- 您现在的位置：买卖IC网 > PDF目录17131 > DS2761BX-025/T&R (Maxim Integrated Products)IC MON BATT LI-ION HP FLIP-CHIP PDF资料下载
参数资料
| 型号： | DS2761BX-025/T&R |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 16/24页 |
| 文件大小： | 0K |
| 描述： | IC MON BATT LI-ION HP FLIP-CHIP |
| 标准包装： | 10,000 |
| 功能： | 电池监控器 |
| 电池化学： | 锂离子（Li-Ion） |
| 电源电压： | 2.5 V ~ 5.5 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 12-UFBGA，FCBGA |
| 供应商设备封装： | 12-覆晶 |
| 包装： | 带卷 (TR) |
DS2761
TRANSACTION SEQUENCE
The protocol for accessing the DS2761 through the 1-Wire port is as follows:
§
§
§
§
Initialization
Net Address Command
Function Command
Transaction/Data
The sections that follow describe each of these steps in detail.
All transactions of the 1-Wire bus begin with an initialization sequence consisting of a reset pulse
transmitted by the bus master followed by a presence pulse simultaneously transmitted by the DS2761
and any other slaves on the bus. The presence pulse tells the bus master that one or more devices are on
the bus and ready to operate. For more details, see the 1-Wire Signaling section.
NET ADDRESS COMMANDS
Once the bus master has detected the presence of one or more slaves, it can issue one of the net address
commands described in the following paragraphs. The name of each ROM command is followed by the
8-bit opcode for that command in square brackets. Figure 16 presents a transaction flowchart of the net
address commands.
Read Net Address [33h or 39h]. This command allows the bus master to read the DS2761’s 1-Wire net
address. This command can only be used if there is a single slave on the bus. If more than one slave is
present, a data collision occurs when all slaves try to transmit at the same time (open drain produces a
wired-AND result). The RNAOP bit in the status register selects the opcode for this command, with
RNAOP = 0 indicating 33h, and RNAOP = 1 indicating 39h.
Match Net Address [55h]. This command allows the bus master to specifically address one DS2761 on
the 1-Wire bus. Only the addressed DS2761 responds to any subsequent function command. All other
slave devices ignore the function command and wait for a reset pulse. This command can be used with
one or more slave devices on the bus.
Skip Net Address [CCh]. This command saves time when there is only one DS2761 on the bus by
allowing the bus master to issue a function command without specifying the address of the slave. If more
than one slave device is present on the bus, a subsequent function command can cause a data collision
when all slaves transmit data at the same time.
Search Net Address [F0h]. This command allows the bus master to use a process of elimination to
identify the 1-Wire net addresses of all slave devices on the bus. The search process involves the
repetition of a simple three-step routine: read a bit, read the complement of the bit, then write the desired
value of that bit. The bus master performs this simple three-step routine on each bit location of the net
address. After one complete pass through all 64 bits, the bus master knows the address of one device. The
remaining devices can then be identified on additional iterations of the process. See Chapter 5 of the Book
of DS19xx iButton ? Standards for a comprehensive discussion of a net address search, including an actual
example. (This publication can be found on the Maxim/Dallas Semiconductor website at www.maxim-
ic.com).
16 of 24
相关PDF资料 |
PDF描述 |
|---|---|
| F77737-000 | HX-SCE-1K-4.8-50-9 |
| GBC10DRYS-S734 | CONN EDGECARD 20POS DIP .100 SLD |
| EBM25DSEH-S243 | CONN EDGECARD 50POS .156 EYELET |
| MAX1737EEI | IC BATT CHRG CTRLR 4-LI+ 28-QSOP |
| RPS-1K-1-400/2.0-S1-4 | LABEL ID PRODUCT |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DS2761K | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Li+ Battery Monitor Evaluation Kit |
| DS2762 | 制造商:Maxim Integrated Products 功能描述:HIGH-PRECISION LI+ BATTERY MONITOR WITH ALERTS - Rail/Tube |
| DS2762A | 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:High-Precision Li+ Battery Monitor With Alerts |
| DS2762AE | 制造商:Maxim Integrated Products 功能描述:BAT MON/PROT VOV-4.275 TSSOP - Rail/Tube |
| DS2762AE/T&R | 功能描述:电池管理 RoHS:否 制造商:Texas Instruments 电池类型:Li-Ion 输出电压:5 V 输出电流:4.5 A 工作电源电压:3.9 V to 17 V 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:VQFN-24 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。