- 您现在的位置：买卖IC网 > PDF目录21887 > DS1992L-F5+ (Maxim Integrated)IBUTTON MEMORY 1KBit F5 PDF资料下载
参数资料
| 型号： | DS1992L-F5+ |
| 厂商： | Maxim Integrated |
| 文件页数： | 6/17页 |
| 文件大小： | 0K |
| 描述： | IBUTTON MEMORY 1KBit F5 |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| RoHS指令信息： | IButton RoHS Compliance Plan |
| 标准包装： | 25 |
| 系列： | iButton® |
| 存储容量： | 128B |
| 存储器类型： | NVRAM |
| 产品目录页面： | 1431 (CN2011-ZH PDF) |
DS1992/DS1993
Copy Scratchpad [55h]
This command is used to copy data from the scratchpad to memory. After issuing the copy scratchpad
command, the user must provide a 3-byte authorization pattern. This pattern must exactly match the data
contained in the three address registers (TA1, TA2, E/S, in that order). If the pattern matches, the AA
(Authorization Accepted) flag is set and the copy begins. A logic 0 is transmitted after the data has been
copied until the user issues a reset pulse. Any attempt to reset the part is ignored while the copy is in
progress. Copy typically takes 30 μ s.
The data to be copied is determined by the three address registers. The scratchpad data from the
beginning offset through the ending offset is copied to memory, starting at the target address. Anywhere
from 1 to 32 Bytes can be copied to memory with this command. Whole Bytes are copied even if only
partially written. The AA flag is cleared only by executing a write scratchpad command.
Read Memory [F0h]
The read memory command can be used to read the entire memory. After issuing the command, the user
must provide the 2-Byte target address. After the two Bytes, the user reads data beginning from the target
address and may continue until the end of memory, at which point logic 1’s are read. It is important to
realize that the target address registers contains the address provided. The ending offset/data status Byte
is unaffected.
The hardware of the DS199x provides a means to accomplish error-free writing to the memory section.
To safeguard reading data in the 1-Wire environment and to simultaneously speed up data transfers, it is
recommended to packetize data into data packets of the size of one memory page each. Such a packet
would typically store a 16-bit CRC with each page of data to ensure rapid, error-free data transfers that
eliminate having to read a page multiple times to determine if the received data is correct or not. (See
Application Note 114 for the recommended file structure to be used with the 1-Wire environment.)
6 of 17
相关PDF资料 |
PDF描述 |
|---|---|
| MLEAWT-A1-0000-0002A5 | LED XLAMP ML-E WHITE SMD |
| MLEAWT-A1-0000-0002A4 | LED XLAMP ML-E WHITE SMD |
| DS1961S-F5+ | IBUTTON EEPROM 1KBit F5 |
| DS1985-F5+ | IBUTTON 16KBit ADD-ONLY F5 |
| DS1972-F5+ | IBUTTON EEPROM 1KBit F5 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DS1992L-F5/E00 | 功能描述:iButton RoHS:否 存储类型:SRAM 存储容量:512 B 组织: 工作电源电压:3 V to 5.25 V 接口类型:1-Wire 最大工作温度:+ 85 C 尺寸:17.35 mm x 5.89 mm 封装 / 箱体:F5 MicroCan 制造商:Maxim Integrated |
| DS1992L-F5+ | 功能描述:iButton 1Kb/4Kb Memory iButton RoHS:否 存储类型:SRAM 存储容量:512 B 组织: 工作电源电压:3 V to 5.25 V 接口类型:1-Wire 最大工作温度:+ 85 C 尺寸:17.35 mm x 5.89 mm 封装 / 箱体:F5 MicroCan 制造商:Maxim Integrated |
| DS1992LP | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Analog IC |
| DS1992LR | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Analog IC |
| DS1992P | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Analog IC |
发布紧急采购，3分钟左右您将得到回复。