- 您现在的位置：买卖IC网 > PDF目录1788 > DS2745U+T&R (Maxim Integrated Products)IC BATT MONITOR I2C 8-UMAX PDF资料下载
参数资料
| 型号： | DS2745U+T&R |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 4/15页 |
| 文件大小： | 0K |
| 描述： | IC BATT MONITOR I2C 8-UMAX |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 3,000 |
| 功能： | 燃料，电量检测计/监控器 |
| 电池化学： | 锂离子（Li-Ion）；镍金属氢化物（NiMH） |
| 电源电压： | 2.5 V ~ 5.5 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-TSSOP，8-MSOP（0.118"，3.00mm 宽） |
| 供应商设备封装： | 8-uMAX |
| 包装： | 带卷 (TR) |
DS2745 Low-Cost I 2 C Battery Monitor
Note 1:
Note 2:
Note 3:
Note 4:
Note 5:
Note 6:
Note 7:
Note 8:
Note 9:
Note 10:
Note 11:
Note 12:
All voltages are referenced to V SS .
Offset specified after auto-calibration cycle and Current Offset Bias register (COBR) set to 00h.
To properly enter sleep mode, SMOD=1, and the application should hold SDA and SCL low for longer
than the maximum t SLEEP .
NBEN = 0, Current Offset Bias Register (COBR) set to 00h, and Accumulation Bias Register (ABR)
set to 00h.
Parameters guaranteed by design.
Timing must be fast enough to prevent the DS2745 from entering sleep mode due to SDA,SCL low
for period >
t SLEEP .
f SCL must meet the minimum clock low time plus the rise/fall times.
The maximum t HD:DAT has only to be met if the device does not stretch the LOW period (t LOW ) of the
SCL
signal.
This device internally provides a hold time of at least 100 ns for the SDA signal (referred to the
VIHmin of
the SCL signal) to bridge the undefined region of the falling edge of SCL.
Filters on SDA and SCL suppress noise spikes at the input buffers and delay the sampling instant.
C B ? total capacitance of one bus line in pF.
The first voltage measurement after writing the ACR or after device POR is not valid.
Figure 1. I 2 C Bus Timing Diagram
4 of 15
相关PDF资料 |
PDF描述 |
|---|---|
| DS2746G+T&R | IC MON BATTERY 2-WIRE 10-TDFN |
| DS2756E-5+T&R | IC FUEL GAUGE BATT 3V 8-TSSOP |
| DS2760BE+T&R | IC BATT MON LI-ION HP 16-TSSOP |
| DS2761BE+T&R | IC MON BATT LI-ION HP 16-TSSOP |
| DS2762AE+025/T&R | IC MON BATT LI-ION HP 16-TSSOP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DS2746 | 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:Low-Cost 2-Wire Battery Monitor with Ratiometric A/D Inputs |
| DS2746_07 | 制造商:DALLAS 制造商全称:Dallas Semiconductor 功能描述:Low-Cost 2-Wire Battery Monitor with Ratiometric A/D Inputs |
| DS2746G+ | 功能描述:电池管理 2-Wire Bat Monitor w/Ratiometric A/D IN RoHS:否 制造商:Texas Instruments 电池类型:Li-Ion 输出电压:5 V 输出电流:4.5 A 工作电源电压:3.9 V to 17 V 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:VQFN-24 封装:Reel |
| DS2746G+T&R | 制造商:Maxim Integrated Products 功能描述:MONITOR 2.4V 10TDFN EP - Tape and Reel 制造商:Maxim Integrated Products 功能描述:IC MON BATTERY 2-WIRE 10-TDFN |
| DS2746G+T&R | 功能描述:电池管理 2-Wire Bat Monitor w/Ratiometric A/D IN RoHS:否 制造商:Texas Instruments 电池类型:Li-Ion 输出电压:5 V 输出电流:4.5 A 工作电源电压:3.9 V to 17 V 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:VQFN-24 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。