- 您现在的位置：买卖IC网 > PDF目录17101 > EVAL-AD1955EBZ (Analog Devices Inc)BOARD EVAL FOR AD1955 PDF资料下载
参数资料
| 型号： | EVAL-AD1955EBZ |
| 厂商： | Analog Devices Inc |
| 文件页数： | 4/24页 |
| 文件大小： | 0K |
| 描述： | BOARD EVAL FOR AD1955 |
| 产品培训模块： | DAC Architectures |
| 标准包装： | 1 |
| DAC 的数量： | 2 |
| 位数： | 24 |
| 采样率（每秒）： | 192k |
| 数据接口： | 串行 |
| DAC 型： | 电流 |
| 工作温度： | -40°C ~ 85°C |
| 已供物品： | 板 |
| 已用 IC / 零件： | AD1955 |
| 相关产品： | AD1955ARSZRL-ND - IC DAC AUDIO 16-24BIT 28SSOP AD1955ARSZ-ND - IC DAC AUDIO MULTIBIT 28-SSOP |
REV. 0
–12–
AD1955
TPC 31. FFT Plot, 64
fS DSD, SR = 44.1 kHz,
0 dBFS @ 10 kHz
TPC 32. Wideband FFT Plot, 64
fS DSD,
SR = 44.1 kHz, 0 dBFS @ 10 kHz
(continued from page 1)
sample rate converters. The AD1955 can be configured in left-
justified, I
2S, right-justified, or DSP serial port compatible
modes. It can support MSB first, twos complement format, 16,
18, 20, and 24 bits in all standard PCM modes. The AD1955
also has an interface for SACD playback and an external digital
filter interface for use with an external digital interpolation filter
or HDCD decoder. The AD1955 uses a 5 V power supply. It is
fabricated on a single monolithic integrated circuit and is housed
in a 28-lead SSOP package for operation over the temperature
range –40
°C to +85°C.
OPERATING FEATURES
Serial Data Input Port
The AD1955’s flexible serial data input port accepts standard
PCM audio data and external digital filter output data in twos
complement, MSB-first format in PCM/External Digital Filter
Mode, and a dedicated SACD serial port accepts DSD bit stream
data in SACD Mode. If the PCM Mode is selected by Control
Register 0 Bits 12 and 13, the left channel data field always pre-
cedes the right channel data field. The serial data format and
word length in PCM Mode are set by the mode select bits (Bits 4
and 5 and Bits 2 and 3, respectively) in the SPI control register.
In all data formats except for the Right-Justified Mode, the
serial port will accept an arbitrary number of bits up to a limit of
24 (extra bits will not cause an error, but they will be truncated
internally). In Right-Justified Mode, Control Register 0, Bits 2
and 3 are used to set the word length to 16, 18, 20, or 24 bits.
The default on power up is 24-bit, I
2S.
In the External Digital Filter Mode, selected by Control Regis-
ter 0 Bits 12 and 13, Bits 2 and 3 are used to set the word length
to 16, 18, 20, or 24 bits and the format is set with Bits 4 and 5.
For a burst-mode clock, the format should be set to left-justified.
DSP Mode is not used. The LRCLK is always falling-edge active.
The default on power-up is 24-bit mode in PCM and External
Digital Filter Mode.
In SACD Mode, selected by Control Register 0 Bits 12 and 13,
the SACD port will accept a DSD bit stream.
When the SPI Control Port is not being used, the SPI pins (24,
25, and 26) should be tied to DGND or DVDD.
Serial Data Format in PCM Mode
The supported formats are shown in Figure 1. For detailed
timing, see Figure 2.
In Left-Justified Mode, LRCLK is high for the left channel and
low for the right channel. Data should be valid on the rising
edge of BCLK. The MSB is left-justified to an LRCLK transi-
tion, with no MSB delay.
In I
2S Mode, LRCLK is low for the left channel and high for
the right channel. Data should be valid on the rising edge of
BCLK. The MSB is left-justified to an LRCLK transition but
with a single BCLK period delay.
In DSP serial port mode, LRCLK must pulse high for at least
one bit clock period before the MSB of the left channel is valid,
and LRCLK must pulse high again for at least one bit clock
period before the MSB of the right channel is valid. Data should
be valid on the falling edge of BCLK. The DSP serial port mode
can be used with any word length up to 24 bits.
In this mode, it is the responsibility of the DSP to ensure that the
left data is transmitted with the first LRCLK pulse after RESET,
and that synchronism is maintained from that point forward.
In Right-Justified Mode (16 bits shown), LRCLK is high for the
left channel and low for the right channel. Data should be valid
on the rising edge of BCLK.
In normal operation, there are 64 bit clocks per frame (or 32 per
half-frame). When the SPI word length control bits (Bits 2 and
3 in Control Register 0) are set to 24 bits (0:0), the serial port
will begin to accept data starting at the eighth bit clock pulse
after the LRCLK transition. When the word length control bits
are set to 20-bit mode, data is accepted starting at the 12
th bit
clock position. In 18-bit mode, data is accepted starting at the
14
th bit clock position. In 16-bit mode, data is accepted starting
at the 16th bit clock position.
Note that the AD1955 is capable of a 32
fS BCLK frequency
“packed mode” where the MSB is left-justified to an LRCLK
transition, and the LSB is right-justified to the next LRCLK
transition. LRCLK is high for the left channel, and low for the
right channel. Data is valid on the rising edge of BCLK. Packed
mode can be used when the AD1955 is programmed in Left-
Justified Mode.
相关PDF资料 |
PDF描述 |
|---|---|
| TOOLSTICK381DC | TOOLSTICK DAUGHTER CARD |
| EBM28DRTN-S13 | CONN EDGECARD 56POS .156 EXTEND |
| EBM28DRTH-S13 | CONN EDGECARD 56POS .156 EXTEND |
| ECC15DRTF | CONN EDGECARD 30POS DIP .100 SLD |
| STD24W-G | WIRE & CABLE MARKERS |
相关代理商/技术参数 |
参数描述 |
|---|---|
| EVAL-AD1955EBZ | 制造商:Analog Devices 功能描述:EVAL BOARD, AD1955 STEREO DIGITAL AUDIO |
| EVAL-AD1958EB | 制造商:AD 制造商全称:Analog Devices 功能描述:PLL/Multibit DAC |
| EVAL-AD1959EB | 制造商:AD 制造商全称:Analog Devices 功能描述:PLL/Multibit DAC |
| EVAL-AD1970EB | 制造商:Analog Devices 功能描述:EVAL BD BTSC ENCODER W INTEGRATED CODEC - Bulk |
| EVAL-AD1974AZ | 功能描述:BOARD EVAL FOR AD1974 RoHS:是 类别:编程器，开发系统 >> 评估板 - 模数转换器 (ADC) 系列:- 产品培训模块:Obsolescence Mitigation Program 标准包装:1 系列:- ADC 的数量:1 位数:12 采样率（每秒）:94.4k 数据接口:USB 输入范围:±VREF/2 在以下条件下的电源（标准）:- 工作温度:-40°C ~ 85°C 已用 IC / 零件:MAX11645 已供物品:板，软件 |
发布紧急采购，3分钟左右您将得到回复。