参数资料
型号: DS1375T+T&R
厂商: Maxim Integrated Products
文件页数: 12/13页
文件大小: 0K
描述: IC RTC SERIAL W/ALARM 6TDFN
产品培训模块: Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
标准包装: 2,500
类型: 时钟/日历
特点: 警报器,闰年,方波输出,涓流充电器
存储容量: 16B
时间格式: HH:MM:SS(12/24 小时)
数据格式: YY-MM-DD-dd
接口: I²C,2 线串口
电源电压: 1.7 V ~ 5.5 V
电压 - 电源,电池: 1.3 V ~ 5.5 V
工作温度: -40°C ~ 85°C
安装类型: 表面贴装
封装/外壳: 6-WDFN 裸露焊盘
供应商设备封装: 6-TDFN 裸露焊盘(3x3)
包装: 带卷 (TR)
DS1375
I2C Digital Input RTC with Alarm
8
_____________________________________________________________________
Table 2. Alarm Mask Bits
ALARM 1 REGISTER
MASK BITS (BIT 7)
DY/DT
A1M
ALARM RATE
X
1
Alarm once per
second
X
1
0
Alarm when seconds
match
X
1
0
Alarm when minutes
and seconds match
X
1
0
Alarm when hours,
minutes, and
seconds match
0
Alarm when date,
hours, minutes, and
seconds match
1
0
Alarm when day,
hours, minutes, and
seconds match
ALARM 2
REGISTER MASK
BITS (BIT 7)
DY/DT
A2M
ALARM RATE
X
1
Alarm once per minute
(00 seconds of every min)
X
1
0
Alarm when minutes match
X
1
0
Alarm when hours and
minutes match
0
Alarm when date, hours, and
minutes match
1
0
Alarm when day, hours, and
minutes match
Alarms
The DS1375 contains two time-of-day/date alarms.
Alarm 1 can be set by writing to registers 07h–0Ah.
Alarm 2 can be set by writing to registers 0Bh–0Dh.
The alarms can be programmed (by the alarm enable
and INTCN bits of the control register) to activate the
SQW/INT output on an alarm match condition. Bit 7 of
the time-of-day/date alarm registers are mask bits
(Table 2). When all the mask bits for each alarm are
logic 0, an alarm only occurs when the values in the
timekeeping registers match the corresponding values
stored in the time-of-day/date alarm registers. The
alarms can also be programmed to repeat every sec-
ond, minute, hour, day, or date. Table 2 shows the pos-
sible settings. Configurations not listed in the table
result in illogical operation.
The DY/DT bits (bit 6 of the alarm day/date registers)
control whether the alarm value stored in bits 0–5 of
that register reflects the day of the week or the date of
the month. If DY/DT is written to logic 0, the alarm is the
result of a match with date of the month. If DY/DT is
written to logic 1, the alarm is the result of a match with
day of the week.
When the RTC register values match alarm register set-
tings, the corresponding alarm flag A1F or A2F bit is
set to logic 1. If the corresponding alarm interrupt
enable A1IE or A2IE is also set to logic 1, and the
INTCN bit is set to logic 1, the alarm condition activates
the SQW/INT signal. The match is tested on the once-
per-second update of the time and date registers.
Special Purpose Registers
The DS1375 has two additional registers (control and
status) that control the RTC, alarms, and square-wave
output.
相关PDF资料
PDF描述
VI-J2Z-MZ CONVERTER MOD DC/DC 2V 10W
ISL23418TFRUZ-T7A IC DGTL POT 1CH 100K 10UTQFN
MS27473E24B35PB CONN PLUG 128POS STRAIGHT W/PINS
VI-J2V-MZ CONVERTER MOD DC/DC 5.8V 25W
VI-J2N-MZ CONVERTER MOD DC/DC 18.5V 25W
相关代理商/技术参数
参数描述
DS1380N 制造商:未知厂家 制造商全称:未知厂家 功能描述:NVRAM (Battery Based)
DS1380S 制造商:未知厂家 制造商全称:未知厂家 功能描述:NVRAM (Battery Based)
DS1380SN 制造商:未知厂家 制造商全称:未知厂家 功能描述:NVRAM (Battery Based)
DS1384 制造商:DALLAS 制造商全称:Dallas Semiconductor 功能描述:Watchdog Timekeeping Controller
DS1384FP 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:Watchdog Timekeeping Controller