- 您现在的位置：买卖IC网 > PDF目录1788 > DS2746G+T&R (Maxim Integrated Products)IC MON BATTERY 2-WIRE 10-TDFN PDF资料下载
参数资料
| 型号： | DS2746G+T&R |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 15/17页 |
| 文件大小： | 0K |
| 描述： | IC MON BATTERY 2-WIRE 10-TDFN |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 2,500 |
| 功能： | 燃料，电量检测计/监控器 |
| 电池化学： | 锂离子（Li-Ion）；镍金属氢化物（NiMH） |
| 电源电压： | 2.5 V ~ 5.5 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 10-WFDFN 裸露焊盘 |
| 供应商设备封装： | 10-TDFN-EP（3x3） |
| 包装： | 带卷 (TR) |
DS2746 Low-Cost 2-Wire Battery Monitor
Table 5. 2-Wire Protocol Key
KEY
S
SAddr
FCmd
MAddr
Data
A
N
DESCRIPTION
START bit
Slave Address (7-bit)
Function Command byte
Memory Address byte
Data byte written by master
Acknowledge bit - Master
No Acknowledge - Master
KEY
Sr
W
R
P
Data
A
N
DESCRIPTION
Repeated START
R/W bit = 0
R/W bit = 1
STOP bit
Data byte returned by slave
Acknowledge bit - Slave
No Acknowledge - Slave
Basic Transaction Formats
Write:
S SAddr W A MAddr A Data0 A P
A write transaction transfers one or more data bytes to the DS2746. The data transfer begins at the memory
address supplied in the MAddr byte. Control of the SDA signal is retained by the master throughout the transaction,
except for the Acknowledge cycles.
Read:
S SAddr W A MAddr A Sr SAddr R A Data0 N P
Write Portion
Read Portion
A read transaction transfers one or more bytes from the DS2746. Read transactions are composed of two parts, a
write portion followed by a read portion, and is therefore inherently longer than a write transaction. The write portion
communicates the starting point for the read operation. The read portion follows immediately, beginning with a
REPEATED START, Slave Address with R/W set to a 1. Control of SDA is assumed by the DS2746 beginning with
the Slave Address Acknowledge cycle. Control of the SDA signal is retained by the DS2746 throughout the
transaction, except for the Acknowledge cycles. The master indicates the end of a read transaction by responding
to the last byte it requires with a No Acknowledge. This signals the DS2746 that control of SDA is to remain with
the master following the Acknowledge clock.
Write Data Protocol
The write data protocol is used to write to register and shadow RAM data to the DS2746 starting at memory
address MAddr. Data0 represents the data written to MAddr, Data1 represents the data written to MAddr + 1 and
DataN represents the last data byte, written to MAddr + N. The master indicates the end of a write transaction by
sending a STOP or REPEATED START after receiving the last acknowledge bit.
S SAddr W A MAddr A Data0 A Data1 A … DataN A P
The msb of the data to be stored at address MAddr can be written immediately after the MAddr byte is
acknowledged. Because the address is automatically incremented after the least significant bit (lsb) of each byte is
received by the DS2746, the msb of the data at address MAddr + 1 is can be written immediately after the
acknowledgement of the data at address MAddr. If the bus master continues an auto-incremented write transaction
beyond address 4Fh, the DS2746 ignores the data. Data is also ignored on writes to read-only addresses and
reserved addresses, locked EEPROM blocks as well as a write that auto increments to the Function Command
register (address FEh). Incomplete bytes and bytes that are Not Acknowledged by the DS2746 are not written to
memory. As noted in the Memory Section, writes to unlocked EEPROM blocks modify the shadow RAM only.
Read Data Protocol
The Read Data protocol is used to read register and shadow RAM data from the DS2746 starting at memory
address specified by MAddr. Data0 represents the data byte in memory location MAddr, Data1 represents the data
from MAddr + 1 and DataN represents the last byte read by the master.
S SAddr W A MAddr A Sr SAddr R A Data0 A Data1 A … DataN N P
15 of 17
相关PDF资料 |
PDF描述 |
|---|---|
| DS2756E-5+T&R | IC FUEL GAUGE BATT 3V 8-TSSOP |
| DS2760BE+T&R | IC BATT MON LI-ION HP 16-TSSOP |
| DS2761BE+T&R | IC MON BATT LI-ION HP 16-TSSOP |
| DS2762AE+025/T&R | IC MON BATT LI-ION HP 16-TSSOP |
| DS2764BE+025 | IC MON BATT LI-ION HP 16-TSSOP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DS2746K | 功能描述:电源管理IC开发工具 RoHS:否 制造商:Maxim Integrated 产品:Evaluation Kits 类型:Battery Management 工具用于评估:MAX17710GB 输入电压: 输出电压:1.8 V |
| DS275 | 功能描述:RS-232接口集成电路 RoHS:否 制造商:Exar 数据速率:52 Mbps 工作电源电压:5 V 电源电流:300 mA 工作温度范围:- 40 C to + 85 C 安装风格:SMD/SMT 封装 / 箱体:LQFP-100 封装: |
| DS275+ | 功能描述:RS-232接口集成电路 Line-Powered RS-232 Transceiver Chip RoHS:否 制造商:Exar 数据速率:52 Mbps 工作电源电压:5 V 电源电流:300 mA 工作温度范围:- 40 C to + 85 C 安装风格:SMD/SMT 封装 / 箱体:LQFP-100 封装: |
| DS2751 | 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:Multichemistry Fuel Garge |
| DS2751+ | 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:Multichemistry Fuel Garge |
发布紧急采购，3分钟左右您将得到回复。