- 您现在的位置：买卖IC网 > PDF目录97860 > DS1501YSN (DALLAS SEMICONDUCTOR) 1 TIMER(S), REAL TIME CLOCK, PDSO28 PDF资料下载
参数资料
| 型号： | DS1501YSN |
| 厂商： | DALLAS SEMICONDUCTOR |
| 元件分类： | Timer or RTC |
| 英文描述： | 1 TIMER(S), REAL TIME CLOCK, PDSO28 |
| 封装： | 0.720 INCH, PLASTIC, SOIC-28 |
| 文件页数： | 30/30页 |
| 文件大小： | 291K |
| 代理商： | DS1501YSN |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页当前第30页
DS1501/DS1511
9 of 30
TIE - Time of Day/Date Alarm Interrupt Enable Bit (0FH bit 3)
The TIE bit allows the TDF Flag to assert an Interrupt. When the TDF flag bit is set to a "1", if TIE is a
"1", the IRQF flag bit will be set to a "1". Writing a "0" to the TIE bit will prevent the TDF flag from
setting the IRQF flag. This bit is automatically cleared to a logic “0” to by the internal Power on Reset
when power is applied and Vcc rises above the Power-fail Voltage.
KIE - Kickstart Enable Interrupt Bit (0FH bit 2)
The KIE bit allows the KSF Flag to assert an interrupt. When the KSF flag bit is set to a “1”, if KIE is a
“1”, the IRQF flag bit will be set to a “1”. Writing a “0” to the KIE bit will prevent the KSF flag from
setting the IRQF flag. This bit is automatically cleared to a logic “0” to by the internal Power on Reset
when power is applied and Vcc rises above the Power-fail Voltage.
WDE - Watchdog Enable Bit (0FH bit 1)
When WDE is set to a "1", the Watchdog function is enabled and either the IRQ or RST pin will be pulled
active based on the state of the WDS bit. This bit is automatically cleared to a logic “0” to by the internal
Power on Reset when power is applied and Vcc rises above the Power-fail Voltage.
WDS - Watchdog Steering Bit (0FH bit 0)
If WDS is a "0" when the Watchdog Flag Bit WDF is set to a "1", the IRQ pin will be pulled low. If
WDS is a "1" when WDF is set to a "1", the watchdog will output a negative pulse on the RST output for
a duration of 40 ms to 200 ms and the ‘IRQF’ flag will be set when the watchdog times out. The WDE
bit will reset to a "0" immediately after RST goes active. This bit is automatically cleared to a logic “0”
to by the internal Power on Reset when power is applied and Vcc rises above the Power-fail Voltage.
CLOCK OSCILLATOR CONTROL
The Clock oscillator may be stopped at any time. To increase the shelf life of a backup lithium battery
source, the oscillator can be turned off to minimize current drain from the battery. The EOSC bit is used
to control state of the oscillator, and must be set to a "0" for the oscillator to function.
READING THE CLOCK
When reading the clock and calendar data, it is recommended to halt updates to the external set of double
buffered RTC registers. This puts the external registers into a static state allowing data to be read without
register values changing during the read process. Normal updates to the internal registers continue while
in this state. External updates are halted when a ”0” is written into the Transfer Enable, TE, bit of
Control register B (0Fh). As long as a “0” remains in the Control register B (TE) bit, updating is halted.
After a halt is issued, the registers reflect the RTC count (day, date, and time) that was current at the
moment the halt command was issued. Normal updates to the external set of registers will resume within
1 second after the (TE) bit is set to a “1”.
SETTING THE CLOCK
It is also recommended to halt updates to the external set of double buffered RTC registers when writing
to the clock. The (TE) bit should be used as described above before loading the RTC registers with the
desired RTC count (day, date, and time) in 24-hour BCD format. Setting the (TE) bit to a “1” will
transfer the new values written, to the internal RTC registers and allow normal operation to resume.
相关PDF资料 |
PDF描述 |
|---|---|
| DS1511W | 1 TIMER(S), REAL TIME CLOCK, DMA28 |
| DS1511Y | 1 TIMER(S), REAL TIME CLOCK, DMA28 |
| DS1501YE | 1 TIMER(S), REAL TIME CLOCK, PDSO28 |
| DS1501WS | 1 TIMER(S), REAL TIME CLOCK, PDSO28 |
| DS1501Y | 1 TIMER(S), REAL TIME CLOCK, PDIP28 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DS1501YSN/T&R | 制造商:Maxim Integrated Products 功能描述:REAL TIME CLOCK PARALLEL 256BYTE 28SOIC - Tape and Reel |
| DS1501YSN+ | 功能描述:实时时钟 RoHS:否 制造商:Microchip Technology 功能:Clock, Calendar. Alarm RTC 总线接口:I2C 日期格式:DW:DM:M:Y 时间格式:HH:MM:SS RTC 存储容量:64 B 电源电压-最大:5.5 V 电源电压-最小:1.8 V 最大工作温度:+ 85 C 最小工作温度: 安装风格:Through Hole 封装 / 箱体:PDIP-8 封装:Tube |
| DS1501YSN+T&R | 制造商:Maxim Integrated Products 功能描述:IC RTC WDOG Y2K 5V IND 28-SOIC |
| DS1501YSN+T&R | 功能描述:实时时钟 RoHS:否 制造商:Microchip Technology 功能:Clock, Calendar. Alarm RTC 总线接口:I2C 日期格式:DW:DM:M:Y 时间格式:HH:MM:SS RTC 存储容量:64 B 电源电压-最大:5.5 V 电源电压-最小:1.8 V 最大工作温度:+ 85 C 最小工作温度: 安装风格:Through Hole 封装 / 箱体:PDIP-8 封装:Tube |
| DS1501YZ+ | 功能描述:实时时钟 Y2K-Compliant Watchdog RoHS:否 制造商:Microchip Technology 功能:Clock, Calendar. Alarm RTC 总线接口:I2C 日期格式:DW:DM:M:Y 时间格式:HH:MM:SS RTC 存储容量:64 B 电源电压-最大:5.5 V 电源电压-最小:1.8 V 最大工作温度:+ 85 C 最小工作温度: 安装风格:Through Hole 封装 / 箱体:PDIP-8 封装:Tube |
发布紧急采购，3分钟左右您将得到回复。