- 您现在的位置：买卖IC网 > PDF目录15550 > DS2715Z+T&R (Maxim Integrated Products)IC NIMH CHARGER 16-SOIC PDF资料下载
参数资料
| 型号： | DS2715Z+T&R |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 7/17页 |
| 文件大小： | 0K |
| 描述： | IC NIMH CHARGER 16-SOIC |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 2,500 |
| 功能： | 充电管理 |
| 电池化学： | 镍金属氢化物 |
| 电源电压： | 4.5 V ~ 16 V |
| 工作温度： | -20°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 16-SOIC（0.154"，3.90mm 宽） |
| 供应商设备封装： | 16-SOIC |
| 包装： | 带卷 (TR) |
DS2715: NiMH Battery Pack Charge Controller
DETAILED DESCRIPTION
Charge Cycle Overview
The DS2715 regulates the charge of up to 10 NiMH cells in a series configuration. With the mode select pin, the
DS2715 can be configured to regulate either as an error amplifier in linear mode or as a comparator in switched
mode. A charge cycle begins in one of two ways: with the application of power to the DS2715 while the cell pack is
already inserted, or with the detection of cell insertion after power-up.
After cell presence confirmation, PRECHARGE qualification occurs to prevent fast charging of deeply depleted
cells or charging under extreme temperature conditions. Pre-charging is performed at a reduced rate of
approximately ? the FAST-CHARGE current until each cell reaches 1V. The algorithm then proceeds to the FAST-
CHARGE phase. Fast charging continues as long as the cell pack temperature is less than 50 ? C based on the
THM voltage, and the cell voltage as measured at the V BATT pin in the middle of the resistor divider remains below
1.65V, indicating the cell pack is still present. Fast charging terminates normally by measuring the cell pack’s
thermal rate of change, dT/dt. When the cell pack’s thermal rate of change exceeds 0.5°C per minute, the DS2715
enters TOPOFF. The DS2715 has an internal charge timer as secondary overcharge protection if the charge is not
terminated properly by the dT/dt method. The charge termination timer duration is user selectable from 30 minutes
up to 6 hours by an external resistor on the R T pin.
Following a normally terminated or timed-out FAST-CHARGE phase, the DS2715 enters TOPOFF. It remains in
this state for one-half (one-quarter for DS2715B) of the period of the FAST-CHARGE timeout as selected by the
external resistor on R T . After the TOPOFF charge timer expires, the DONE phase continues indefinitely until the
cell pack is removed from the charger or DISCHARGE mode is entered. For the standard application circuit
configuration, when a load drawing at least Vdchg-set across the sense resistor is attached to the cell pack, the
DS2715 switches to DISCHARGE mode. All charge functions are disabled and the regulation FET is driven on to
allow the cell pack to discharge. Throughout the charging process, the open-drain LED1 output indicates the
charge status to the user.
Undervoltage Lockout (Reset)
The UVLO circuit serves as a power-up and brownout detector by monitoring V DD to prevent charging until V DD
rises above V UVLO , or when V DD drops below V UVLO - V UVLO-HYS . If UVLO is active, charging is prevented, the state
machine is forced to the RESET state, and all charge timers are reset. A 10 ? s deglitch circuit provides noise
immunity. Once V DD reaches an acceptable operating voltage, the DS2715 enters the PRESENCE state.
相关PDF资料 |
PDF描述 |
|---|---|
| H2AXT-10102-R4-ND | JUMPER-H1502TR/A2015R/X 2" |
| EBM36MMSN | CARDEDGE MALE 72POS .156 T/H AU |
| H2AXT-10102-N4-ND | JUMPER-H1502TR/A2015N/X 2" |
| H2AXT-10102-L4-ND | JUMPER-H1502TR/A2015L/X 2" |
| VI-BWB-EX-S | CONVERTER MOD DC/DC 95V 75W |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DS271AC-C10/0.03 | 制造商:ABB Control 功能描述:RCBO 10A 30MA TRIP 制造商:ABB Control 功能描述:Type C DIN rail mount RCBO,10KA 10A |
| DS271AC-C16/0.03 | 制造商:ABB Control 功能描述:RCBO 16A 30MA TRIP 制造商:ABB Control 功能描述:RCBO, 16A, 30MA TRIP; Voltage Rating V AC:230V; Current Rating:16A; No. of Poles:1; Series:DS271; Approval Category:BS EN 61009-2-2, EN 61009-1, IEC 61009; Breaking Capacity Current AC:10kA; External Depth:67.6mm; External Length / ;RoHS Compliant: Yes 制造商:ABB Control 功能描述:Type C DIN rail mount RCBO,10KA 16A |
| DS271AC-C20/0.03 | 制造商:ABB Control 功能描述:RCBO 20A 30MA TRIP 制造商:ABB Control 功能描述:RCBO, 20A, 30MA TRIP 制造商:ABB Control 功能描述:RCBO, 20A, 30MA TRIP; Voltage Rating V AC:230V; Current Rating:20A; No. of Poles:1; Series:DS271; Approval Category:BS EN 61009-2-2, EN 61009-1, IEC 61009; Breaking Capacity Current AC:10kA; External Depth:67.6mm; External Length / ;RoHS Compliant: Yes 制造商:ABB Control 功能描述:Type C DIN rail mount RCBO,10KA 20A |
| DS271AC-C25/0.03 | 制造商:ABB Control 功能描述:RCBO 25A 30MA TRIP 制造商:ABB Control 功能描述:Type C DIN rail mount RCBO,10KA 25A |
| DS271AC-C32/0.03 | 制造商:ABB Control 功能描述:RCBO 32A 30MA TRIP 制造商:ABB Control 功能描述:Type C DIN rail mount RCBO,10KA 32A |
发布紧急采购，3分钟左右您将得到回复。