参数资料
型号: DS1855B-010+T&R
厂商: Maxim Integrated Products
文件页数: 1/21页
文件大小: 0K
描述: IC POT/MEM DIG NV 10/10K 16BGA
产品培训模块: Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
标准包装: 1,000
接片: 100,256
电阻(欧姆): 10k,100k
电路数: 2
温度系数: 标准值 750 ppm/°C
存储器类型: 非易失
接口: I²C(设备位址)
电源电压: 2.7 V ~ 5.5 V
工作温度: -40°C ~ 85°C
安装类型: 表面贴装
封装/外壳: 16-LBGA,CSPBGA
供应商设备封装: 16-CSBGA(4x4)
包装: 带卷 (TR)
1 of 21
19-6586; Rev 2; 1/13
FEATURES
Two Linear Taper Potentiometers
DS1855-010 (One 10k, 100 Position
and One 10k, 256 Position)
DS1855-020 (One 10k, 100 Position
and One 20k, 256 Position)
DS1855-050 (One 10k, 100 Position
and One 50k, 256 Position)
DS1855-100 (One 10k, 100 Position
and One 100k, 256 Position)
256 Bytes of EEPROM Memory
Access to Data and Potentiometer Control
via a 2-Wire Interface
External Write-Protect Pin to Protect Data
and Potentiometer Settings
Data and Potentiometer Settings Also Can
Be Write Protected Through Software
Control
Nonvolatile Wiper Storage
Operates from 3V or 5V Supplies
14-Pin TSSOP, 16-Ball CSBGA, and
14-Pin Flip-Chip Packages
Industrial Operating Temperature:
-40C to +85C
PIN CONFIGURATIONS
DESCRIPTION
The DS1855 dual nonvolatile (NV) digital potentiometer and secure memory consists of one 100-position
linear taper potentiometer, one 256-position linear taper potentiometer, 256 bytes of EEPROM memory,
and a 2-wire interface. The DS1855, which features a new software write protect, is an upgrade of the
DS1845. The DS1855 provides an ideal method for setting bias voltages and currents in control
applications using a minimum of circuitry. The EEPROM memory allows a user to store configuration or
calibration data for a specific system or device as well as provide control of the potentiometer wiper
settings. Any type of user information may reside in the first 248 bytes of this memory. The next two
addresses of EEPROM memory are for potentiometer settings and the remaining 6 bytes of memory are
reserved. These reserved and potentiometer registers should not be used for data storage. Access to this
EEPROM is via an industry-standard 2-wire bus. The interface I/O pins consist of SDA and SCL. The
wiper position of the DS1855, as well as EEPROM data, can be write protected through hardware using
the write-protect input pin (WP) or software using the 2-wire interface.
SDA
1
14
Vcc
SCL
2
13
H0
A0
3
12
W1
A1
4
11
H1
A2
5
10
L1
WP
6
9
W0
GND
7
8
L0
TSSOP (173 mils)
A
B
C
D
1
2
3
4
Top View
CSBGA (4mm x 4mm)
Flip Chip (100 mils x 100 mils) (Not Shown)
DS1855
Dual Nonvolatile Digital Potentiometer
and Secure Memory
相关PDF资料
PDF描述
DS1845B-050+T&R IC POT/MEM DUAL NV 50K 16-BGA
DS1845B-010+T&R IC POT/MEM DUAL NV 10K 16-BGA
7SB3125MUTCG 1 BIT BUS SWITCH UDFN6
DS3930E+T&R IC POT NV HEX I/O MEM 20-TSSOP
7SB384DTT1G 1 BIT DIGITAL SWITCH TSOP-5
相关代理商/技术参数
参数描述
DS1855B-020 功能描述:数字电位计 IC RoHS:否 制造商:Maxim Integrated 电阻:200 Ohms 温度系数:35 PPM / C 容差:25 % POT 数量:Dual 每 POT 分接头:256 弧刷存储器:Volatile 缓冲刷: 数字接口:Serial (3-Wire, SPI) 描述/功能:Dual Volatile Low Voltage Linear Taper Digital Potentiometer 工作电源电压:1.7 V to 5.5 V 电源电流:27 uA 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:TQFN-16 封装:Reel
DS1855B-050 功能描述:数字电位计 IC RoHS:否 制造商:Maxim Integrated 电阻:200 Ohms 温度系数:35 PPM / C 容差:25 % POT 数量:Dual 每 POT 分接头:256 弧刷存储器:Volatile 缓冲刷: 数字接口:Serial (3-Wire, SPI) 描述/功能:Dual Volatile Low Voltage Linear Taper Digital Potentiometer 工作电源电压:1.7 V to 5.5 V 电源电流:27 uA 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:TQFN-16 封装:Reel
DS1855B-050+ 功能描述:数字电位计 IC Dual NV w/Memory RoHS:否 制造商:Maxim Integrated 电阻:200 Ohms 温度系数:35 PPM / C 容差:25 % POT 数量:Dual 每 POT 分接头:256 弧刷存储器:Volatile 缓冲刷: 数字接口:Serial (3-Wire, SPI) 描述/功能:Dual Volatile Low Voltage Linear Taper Digital Potentiometer 工作电源电压:1.7 V to 5.5 V 电源电流:27 uA 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:TQFN-16 封装:Reel
DS1855B-100 制造商:DALLAS 制造商全称:Dallas Semiconductor 功能描述:Dual Nonvolatile Digital Potentiometer and Secure Memory
DS1855B-100+ 功能描述:数字电位计 IC Dual NV w/Memory RoHS:否 制造商:Maxim Integrated 电阻:200 Ohms 温度系数:35 PPM / C 容差:25 % POT 数量:Dual 每 POT 分接头:256 弧刷存储器:Volatile 缓冲刷: 数字接口:Serial (3-Wire, SPI) 描述/功能:Dual Volatile Low Voltage Linear Taper Digital Potentiometer 工作电源电压:1.7 V to 5.5 V 电源电流:27 uA 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:TQFN-16 封装:Reel