- 您现在的位置：买卖IC网 > PDF目录97865 > DS18S20 (MAXIM INTEGRATED PRODUCTS INC) DIGITAL TEMP SENSOR-SERIAL, 9BIT(s), 0.50Cel, RECTANGULAR, THROUGH HOLE MOUNT PDF资料下载
参数资料
| 型号： | DS18S20 |
| 厂商： | MAXIM INTEGRATED PRODUCTS INC |
| 元件分类： | Switch/Digital Output Temperature Sensor |
| 英文描述： | DIGITAL TEMP SENSOR-SERIAL, 9BIT(s), 0.50Cel, RECTANGULAR, THROUGH HOLE MOUNT |
| 封装： | TO-92, 3 PIN |
| 文件页数： | 4/23页 |
| 文件大小： | 252K |
| 代理商： | DS18S20 |
DS18S20
12 of 23
COPY SCRATCHPAD [48h]
This command copies the contents of the scratchpad TH and TL registers (bytes 2 and 3) to EEPROM. If
the device is being used in parasite power mode, within 10
s (max) after this command is issued the
master must enable a strong pullup on the 1-Wire bus for at least 10ms as described in the Powering the
DS18S20 section.
RECALL E
2 [B8h]
This command recalls the alarm trigger values (TH and TL) from EEPROM and places the data in bytes 2
and 3, respectively, in the scratchpad memory. The master device can issue read-time slots following the
Recall E
2 command and the DS18S20 will indicate the status of the recall by transmitting 0 while the
recall is in progress and 1 when the recall is done. The recall operation happens automatically at power-
up, so valid data is available in the scratchpad as soon as power is applied to the device.
READ POWER SUPPLY [B4h]
The master device issues this command followed by a read-time slot to determine if any DS18S20s on the
bus are using parasite power. During the read-time slot, parasite powered DS18S20s will pull the bus low,
and externally powered DS18S20s will let the bus remain high. See the Powering the DS18S20 section
for usage information for this command.
Table 2. DS18S20 Function Command Set
COMMAND
DESCRIPTION
PROTOCOL
1-Wire BUS ACTIVITY
AFTER COMMAND IS
ISSUED
NOTES
TEMPERATURE CONVERSION COMMANDS
Convert T
Initiates temperature
conversion.
44h
DS18S20 transmits conversion
status to master (not applicable
for parasite-powered
DS18S20s).
1
MEMORY COMMANDS
Read
Scratchpad
Reads the entire
scratchpad including the
CRC byte.
BEh
DS18S20 transmits up to 9
data bytes to master.
2
Write
Scratchpad
Writes data into
scratchpad bytes 2 and 3
(TH and TL).
4Eh
Master transmits 2 data bytes
to DS18S20.
3
Copy
Scratchpad
Copies TH and TL data
from the scratchpad to
EEPROM.
48h
None
1
Recall E
2
Recalls TH and TL data
from EEPROM to the
scratchpad.
B8h
DS18S20 transmits recall
status to master.
Read Power
Supply
Signals DS18S20 power
supply mode to the
master.
B4h
DS18S20 transmits supply
status to master.
Note 1:
For parasite-powered DS18S20s, the master must enable a strong pullup on the 1-Wire bus during temperature
conversions and copies from the scratchpad to EEPROM. No other bus activity may take place during this time.
Note 2:
The master can interrupt the transmission of data at any time by issuing a reset.
Note 3:
Both bytes must be written before a reset is issued.
相关PDF资料 |
PDF描述 |
|---|---|
| DS18S20-SL+T&R | DIGITAL TEMP SENSOR-SERIAL, 9BIT(s), 0.50Cel, RECTANGULAR, THROUGH HOLE MOUNT |
| DS18S20Z/T&R | DIGITAL TEMP SENSOR-SERIAL, 9BIT(s), 0.50Cel, RECTANGULAR, SURFACE MOUNT |
| DS1963L-F5 | SPECIALTY MEMORY CIRCUIT, MEDB2 |
| DS1963S | SPECIALTY MEMORY CIRCUIT, MEDB2 |
| DS1985-F3 | 2K X 8 EEPROM 3V, RDB2 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DS18S20/T&R | 制造商:Rochester Electronics LLC 功能描述: 制造商:Maxim Integrated Products 功能描述:IC THERM MICROLAN HI PREC TO-92 |
| DS18S20/T&R | 功能描述:板上安装温度传感器 RoHS:否 制造商:Omron Electronics 输出类型:Digital 配置: 准确性:+/- 1.5 C, +/- 3 C 温度阈值: 数字输出 - 总线接口:2-Wire, I2C, SMBus 电源电压-最大:5.5 V 电源电压-最小:4.5 V 最大工作温度:+ 50 C 最小工作温度:0 C 关闭: 安装风格: 封装 / 箱体: 设备功能:Temperature and Humidity Sensor |
| DS18S20+ | 功能描述:板上安装温度传感器 Prgmble Resolution 1-Wire Parasite Pwr RoHS:否 制造商:Omron Electronics 输出类型:Digital 配置: 准确性:+/- 1.5 C, +/- 3 C 温度阈值: 数字输出 - 总线接口:2-Wire, I2C, SMBus 电源电压-最大:5.5 V 电源电压-最小:4.5 V 最大工作温度:+ 50 C 最小工作温度:0 C 关闭: 安装风格: 封装 / 箱体: 设备功能:Temperature and Humidity Sensor |
| DS18S20+PAR | 功能描述:板上安装温度传感器 Prgmble Resolution 1-Wire Parasite Pwr RoHS:否 制造商:Omron Electronics 输出类型:Digital 配置: 准确性:+/- 1.5 C, +/- 3 C 温度阈值: 数字输出 - 总线接口:2-Wire, I2C, SMBus 电源电压-最大:5.5 V 电源电压-最小:4.5 V 最大工作温度:+ 50 C 最小工作温度:0 C 关闭: 安装风格: 封装 / 箱体: 设备功能:Temperature and Humidity Sensor |
| DS18S20+T&R | 制造商:Maxim Integrated Products 功能描述: 制造商:Maxim Integrated Products 功能描述:TEMP SENSOR DGTL 1-WIRE 3PIN TO-92 - Tape and Reel 制造商:Maxim Integrated Products 功能描述:IC THERM MICROLAN HI-PREC TO-92 制造商:Maxim Integrated Products 功能描述:Board Mount Temperature Sensors Prgmble Resolution 1-Wire Parasite Pwr |
发布紧急采购，3分钟左右您将得到回复。