- 您现在的位置：买卖IC网 > PDF目录9314 > DS1500YN (Maxim Integrated Products)IC RTC Y2KC W/NV CTRL 5V 32-DIP PDF资料下载
参数资料
| 型号： | DS1500YN |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 7/20页 |
| 文件大小： | 0K |
| 描述： | IC RTC Y2KC W/NV CTRL 5V 32-DIP |
| 标准包装： | 13 |
| 类型： | 时钟/日历 |
| 特点： | 警报器，闰年，NVSRAM，方波输出，监视计时器，Y2K |
| 存储容量： | 256B |
| 时间格式： | HH:MM:SS（24 小时） |
| 数据格式： | YY-MM-DD-dd |
| 接口： | 并联 |
| 电源电压： | 4.5 V ~ 5.5 V |
| 电压 - 电源，电池： | 2.5 V ~ 3.7 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 通孔 |
| 封装/外壳： | 32-DIP 模块（0.600"，15.24mm） |
| 供应商设备封装： | 32-EDIP |
| 包装： | 管件 |
DS1500 Y2K Watchdog RTC with Nonvolatile Control
15 of 20
Control A Register (0Eh)
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
BLF1
BLF2
PRS
PAB
TDF
KSF
WDF
IRQF
BLF1, Valid RAM and Time Bit 1 (0Eh Bit 7); BLF2, Valid RAM and Time Bit 2 (0Eh Bit 6)
These status bits give the condition of any batteries attached to the VBAT or VBAUX pins. The DS1500 constantly
monitors the battery voltage of the backup-battery sources (VBAT and VBAUX). The BLF1 and BLF2 bits are set to 1 if
the battery voltage on VBAT and VBAUX is less than VBLF, otherwise BLF1 and BLF2 bits are 0. BLF1 reflects the
condition of VBAT with BLF2 reflecting VBAUX. If either bit is read as 1, the voltage on the respective pin is inadequate
to maintain the RAM memory or clock functions. These bits are read only.
PRS, Reset Select Bit (0Eh Bit 5)
When set to 0, the PWR pin is set high-Z when the DS1500 goes into power-fail. When set to 1, the PWR pin
remains active upon entering power-fail.
PAB, Power Active-Bar Control Bit (0Eh Bit 4)
When this bit is 0, the PWR pin is in the active-low state. When this bit is 1, the PWR pin is in the high-impedance
state. The user can write this bit to 1 or 0. If either TDF AND TPE = 1 or KSF = 1, the PAB bit is cleared to 0. This
bit can be read or written.
TDF, Time-of-Day/Date Alarm Flag (0Eh Bit 3)
A 1 in the TDF bit indicates that the current time has matched the alarm time. If the TIE bit is also 1, the IRQ pin
goes low and a 1 appears in the IRQF bit. This bit is cleared by reading the register or writing it to 0.
KSF, Kickstart Flag (0Eh Bit 2)
This bit is set to 1 when a kickstart condition occurs or when the user writes it to 1. If the KIE bit is also 1, the IRQ
pin goes low and a 1 appears in the IRQF bit. This bit is cleared by reading the register or writing it to 0.
WDF, Watchdog Flag (0Eh Bit 1)
If the processor does not access the DS1500 with a write within the period specified in addresses 0Ch and 0Dh,
the WDF bit is set to 1. WDF is cleared by writing it to 0.
IRQF, Interrupt Request Flag (0Eh Bit 0)
The interrupt request flag (IRQF) bit is set to 1 when one or more of the following are true:
TDF = TIE = 1
KSF = KIE = 1
WDF = WDE = 1
i.e., IRQF = (TDF x TIE) + (KSF x KIE) + (WDF x WDE)
Any time the IRQF bit is 1, the IRQ pin is driven low.
Clearing IRQ and Flags
The time-of-day/date alarm flag (TDF), watchdog flag (WDF), kickstart flag (KSF) and interrupt request flag (IRQF)
are cleared by reading the flag register (0Eh). The address must be stable for a minimum of 15ns while CS and OE
are active. After the address stable requirement has been met, either a change in address, a rising edge of OE, or
a rising edge of CS causes the flags to be cleared. The IRQ pin goes inactive after the IRQF flag is cleared. TDF
and WDF can also be cleared by writing to 0.
相关PDF资料 |
PDF描述 |
|---|---|
| DS17285SN-3 | IC RTC 3V 2K NV RAM 24-SOIC |
| DS1315S-5/T&R | IC TIME CHIP PHANTOM 5V 16-SOIC |
| MS27466P23F55S | CONN RCPT 55POS WALL MT W/SCKT |
| MCP4361-104E/ML | IC POT 8BIT QUAD 100K 20QFN |
| MS3100C28-11S | CONN RCPT 22POS WALL MNT W/SCKT |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DS1501 | 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:Y2K-Compliant Watchdog Real-Time Clocks |
| DS1501_09 | 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:Y2K-Compliant Watchdog Real-Time Clocks |
| DS1501-7R | 功能描述:EURO-CASSETTE 100W 15V RoHS:否 类别:电源 - 外部/内部（非板载） >> DC DC Converters 系列:* 标准包装:1 系列:Quint 类型:隔离 输入电压:24V 输出:24V 输出数:1 输出 - 1 @ 电流（最大）:24 VDC @ 50A 输出 - 2 @ 电流（最大）:- 输出 - 3 @ 电流（最大）:- 输出 - 4 @ 电流（最大）:- 功率（瓦特）:1200W 安装类型:底座安装 工作温度:0°C ~ 40°C 效率:- 封装/外壳:模块 尺寸/尺寸:4.33" L x 9.09" W x 6.14" H（110mm x 231mm x 156mm） 包装:散装 电源（瓦特）- 最大:1200W 批准:- 其它名称:277-69722866365-NDQUINT-BAT/24DC/12AH |
| DS1501-DS1511 | 制造商:DALLAS 制造商全称:Dallas Semiconductor 功能描述:Y2K-Compliant Watchdog Real-Time Clocks |
| DS1501W | 功能描述:IC RTC WDOG Y2KC 3.3V 28-DIP RoHS:否 类别:集成电路 (IC) >> 时钟/计时 - 实时时钟 系列:- 产品培训模块:Obsolescence Mitigation Program 标准包装:1 系列:- 类型:时钟/日历 特点:警报器，闰年，SRAM 存储容量:- 时间格式:HH:MM:SS（12/24 小时） 数据格式:YY-MM-DD-dd 接口:SPI 电源电压:2 V ~ 5.5 V 电压 - 电源，电池:- 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-WDFN 裸露焊盘 供应商设备封装:8-TDFN EP 包装:管件 |
发布紧急采购，3分钟左右您将得到回复。