小:1.8 V 最大工作温度:+ 85 C 最小工作温度: 安装风格:Through Hole 封装 / 箱体:PDIP-8 封装:Tube |
| DS1284Q | 功能描述:实时时钟 RoHS:否 制造商:Microchip Technology 功能:Clock, Calendar. Alarm RTC 总线接口:I2C 日期格式:DW:DM:M:Y 时间格式:HH:MM:SS RTC 存储容量:64 B 电源电压-最大:5.5 V 电源电压-最小:1.8 V 最大工作温度:+ 85 C 最小工作温度: 安装风格:Through Hole 封装 / 箱体:PDIP-8 封装:Tube |
| DS1284Q/T&R | 制造商:Maxim Integrated Products 功能描述:IC TIMEKEEPER WATCHDOG 28-PLCC |
| DS1284Q/T&R | 功能描述:实时时钟 RoHS:否 制造商:Microchip Technology 功能:Clock, Calendar. Alarm RTC 总线接口:I2C 日期格式:DW:DM:M:Y 时间格式:HH:MM:SS RTC 存储容量:64 B 电源电压-最大:5.5 V 电源电压-最小:1.8 V 最大工作温度:+ 85 C 最小工作温度: 安装风格:Through Hole 封装 / 箱体:PDIP-8 封装:Tube |
发布紧急采购，3分钟左右您将得到回复。