参数资料
| 型号： | DS26502DK |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 5/30页 |
| 文件大小： | 0K |
| 描述： | KIT DESIGN FOR DS26502 |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 设计资源： | DS26502DK Gerber Files |
| 标准包装： | 1 |
| 主要目的： | 电信，BITS 元件 |
| 已用 IC / 零件： | DS26502 |
| 已供物品： | 板，CD |
第1页第2页第3页第4页当前第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页
DS26502DK
BASIC OPERATION
This design kit relies upon several supporting files, which are available for downloading on our website at
www.maxim-ic.com/telecom . See the DS26502DK QuickView data sheet for these files.
Hardware Configuration
?
?
?
Supply 3.3V to the banana-plug receptacles marked GND and VCC_3.3V.
DIP switches are unused and can be in either the ON or OFF position with exception for the Flash
programming switch, which should be OFF.
From the Programs menu, launch the host application named ChipView.exe. Run the ChipView application. If
the default installation options were used, click the Start button on the Windows toolbar and select Programs →
ChipView → ChipView.
General
? Upon power-up the RLOS and RLOF LEDs (red) will be lit, the INT LED (red) will not be lit, and Status LED
(DS10 red/green bicolor) will be green.
Quick Setup (Register View)
?
?
?
?
The PC will load ChipView offering a choice among DEMO MODE, REGISTER VIEW, and TERMINAL MODE.
Select Register View.
The program will then request a definition file. Select DS26502DC_FPGA.def. Through the ‘links’ section, this
will also load DS26502.def.
The Register View Screen will appear, showing the register names, acronyms, and values for the DS26502.
Predefined Register settings for several functions are available as initialization files.
?
?
?
?
ini files are loaded by selecting the menu File → Reg ini File → Load ini File.
Load the ini file “CompositeClock.ini.”
Load the ini file “DS26502FPGA_2048Clks.ini,” which sets the DS26502 in Intel nonmultiplexed mode with
MCLK driven at 2.048MHz.
After loading the ini files the following may be observed:
? The RLOS and RLOF LEDs extinguishes upon external loopback.
? The part begins operating in composite clock mode.
Miscellaneous
?
?
?
Clock frequencies and certain pin bias levels are provided by a register-mapped FPGA.
The definition file for this FPGA is named DS26502DC_FPGA.def. The FPGA register definitions are
located on page 6. A drop-down menu on the top of the screen allows for switching between definition files.
All files referenced above are available for download as described in the section marked “BASIC
OPERATION.”
5 of 30
相关PDF资料 |
PDF描述 |
|---|---|
| DS26503DK | KIT DESIGN FOR DS26503 |
| DS26504DK | KIT DESIGN FOR DS26504 |
| DS26519DK | KIT DEMO FOR DS26519 |
| DS26521DK | KIT DESIGN FOR DS26521 |
| DS3106DK | KIT DEMO FOR DS3106 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DS26502L | 功能描述:计时器和支持产品 E1/T1/J1/64Kcc Bits Element RoHS:否 制造商:Micrel 类型:Standard 封装 / 箱体:SOT-23 内部定时器数量:1 电源电压-最大:18 V 电源电压-最小:2.7 V 最大功率耗散: 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装:Reel |
| DS26502L+ | 功能描述:计时器和支持产品 E1/T1/J1/64Kcc Bits Element RoHS:否 制造商:Micrel 类型:Standard 封装 / 箱体:SOT-23 内部定时器数量:1 电源电压-最大:18 V 电源电压-最小:2.7 V 最大功率耗散: 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装:Reel |
| DS26502LB1 | 功能描述:计时器和支持产品 E1/T1/J1/64Kcc Bits Element RoHS:否 制造商:Micrel 类型:Standard 封装 / 箱体:SOT-23 内部定时器数量:1 电源电压-最大:18 V 电源电压-最小:2.7 V 最大功率耗散: 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装:Reel |
| DS26502LN | 功能描述:计时器和支持产品 E1/T1/J1/64Kcc Bits Element RoHS:否 制造商:Micrel 类型:Standard 封装 / 箱体:SOT-23 内部定时器数量:1 电源电压-最大:18 V 电源电压-最小:2.7 V 最大功率耗散: 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装:Reel |
| DS26502LN+ | 功能描述:计时器和支持产品 E1/T1/J1/64Kcc Bits Element RoHS:否 制造商:Micrel 类型:Standard 封装 / 箱体:SOT-23 内部定时器数量:1 电源电压-最大:18 V 电源电压-最小:2.7 V 最大功率耗散: 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。