- 您现在的位置：买卖IC网 > PDF目录22001 > DS1624S (Maxim Integrated)IC THERM/EEPROM DIG 256BYT 8SOIC PDF资料下载
参数资料
| 型号： | DS1624S |
| 厂商： | Maxim Integrated |
| 文件页数： | 15/18页 |
| 文件大小： | 424K |
| 描述： | IC THERM/EEPROM DIG 256BYT 8SOIC |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 88 |
| 功能： | 温度计，恒温计 |
| 传感器类型： | 内部 |
| 感应温度： | -55°C ~ 125°C |
| 精确度： | ±0.5°C（最小值） |
| 拓扑： | EEPROM，寄存器库 |
| 输出类型： | 2 线串行 |
| 输出警报： | 无 |
| 输出风扇： | 无 |
| 电源电压： | 2.7 V ~ 5.5 V |
| 工作温度： | -55°C ~ 125°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-SOIC（0.209"，5.30mm 宽） |
| 供应商设备封装： | 8-SO |
| 包装： | 管件 |
DS1624
1 f 1
PARAMETER SYMBOL CONDITIONS
MIN
TYP MAX UNITS NOTES
Fall Time of Both
SDA and
SCL Signals
t
F
Fast mode
20+0.1C
B
300
ns
8, 9, 11
Standard mode
20+0.1C
B
300
Setup Time for
STOPCondition
t
SU:STO
Fast mode
0.6
祍
11
Standard mode
4.0
Capacitive Load for
Each Bus Line
C
B
400
pF
In ut Ca acitance
C
5
F
NOTES:
1. All voltages are referenced to ground.
2. I/O pins of fast mode devices must not obstruct the SDA and SCL lines if V
DD
is switched off.
3. I
CC
specified with SDA pin open.
4. I
CC
specified with V
CC
at 5.0V and SDA, SCL = 5.0V, 0?/SPAN>C to +70?/SPAN>C.
5. EEPROM inactive, temperature sensor in shutdown mode.
6. Write occurs between 0癈 and +70癈.
7. After this period, the first clock pulse is generated.
8. A fast mode device can be used in a standard mode system, but the requirement t
SU:DAT
e 250ns must
then be met. This is automatically the case if the device does not stretch the low period of the SCL
signal. If such a device does stretch the low period of the SCL signal, it must output the next data bit
to the SDA line t
R(MAX)
+t
SU:DAT
= 1000+250 = 1250ns before the SCL line is released.
9. For example, if C
B
= 300pF, then t
R(MIN)
= t
F(MIN)
= 50ns.
10. A master device must provide a hold time of at least 300ns for the SDA signal to bridge the undefined
region of SCLs falling edge.
11. See the timing diagram (Figure 2). All timing is referenced to 0.9V
DD
and 0.1V
DD
.
12. Limits are 100% production tested at T
A
= +25癈 and/or T
A
= +85癈. Limits over the operating
temperature range and relevant supply voltage are guaranteed by design and characterization.
相关PDF资料 |
PDF描述 |
|---|---|
| 1N5819 | DIODE SCHOTTKY 1A 40V DO41 |
| VE-J6J-CW | CONVERTER MOD DC/DC 36V 100W |
| REC3-4815SRWZ/H/B | CONV DC/DC 3W 18-72VIN 15VOUT |
| VE-J62-CW | CONVERTER MOD DC/DC 15V 100W |
| D37S33E6GV00LF | CONN DSUB RCPT 37POS T/H RA GOLD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DS1624S/T&R | 制造商:Maxim Integrated Products 功能描述:TEMP SENSOR W/MEMORY 8P SOIC T&R - Tape and Reel 制造商:Maxim Integrated Products 功能描述:IC THERM/EEPROM DIG 256BYT 8SOIC |
| DS1624S/T&R | 功能描述:板上安装温度传感器 RoHS:否 制造商:Omron Electronics 输出类型:Digital 配置: 准确性:+/- 1.5 C, +/- 3 C 温度阈值: 数字输出 - 总线接口:2-Wire, I2C, SMBus 电源电压-最大:5.5 V 电源电压-最小:4.5 V 最大工作温度:+ 50 C 最小工作温度:0 C 关闭: 安装风格: 封装 / 箱体: 设备功能:Temperature and Humidity Sensor |
| DS1624S+ | 功能描述:板上安装温度传感器 Digital Thermometer & Memory RoHS:否 制造商:Omron Electronics 输出类型:Digital 配置: 准确性:+/- 1.5 C, +/- 3 C 温度阈值: 数字输出 - 总线接口:2-Wire, I2C, SMBus 电源电压-最大:5.5 V 电源电压-最小:4.5 V 最大工作温度:+ 50 C 最小工作温度:0 C 关闭: 安装风格: 封装 / 箱体: 设备功能:Temperature and Humidity Sensor |
| DS1624S+T&R | 制造商:Maxim Integrated Products 功能描述:TEMP SENSOR DGTL 2-WIRE 8SOIC - Tape and Reel 制造商:Maxim Integrated Products 功能描述:IC THERM/EEPROM DIG 256BYT 8SOIC 制造商:Maxim Integrated Products 功能描述:Board Mount Temperature Sensors Digital Thermometer & Memory |
| DS1624S+T&R | 功能描述:板上安装温度传感器 Digital Thermometer & Memory RoHS:否 制造商:Omron Electronics 输出类型:Digital 配置: 准确性:+/- 1.5 C, +/- 3 C 温度阈值: 数字输出 - 总线接口:2-Wire, I2C, SMBus 电源电压-最大:5.5 V 电源电压-最小:4.5 V 最大工作温度:+ 50 C 最小工作温度:0 C 关闭: 安装风格: 封装 / 箱体: 设备功能:Temperature and Humidity Sensor |
发布紧急采购，3分钟左右您将得到回复。