- 您现在的位置：买卖IC网 > PDF目录1994 > DS1678S/T&R (Maxim Integrated Products)IC RECORDER REALTIME EVENT 8SOIC PDF资料下载
参数资料
| 型号： | DS1678S/T&R |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 10/25页 |
| 文件大小： | 0K |
| 描述： | IC RECORDER REALTIME EVENT 8SOIC |
| 标准包装： | 2,000 |
| 类型： | 时间事件记录器 |
| 特点： | 警报器，闰年，NVSRAM，Y2K |
| 存储容量： | 32B |
| 时间格式： | HH:MM:SS（12/24 小时） |
| 数据格式： | YY-MM-DD-dd |
| 接口： | I²C，2 线串口 |
| 电源电压： | 4.5 V ~ 5.5 V |
| 电压 - 电源，电池： | 2.6 V ~ 3.5 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-SOIC（0.209"，5.30mm 宽） |
| 供应商设备封装： | 8-SO |
| 包装： | 带卷 (TR) |
DS1678 Real-Time Event Recorder
18 of 25
represents the total elapsed time since the previous event. The event counter is not incremented when the
ETC rolls over because a new event has not occurred.
The ETC is incremented as the selected seconds, minutes, or hours register of the RTC increments.
Because the RTC continues to run, even when the ETC is cleared to prepare for a new event, and the ETC
is incremented every time the selected byte in the RTC increments, the actual time resolution is not lost
even when events occur more frequently than the minimum time resolution selected. If an event occurs
half way between increments of the ETC, the first increment of the next event occurs when the seconds,
minutes, or hours register increments next, thus preserving the correct time to the resolution selected in
the DISx bits.
When the alarm interrupt output is used, the DISx bits should be set to zeros. An event-logging mission
cannot be started if the DISx bits are set to zero. This enables the alarm flag to generate an alarm interrupt
via the
INT output pin.
With the DIS0 bit set to one and the DIS1 bit set to zero, the ETC increments every time the seconds
register in the RTC is incremented. This gives the maximum resolution between events, but the counter
rolls over to the next two memory bytes when it reaches the maximum value. The largest interval between
events that can be accurately measured without using additional memory space and reducing the total
number of events able to be logged is 65,535 seconds, or about 18.2 hours. If the maximum time between
events could be greater than 18.2 hours, consider using one of the courser resolutions to conserve
memory.
With the DIS0 bit set to zero and the DIS1 bit set to one, the ETC increments every time the minutes
register in the RTC is incremented. This gives a medium resolution between events, but increases the
largest possible interval between events that can be accurately measured without using additional memory
space and reduces the total number of events able to be logged to 65,535 minutes, or about 45.5 days.
With both DISx bits set to one, the ETC increments every time the single hours byte in the RTC is
incremented. This gives the lowest resolution between events, but increases the largest possible interval
between events that can be accurately measured without using additional memory space and reduces the
total number of events able to be logged to 65,535 hours, or about 7.5 years.
If a second event occurs before the ETC is able to increment for the first time, all zeros are logged in the
event-log memory and the ETC resets. If this occurs, the time base remains correct as it is based on the
separate RTC incrementing, but the exact time of the event is no more accurate than the size of the time
increment that is chosen. For this reason, it is recommended to use the finest resolution possible for your
logging to minimize the errors. If the normal duration between events is several days or months, then a
few minutes or an hour may not be significant to your data accuracy.
Table 5. Duration Interval Select Bits
DIS1 DIS0
ELAPSED TIME COUNT
RESOLUTION
MAX TIME
BETWEEN EVENTS
0
Alarm Interrupt Output Enabled
—
0
1
Counter Increments Every Second
18.2 Hours
1
0
Counter Increments Every Minute
45.5 Days
1
Counter Increments Every Hour
7.5 Years
相关PDF资料 |
PDF描述 |
|---|---|
| DS1682S | IC TIMEKEEPER ALARM ELAPSE 8SOIC |
| DS1683S+T&R | IC REAL TIME EVENT REC 8SOIC |
| DS1685EN-5/T&R | IC RTC 5V 64BIT Y2K IND 24TSSOP |
| DS1688S+ | IC RTC W/NV RAM CTRL 28-SOIC |
| DS1689SN+T&R | IC RTC SER NV RAM CTRL IN 28SOIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DS1679 | 制造商:未知厂家 制造商全称:未知厂家 功能描述: |
| DS1679B | 制造商:Maxim from Components Direct 功能描述:THE MAXIM DS1679B IS A LOW-SIDE MOSFET DRIVER. - Rail/Tube 制造商:Maxim 功能描述:The Maxim DS1679B is a Low-Side MOSFET Driver. |
| DS1679BS | 制造商:Rochester Electronics LLC 功能描述: 制造商:Maxim Integrated Products 功能描述: |
| DS1679J | 制造商:NSC 制造商全称:National Semiconductor 功能描述:Hex TRI-STATEE TTL to MOS Drivers |
| DS1679J/A+ | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Memory Driver |
发布紧急采购，3分钟左右您将得到回复。