参数资料
型号: DS2143
厂商: DALLAS SEMICONDUCTOR
元件分类: Digital Transmission Controller
英文描述: DATACOM, FRAMER, PDIP40
封装: 0.600 INCH, DIP-40
文件页数: 16/44页
文件大小: 552K
代理商: DS2143
DS2143/DS2143Q
23 of 44
EBCR1: E-BIT COUNT REGISTER 1 (Address=04 Hex)
EBCR2: E-BIT COUNT REGISTER 2 (Address=05 Hex)
(MSB)
(LSB)
EB7
EB6
EB5
EB4
EB3
EB2
EB1
EB0
EBCR2
EB15
EB14
EB13
EB12
EB11
EB10
EB9
EB8
EBCR1
SYMBOL
POSITION
NAME AND DESCRIPTION
EB15
EBCR1.7
MSB of the E-Bit error count.
EB0
EBCR2.0
LSB of the E-Bit error count.
E-bit Count Register 1 (EBCR1) is the most significant word and EBCR2 is the least significant word of
a 16-bit counter that records Far End Block Errors (FEBE) as reported in the first bit of frames 13 and 15
on E1 lines running with CRC4 multiframe. These count registers will increment once each time the
received E-bit is set to 0. Since the maximum E-bit count in a 1-second period is 1000, this counter
cannot saturate. The counter is disabled during loss of sync at either the FAS or CRC4 level; it will
continue to count if loss of sync occurs at the CAS level.
6.0 Sa DATA LINK CONTROL AND OPERATION
The DS2143 provides for access to the proposed E1 performance monitor data link in the Sa bit positions.
The device allows access to the Sa bits either via a set of two internal registers (RNAF and TNAF) or via
two external pins (RLINK and TLINK).
On the receive side, the Sa bits are always reported in the internal RNAF register (see Section 11 for more
details). All five Sa bits are always output at the RLINK pin. See Section 13 for detailed timing. Via
RCR2, the user can control the RLCLK pin to pulse during any combination of Sa bits. This allows the
user to create a clock that can be used to capture the needed Sa bits.
On the transmit side, the individual Sa bits can be either sourced from the internal TNAF register
(TCR1.6=0) or from the external TLINK pin. Via TCR2, the DS2143 can be programmed to source any
combination of the additional bits from the TLINK pin. If the user wishes to pass the Sa bits through the
DS2143 without them being altered, then the device should be set up to source all 5 Sa bits via the
TLINK pin and the TLINK pin should be tied to the TSER pin. Please see the timing diagrams and the
transmit data flow diagram in Section 13 for examples.
7.0 SIGNALING OPERATION
The Channel Associated Signaling (CAS) bits embedded in the E1 stream can be extracted from the
receive stream and inserted into the transmit stream by the DS2143. Each of the 30 channels has 4
signaling bits (A/B/C/D) associated with it. The numbers in parenthesis () are the channel associated with
a particular signaling bit. The channel numbers have been assigned as described in the CCITT documents.
For example, channel 1 is associated with timeslot 1 and channel 30 is associated with timeslot 31. There
is a set of 16 registers for the receive side (RS1 to RS16) and 16 registers on the transmit side (TS1 to
TS16). The signaling registers are detailed below.
相关PDF资料
PDF描述
DS2148GN DATACOM, PCM TRANSCEIVER, BGA49
DS2148G DATACOM, PCM TRANSCEIVER, BGA49
DS2148TN DATACOM, PCM TRANSCEIVER, PQFP44
DS2148T DATACOM, PCM TRANSCEIVER, PQFP44
DS2151QNB DATACOM, FRAMER, PQCC44
相关代理商/技术参数
参数描述
DS2143N 功能描述:网络控制器与处理器 IC E1 Controller w/Elastic Store RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流(最大值):595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray
DS2143Q 功能描述:网络控制器与处理器 IC RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流(最大值):595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray
DS2143Q/T&R 制造商:Maxim Integrated Products 功能描述:IC CONTROLLER E1 5V LP 44-PLCC 制造商:Maxim Integrated Products 功能描述:Network Controller & Processor ICs E1 Controller w/Elastic Store
DS2143Q/T&R 功能描述:网络控制器与处理器 IC E1 Controller w/Elastic Store RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流(最大值):595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray
DS2143Q+ 功能描述:网络控制器与处理器 IC E1 Controller w/Elastic Store RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流(最大值):595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray