参数资料
| 型号： | EL5129IREZ |
| 厂商： | Intersil |
| 文件页数： | 3/13页 |
| 文件大小： | 0K |
| 描述： | IC BUFFER GAMMA 6-CHAN 20HTSSOP |
| 标准包装： | 74 |
| 应用： | TFT-LCD 面板：伽玛缓冲器，VCOM 驱动器 |
| 输出类型： | 满摆幅 |
| 电路数： | 6 |
| -3db带宽： | 10MHz |
| 转换速率： | 9 V/µs |
| 电流 - 电源： | 3.5mA |
| 电流 - 输出 / 通道： | 120mA |
| 电压 - 电源，单路/双路(±)： | 4.5 V ~ 16.5 V，±2.25 V ~ 8.25 V |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 20-TSSOP（0.173"，4.40mm 宽）裸露焊盘 |
| 供应商设备封装： | 20-TSSOP-EP |
| 包装： | 管件 |
11
FN7430.1
May 13, 2005
Power Supply Bypassing and Printed Circuit
Board Layout
As with any high frequency device, good printed circuit
board layout is necessary for optimum performance. Ground
plane construction is highly recommended, lead lengths
should be as short as possible, and the power supply pins
must be well bypassed to reduce the risk of oscillation. For
normal single supply operation, where the VS- pin is
connected to ground, one 0.1F ceramic capacitor should be
placed from the VS+ pin to ground. A 4.7F tantalum
capacitor should then be connected from the VS+ pin to
ground. One 4.7F capacitor may be used for multiple
devices. This same capacitor combination should be placed
at each supply pin to ground if split supplies are to be used.
Important Note: The metal plane used for heat sinking of
the device is electrically connected to the negative
supply potential (VS-). If VS- is tied to ground, the
thermal pad can be connected to ground. Otherwise, the
thermal pad must be isolated from any other power
planes.
EL5129, EL5329
相关PDF资料 |
PDF描述 |
|---|---|
| EL5228IL-T7A | IC AMP VCOM DUAL BUFF 10-DFN |
| EL5623IRZ | IC BUFFER MULTI CHANNEL 16-TSSOP |
| EL5624AIREZ | IC BUFFER 6-CHANNEL 20-HTSSOP |
| EL5625ILZ | IC BUFFER 18XGAMMA PROG 38-QFN |
| EL5824IREZ | IC BUFFER 10-GAMMA 28-HTSSOP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| EL5129IREZ-T13 | 功能描述:IC BUFFER MULTI-CHANNEL 20HTSSOP RoHS:是 类别:集成电路 (IC) >> 线性 - 放大器 - 视频放大器和频缓冲器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:50 系列:- 应用:TFT-LCD 面板：VCOM 驱动器 输出类型:满摆幅 电路数:1 -3db带宽:35MHz 转换速率:40 V/µs 电流 - 电源:3.7mA 电流 - 输出 / 通道:1.3A 电压 - 电源，单路/双路(±):9 V ~ 20 V，±4.5 V ~ 10 V 安装类型:表面贴装 封装/外壳:8-TSSOP，8-MSOP（0.118"，3.00mm 宽）裸露焊盘 供应商设备封装:8-uMax-EP 包装:管件 |
| EL5129IREZ-T7 | 功能描述:IC BUFFER MULTI-CHANNEL 20HTSSOP RoHS:是 类别:集成电路 (IC) >> 线性 - 放大器 - 视频放大器和频缓冲器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:50 系列:- 应用:TFT-LCD 面板：VCOM 驱动器 输出类型:满摆幅 电路数:1 -3db带宽:35MHz 转换速率:40 V/µs 电流 - 电源:3.7mA 电流 - 输出 / 通道:1.3A 电压 - 电源，单路/双路(±):9 V ~ 20 V，±4.5 V ~ 10 V 安装类型:表面贴装 封装/外壳:8-TSSOP，8-MSOP（0.118"，3.00mm 宽）裸露焊盘 供应商设备封装:8-uMax-EP 包装:管件 |
| EL5129IRZ | 制造商:INTERSIL 制造商全称:Intersil Corporation 功能描述:Multi-Channel Buffers |
| EL5129IRZ-T13 | 制造商:INTERSIL 制造商全称:Intersil Corporation 功能描述:Multi-Channel Buffers |
| EL5129IRZ-T7 | 制造商:INTERSIL 制造商全称:Intersil Corporation 功能描述:Multi-Channel Buffers |
发布紧急采购，3分钟左右您将得到回复。