参数资料
型号: DS1629S+T&R
厂商: Maxim Integrated
文件页数: 8/23页
文件大小: 490K
描述: IC THERM/RTC/CALENDAR DIG 8-SOIC
产品培训模块: Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
标准包装: 2,500
功能: 温度计,恒温计
传感器类型: 内部
感应温度: -55°C ~ 125°C
精确度: ±2°C(最小值)
拓扑: ADC,比较器,振荡器,寄存器库
输出类型: I²C?/SMBus?
输出警报:
输出风扇:
电源电压: 2.7 V ~ 5.5 V
工作温度: -55°C ~ 125°C
安装类型: 表面贴装
封装/外壳: 8-SOIC(0.154",3.90mm 宽)
供应商设备封装: 8-SOIC
包装: 带卷 (TR)
DS1629
 
8 of 23
 
Thermometer Alarm
The thermostat comparator updates as soon as a temperature conversion is complete. When the DS1629s
temperature meets or exceeds the value stored in the high temperature trip register (T
H
), the TAF flag
becomes active (high), and will stay active until the temperature falls below the temperature stored in the
low temperature trigger register (T
L
).
 
The respective register can be accessed over the 2-wire bus via the Access T
H
 (A1h) or Access T
L
 (A2h)
commands. Reading from or writing to the respective register is controlled by the state of the R/
 bit in
the 2-wire control byte (see the 2-Wire Serial Data Bus section).
 
The format of the TH and TL registers is identical to that of the Thermometer register; that is, 9-bit twos
complement representation of the temperature in 癈. Both TH and TL are nonvolatile EEPROM registers
guaranteed to 2K write cycles.
 
Thermostat Setpoint (T
H
/T
L
) Format Table 3
 
S
2
6
 
2
5
 
2
4
 
2
3
 
2
2
 
2
1
 
2
0
 
MSB
MSb
 
 
unit = 癈
 
LSb
 
2
-1
 
0
0
0
0
0
0
0
LSB
 
Clock Alarm
The clock alarm flag (CAF) becomes active within one second after the second, minute, hour, and day (of
the week) of the clock register match the respective bytes in the clock alarm register. CAF will remain
active until the bus master writes to or reads from either the clock register via the C0h command or the
clock alarm register via the C7h command.
 
The format of the clock alarm register is shown in Figure 4. The power-up default of the DS1629 has the
clock alarm set to 12:00AM on Sunday. The register can be accessed over the 2-wire bus via the Access
Clock Alarm (C7h) command. Reading from or writing to the register is controlled by the state of the
R/
 bit in the 2-wire control byte (see the 2-Wire Serial Data Bus section).
 
The master must take precaution in programming bit 5 of byte 02h to ensure that the alarm setting
matches the current clock mode. Bits designated with a 0 are a dont care on writes, but will always read
out as a 0.
 
OPERATIONUSER SRAM
The DS1629 has memory reserved for any purpose the user intends. The page is organized as 32 bytewide
locations. The SRAM space is formatted as shown in Table 4. It is accessed via the 2-wire protocol 17h.
If the R/
 bit of the control byte is set to 1, the SRAM will be read and a 0 in this location allows the
master to write to the array. Reads or writes can be performed in the single byte or page mode. As such,
the master must write the byte address of the first data location to be accessed.
 
If the bus master is writing to/reading from the SRAM array in the page mode (multiple byte mode), the
address pointer will automatically wrap from address 1Fh to 00h following the ACK after byte 1Fh.
 
The SRAM array does not have a defined power-up default state. See the Command Set section for details
of the Access Memory protocol.
 
相关PDF资料
PDF描述
DS1631S+T&R IC THERMOMETER DIG HI-PREC 8SOIC
DS1721U+T&R IC THERMOMETER/STAT DIG HP 8USOP
DS1722S IC THERMOMETER DIG 3-WIRE 8-SOIC
DS1775R7+T&R IC THERMOM/STAT DIG 111 SOT-23-5
DS1821C+ IC THERMOMETER/STAT PROG 3-TO92
相关代理商/技术参数
参数描述
DS1630AB-100-IND 制造商:未知厂家 制造商全称:未知厂家 功能描述:NVRAM (Battery Based)
DS1630AB-120-IND 制造商:未知厂家 制造商全称:未知厂家 功能描述:NVRAM (Battery Based)
DS1630AB-70-IND 制造商:未知厂家 制造商全称:未知厂家 功能描述:NVRAM (Battery Based)
DS1630AB-85-IND 制造商:未知厂家 制造商全称:未知厂家 功能描述:NVRAM (Battery Based)
DS1630ABL-100 制造商:未知厂家 制造商全称:未知厂家 功能描述:NVRAM (Battery Based)