参数资料
型号: DV42XXX
厂商: Microchip Technology
文件页数: 5/28页
文件大小: 0K
描述: KIT EVAL DIGITAL POT MCP42XXX
标准包装: 1
其它名称: Q1133465
2003 Microchip Technology Inc.
DS11195C-page 13
MCP41XXX/42XXX
4.0
APPLICATIONS INFORMATION
The MCP41XXX/42XXX devices are 256 position
single and dual digital potentiometers that can be used
in place of standard mechanical pots. Resistance val-
ues of 10 k
, 50 k and 100 k are available. As
shown in Figure 4-1, each potentiometer is made up of
a variable resistor and an 8-bit (256 position) data reg-
ister that determines the wiper position. There is a
nominal wiper resistance of 52
for the 10 k version,
125
for the 50 k and 100 k versions. For the dual
devices, the channel-to-channel matching variation is
less than 1%. The resistance between the wiper and
either of the resistor endpoints varies linearly according
to the value stored in the data register. Code 00h
effectively connects the wiper to the B terminal. At
power-up, all data registers will automatically be loaded
with the mid-scale value (80h). The serial interface pro-
vides the means for loading data into the shift register,
which is then transferred to the data registers. The
serial interface also provides the means to place indi-
vidual potentiometers in the shutdown mode for maxi-
mum power savings. The SHDN pin can also be used
to put all potentiometers in shutdown mode and the RS
pin is provided to set all potentiometers to mid-scale
(80h).
FIGURE 4-1:
Block diagram showing the MCP42XXX dual digital potentiometer. Data register 0 and
data register 1 are 8-bit registers allowing 256 positions for each wiper. Standard SPI pins are used with
the addition of the Shutdown (SHDN) and Reset (RS) pins. As shown, reset affects the data register and
wipers, bringing them to mid-scale. Shutdown disconnects the A terminal and connects the wiper to B,
without changing the state of the data registers.
When laying out the circuit for your digital potentiome-
ter, bypass capacitors should be used. These capaci-
tors should be placed as close as possible to the device
pin. A bypass capacitor value of 0.1 F is recom-
mended. Digital and analog traces should be separated
as much as possible on the board, with no traces run-
ning underneath the device or the bypass capacitor.
Extra precautions should be taken to keep traces with
high-frequency signals (such as clock lines) as far as
possible from analog traces. Use of an analog ground
plane is recommended in order to keep the ground
potential the same for all devices on the board.
RDAC1
SCK
SO
SI
Decode
Logic
16-bit Shift Register
PA0
PB0
PW0
RDAC2
Data Register 1
CS
RS
SHDN
D7
D0
Data Register 0
D7
D0
D7
D0
PA1
PB1
PW1
VDD
A
B
W
VDD
MCP4XXXX
C
To Application
Circuit
0.1 uF
Data Lines
相关PDF资料
PDF描述
M3TKK-4020K IDC CABLE - MSD40K/MC40F/MPK40K
A3RRB-4018G IDC CABLE - APR40B/AE40G/APR40B
A3CKB-6436G IDC CABLE - AKC64B/AE64G/APK64B
M3RRK-3418J IDC CABLE - MPR34K/MC34G/MPR34K
M3GGK-3418J IDC CABLE - MCS34K/MC34G/MCS34K
相关代理商/技术参数
参数描述
DV4X12.5SR4A-SA1 制造商:Hikvision USA 功能描述:12.5~50mm Auto Iris Varifocal 5MP Lens 制造商:HIKVISION 功能描述:VARIFOCAL 1/1.8 LENS 5MP LEF1.6 12.5-50MM AUTO IRIS
DV50 功能描述:数字万用表 TELESCOPING AC VOLTAGE DETECTOR RoHS:否 制造商:Tektronix 产品:Multimeters 类型:Bench 准确性:0.04 % 电压范围:2 V to 2 kV 电阻范围: 电容范围: 显示计数: 频率:10 Hz to 45 Hz, 850 Hz to 1 MHz 测距: 真均方根值: 数据保持:
DV50K3225T 制造商:SEI Stackpole Electronics Inc 功能描述:- Tape and Reel 制造商:SEI Stackpole Electronics Inc 功能描述:Var MOV 50VAC/65VDC 400A 82V 3225 SMD T/R
DV50K4032T 制造商:SEI Stackpole Electronics Inc 功能描述:VAR 50VAC 65VDC 1200A 82V 4032 SMD - Tape and Reel 制造商:SEI Stackpole Electronics Inc 功能描述:Var MOV 50VAC/65VDC 1200A 82V 4032 SMD T/R
DV51-322-037 制造商:Moeller Electric Corporation 功能描述:FREQUENCY CONVERTER DV51(0.25 KW-230 V)