- 您现在的位置：买卖IC网 > Datasheet目录61 > EE-SX3239-P2 (Omron Electronics Inc-EMC Div)PHOTO MICRO SENSOR TRANSMISSIVE Datasheet资料下载
参数资料
| 型号： | EE-SX3239-P2 |
| 厂商： | Omron Electronics Inc-EMC Div |
| 文件页数： | 2/4页 |
| 文件大小： | 149K |
| 描述： | PHOTO MICRO SENSOR TRANSMISSIVE |
| 标准包装： | 100 |
| 检测距离： | 0.197"（5mm） |
| 检测方法： | 可传导的 |
| 安装类型： | 卡入式 |
| 电流 - 电源： | 16mA |
| 电源电压： | 4.75 V ~ 5.25 V |
| 封装/外壳： | 模块 |
| 其它名称： | EE-SX3239-P2-ND EE-SX3239P2 EESX3239P2 OR1069 Q1706256 |
208
Photomicrosensor (Transmissive) EE-SX3239-P2
?SPAN class="pst EE-SX3239-P2_2584107_4"> Engineering Data
?SPAN class="pst EE-SX3239-P2_2584107_4"> Recommended Mounting Holes
" When mounting the Photomicrosensor to a panel with a hole opened by pressing, make sure that the hole has no burrs. The mounting strength
of the Photomicrosensor will decrease if the hole has burrs.
" When mounting the Photomicrosensor to a panel with a hole opened by pressing, be sure to mount the Photomicrosensor on the pressing side
of the panel.
" The mounting strength of the Photomicrosensor will increase if the Photomicrosensor is mounted to a panel with a hole that is only a little larger
than the size of the Photomicrosensor, in which case, however, it will be difficult to mount the Photomicrosensor to the panel. The mounting
strength of the Photomicrosensor will decrease if the Photomicrosensor is mounted to a panel with a hole that is comparatively larger than the
size of the Photomicrosensor, in which case, however, it will be easy to mount the Photomicrosensor to the panel. When mounting the Photomi-
crosensor to a panel, open an appropriate hole for the Photomicrosensor according to the application.
" After mounting the Photomicrosensor to any panel, make sure that the Photomicrosensor does not wobble.
" When mounting the Photomicrosensor to a molding with a hole, make sure that the edges of the hole are sharp enough, otherwise the Photomi-
crosensor may fall out.
Output Allowable Dissipation vs.
Ambient Temperature Characteristics
Sensing Position Characteristics
(Typical)
Distance d (mm)
Center of optical axis
Ambient temperature Ta (癈)
d
1
= 0?.3 mm
V
CC
= 5 V
Ta = 25癈
R
L
= 47 k?
Sensing Position Characteristics
(Typical)
Distance d (mm)
ON
3
2
1
0
1
2
3
OFF
d2
d
V
CC
= 5 V
Ta = 25癈
R
L
= 47 k?
d
2
= 0?.1 mm
相关PDF资料 |
PDF描述 |
|---|---|
| EE-SX384 | OPTO SENSOR 3.5MM DARK-ON TRANS |
| EE-SX4009-P10 | OPTO SENSOR SLOT TYPE 5MM |
| GP1A057RBKLF | PHOTOINTERRUPTER OPIC SLOT |
| GP1A073LCS0F | PHOTOINTER OPIC SLOT 5MM W/CONN |
| GP1A50HRJ00F | PHOTOINTER OPIC SLOT 3.0MM PCB |
相关代理商/技术参数 |
参数描述 |
|---|---|
| EE-SX328 | 制造商:OMRON Electronic Components LLC 功能描述: |
| EESX330 | 制造商:OMRON AUTOMATION AND SAFETY 功能描述:PHOTOINTERUPTER TRANSMISSIVE 制造商:OMRON Industrial Automation 功能描述:PHOTOINTERUPTER TRANSMISSIVE |
| EE-SX330 | 功能描述:PHOTOINTERUPTER TRANSMISSIVE RoHS:是 类别:传感器，转换器 >> 光学 - 光断续器 - 槽型 - 逻辑输出 系列:- 产品变化通告:Product Discontinuation 03/Dec/2009 标准包装:50 系列:OPTOLOGIC® 检测距离:0.197"（5mm） 检测方法:可传导的 输出配置:NPN - 开路集电极，缓冲器 安装类型:通孔 电流 - 电源:5mA 电源电压:4.5 V ~ 16 V 响应时间:70ns 封装/外壳:PCB 安装 |
| EESX384 | 制造商:Omron Electronic Components LLC 功能描述:NON-AMPLIFIED SENSOR - Trays 制造商:Omron Electronic Components LLC 功能描述:OPTO SENSOR 3.5MM DARK-ON TRANS 制造商:Omron Electronic Components LLC 功能描述:Photointerrupter Transmissive 3.5mm Photologic, Open Collector 5-Pin |
| EE-SX384 | 功能描述:光学开关（透射型，光电IC输出） QPAQUE Dark-ON RoHS:否 制造商:Optek 输出设备:Totem Pole, Buffer 槽宽:3.18 mm 光圈宽度:1.27 mm 正向电流:40 mA 最大工作温度:+ 70 C 最小工作温度:- 40 C 封装: |
发布紧急采购，3分钟左右您将得到回复。