- 您现在的位置：买卖IC网 > PDF目录1788 > DS2762AE+025/T&R (Maxim Integrated Products)IC MON BATT LI-ION HP 16-TSSOP PDF资料下载
参数资料
| 型号： | DS2762AE+025/T&R |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 21/25页 |
| 文件大小： | 0K |
| 描述： | IC MON BATT LI-ION HP 16-TSSOP |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 1,000 |
| 功能： | 电池监控器 |
| 电池化学： | 锂离子（Li-Ion） |
| 电源电压： | 2.5 V ~ 5.5 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 16-TSSOP（0.173"，4.40mm 宽） |
| 供应商设备封装： | 16-TSSOP |
| 包装： | 带卷 (TR) |
DS2762 High-Precision Li+ Battery Monitor With Alerts
Write Data [6Ch, XX]. This command writes data to the DS2762 starting at memory address XX. The LSb of the
data to be stored at address XX can be written immediately after the MSb of address has been entered. Because
the address is automatically incremented after the MSb of each byte is written, the LSb to be stored at address XX
+ 1 can be written immediately after the MSb to be stored at address XX. If the bus master continues to write
beyond address FFh, the DS2762 ignores the data. Writes to read-only addresses, reserved addresses and locked
EEPROM blocks are ignored. Incomplete bytes are not written. Writes to unlocked EEPROM blocks are to shadow
RAM rather than EEPROM. See the Memory section for more details.
Copy Data [48h, XX]. This command copies the contents of shadow RAM to EEPROM for the 16-byte EEPROM
block containing address XX. Copy data commands that address locked blocks are ignored. While the copy data
command is executing, the EEC bit in the EEPROM register is set to 1 and writes to EEPROM addresses are
ignored. Reads and writes to non-EEPROM addresses can still occur while the copy is in progress. The copy data
command execution time, t EEC , is 2ms typical and starts after the last address bit is transmitted.
Recall Data [B8h, XX]. This command recalls the contents of the 16-byte EEPROM block containing address XX
to shadow RAM.
Lock [6Ah, XX]. This command locks (write-protects) the 16-byte block of EEPROM memory containing memory
address XX. The LOCK bit in the EEPROM register must be set to l before the lock command is executed. If the
LOCK bit is 0, the lock command has no effect. The lock command is permanent; a locked block can never be
written again.
Table 3. Function Commands
COMMAND
Read Data
Write Data
FUNCTION
Reads data from memory
starting at address XX
Writes data to memory
starting at address XX
COMMAND
PROTOCOL
69h, XX
6Ch, XX
BUS STATE AFTER
COMMAND PROTOCOL
Master Rx
Master Tx
BUS DATA
Up to 256 bytes of
data
Up to 256 bytes of
data
Copies shadow RAM data to
Copy Data
EEPROM block containing
48h, XX
Bus idle
None
address XX
Recalls EEPROM block
Recall Data
containing address XX to
B8h, XX
Bus idle
None
shadow RAM
Permanently locks the block
Lock
of EEPROM
6Ah, XX
Bus idle
None
containing address XX
21 of 25
相关PDF资料 |
PDF描述 |
|---|---|
| DS2764BE+025 | IC MON BATT LI-ION HP 16-TSSOP |
| DS2777G+T&R | IC FUEL GAUGE LI+ 2CELL 14-TDFN |
| DS2780G+T&R | IC FUEL GAUGE STAND ALONE 10TDFN |
| DS2781E+T&R | IC FUEL GAUGE BATT 8TSSOP |
| DS2782G-5+T&R | IC FUEL GAUGE STND-ALONE 10-TDFN |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DS2762AR | 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:High-Precision Li+ Battery Monitor With Alerts |
| DS2762AX/T&R | 功能描述:电池管理 High-Prec Li+ Bat Monitor w/Alerts RoHS:否 制造商:Texas Instruments 电池类型:Li-Ion 输出电压:5 V 输出电流:4.5 A 工作电源电压:3.9 V to 17 V 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:VQFN-24 封装:Reel |
| DS2762AX/TR | 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:High-Precision Li+ Battery Monitor With Alerts |
| DS2762AX-025/T&R | 制造商:Maxim Integrated Products 功能描述:IC BATTERY MONITOR LI+ FLIPCHIP |
| DS2762AX-025/T&R | 功能描述:电池管理 High-Prec Li+ Bat Monitor w/Alerts RoHS:否 制造商:Texas Instruments 电池类型:Li-Ion 输出电压:5 V 输出电流:4.5 A 工作电源电压:3.9 V to 17 V 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:VQFN-24 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。