- 您现在的位置：买卖IC网 > PDF目录381719 > DS1615 (DALLAS SEMICONDUCTOR) Temperature Recorder(温度记录器) PDF资料下载
参数资料
| 型号： | DS1615 |
| 厂商： | DALLAS SEMICONDUCTOR |
| 元件分类： | 模拟信号调理 |
| 英文描述： | Temperature Recorder(温度记录器) |
| 中文描述： | SPECIALTY ANALOG CIRCUIT, PDIP16 |
| 封装： | 0.300 INCH, DIP-16 |
| 文件页数： | 16/20页 |
| 文件大小： | 138K |
| 代理商： | DS1615 |
DS1615
052698 16/20
perature and Low Temperature Threshold boundaries.
These pins, when used to drive LEDs, can be used to
provide a quick visual confirmation as to whether the
temperature remained within the user–defined limits.
Note that the Specification test command is ignored if
the ST button is pulled to ground when the command is
issued.
4. Read Temperature (55h)
Host Transmit:
D7
D6
D5
D4
D3
D2
D1
D0
0
1
0
1
0
1
0
1
DS1615 Response (Host Receives): When the device
is not currently datalogging (i.e., MIP = 0), the Tempera-
ture is immediately measured and value is written to the
Current Temperature register.
This command instructs the DS1615 to immediately
perform a temperature measurement and to store the
resulting value in the Current Temperature register. The
temperature value obtained from this command is not
stored in the datalog or histogram memory. After this
command has been executed, the user must read the
Temperature Ready (TR) bit in the Status register to
determine if the temperature measurement has been
completed. If the TR bit is a logic 1, the measurement
has been completed and the value in the Current Tem-
perature register is valid. If the TR bit is a logic 0, the
measurement has not been completed. This command
functions only when MIP = 0 (i.e., the device is not cur-
rently datalogging). If MIP =1, the DS1615 takes no
action in response to the command.
5. Clear Memory (A5h)
Host Transmit:
D7
D6
D5
D4
D3
D2
D1
D0
1
0
1
0
0
1
0
1
DS1615 Response: The contents of the datalog, histo-
gram, Temperature Alarm, Current Samples, Start Time
Stamp, Start Delay, and Sample Rate registers are
cleared if the Clear Memory command has been
enabled by setting the CLR bit in the Control register to a
one. After clearing the memory, the MEM CLR bit in the
Status register is set. The Clear Memory command
functions only if the oscillator is active. The DS1615 is
inaccessible for 500
μ
s after the Clear Memory com-
mand has been issued.
相关PDF资料 |
PDF描述 |
|---|---|
| DS1620 | Digital Thermometer and Thermostat(数字温度计和恒温控制器) |
| DS1621 | Digital Thermometer and Thermostat(数字温度计和调温器) |
| DS1623 | High Resolution Temperature Measurementwith Dallas Direct-to -digital Temperature Sensors(数字温度计) |
| DS1624 | Digital Thermometer and Memory(数字温度计和存储器) |
| DS1625 | Digital Thermometer and Thermostat(数字温度计和恒温控制器) |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DS1615K | 功能描述:KIT EVAL TEMPERATURE RECORDER RoHS:否 类别:编程器，开发系统 >> 过时/停产零件编号 系列:- 标准包装:1 系列:- 传感器类型:CMOS 成像，彩色（RGB） 传感范围:WVGA 接口:I²C 灵敏度:60 fps 电源电压:5.7 V ~ 6.3 V 嵌入式:否 已供物品:成像器板 已用 IC / 零件:KAC-00401 相关产品:4H2099-ND - SENSOR IMAGE WVGA COLOR 48-PQFP4H2094-ND - SENSOR IMAGE WVGA MONO 48-PQFP |
| DS1615S | 功能描述:板上安装温度传感器 RoHS:否 制造商:Omron Electronics 输出类型:Digital 配置: 准确性:+/- 1.5 C, +/- 3 C 温度阈值: 数字输出 - 总线接口:2-Wire, I2C, SMBus 电源电压-最大:5.5 V 电源电压-最小:4.5 V 最大工作温度:+ 50 C 最小工作温度:0 C 关闭: 安装风格: 封装 / 箱体: 设备功能:Temperature and Humidity Sensor |
| DS1615S/T&R | 制造商:Maxim Integrated Products 功能描述:IC RECORDER TEMP 5V 16-SOIC |
| DS1615S/T&R | 功能描述:IC RECORDER TEMP 5V 16-SOIC RoHS:否 类别:集成电路 (IC) >> 时钟/计时 - 实时时钟 系列:- 产品培训模块:Obsolescence Mitigation Program 标准包装:1 系列:- 类型:时钟/日历 特点:警报器，闰年，SRAM 存储容量:- 时间格式:HH:MM:SS（12/24 小时） 数据格式:YY-MM-DD-dd 接口:SPI 电源电压:2 V ~ 5.5 V 电压 - 电源，电池:- 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-WDFN 裸露焊盘 供应商设备封装:8-TDFN EP 包装:管件 |
| DS1615X | 制造商:DALLAS 制造商全称:Dallas Semiconductor 功能描述:Temperature Recorder |
发布紧急采购，3分钟左右您将得到回复。