参数资料
| 型号： | EVAL-CN0229-SDPZ |
| 厂商： | Analog Devices Inc |
| 文件页数： | 6/6页 |
| 文件大小： | 0K |
| 描述： | EVAL-CN0229-SDPZ |
| 设计资源： | EVAL-CN0229-SDPZ Pads Layout EVAL-CN0229-SDPZ Schematic |
| 标准包装： | 1 |
| 系列： | * |
CN-0229
Test
After setting up the test equipment, connect the VOUT pin of
CN3 or the IOUT pin of CN4 to the input of the Agilent 34401A.
Ensure that the cable connection on the front panel of Agilent
34401A is correct, depending on the different input signal type
(current or voltage). Testing the INL, DNL, and output error takes a
considerable amount of time because all the AD5686R 16-bit
DAC levels must be set and measured by the Agilent 34401A.
The software provided on the CD allows the DAC codes to be
set by the PC. An automatic test program is necessary to step
through the codes and analyze the data. This is not provided on
the CD but must be implemented by the customer to correspond to
the requirements of the particular multimeter used in the test setup.
In the test configuration shown in Figure 5, the GPIB output of
the Agilent 34401A multimeter interfaces to a second USB port
on the PC using the National Instruments GPIB to USB-B interface
and cable. This allows the multimeter readings corresponding
to each code to be loaded into an Excel spreadsheet in the PC. The
data is then be analyzed for INL, DNL, and output error using
industry-standard definitions.
For more details on the definitions and how to calculate the INL,
DNL, and output error from the measured data, see the
Terminology section of the AD5686R data sheet and the Data
LEARN MORE
CN-0229 Design Support Package:
Circuit Note
Data Sheets and Evaluation Boards
REVISION HISTORY
4/12—Rev. 0: Initial Version
(Continued from first page) Circuits from the Lab circuits are intended only for use with Analog Devices products and are the intellectual property of Analog Devices or its licensors. While you
may use the Circuits from the Lab circuits in the design of your product, no other license is granted by implication or otherwise under any patents or other intellectual property by
application or use of the Circuits from the Lab circuits. Information furnished by Analog Devices is believed to be accurate and reliable. However, Circuits from the Lab circuits are supplied
"as is" and without warranties of any kind, express, implied, or statutory including, but not limited to, any implied warranty of merchantability, noninfringement or fitness for a particular
purpose and no responsibility is assumed by Analog Devices for their use, nor for any infringements of patents or other rights of third parties that may result from their use. Analog Devices
reserves the right to change any Circuits from the Lab circuits at any time without notice but is under no obligation to do so.
?2012 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
CN10099-0-4/12(0)
Rev. 0 | Page 6 of 6
相关PDF资料 |
PDF描述 |
|---|---|
| EVAL-CN0235-SDPZ | BOARD EVAL LITHIUM ION MONITOR |
| EVAL-CN0253-SDPZ | EVAL MONITOR CIRCUIT FRONT END |
| EVAL-CN0271-SDPZ | EVAL SYSTEM FOR CN0271 |
| EVAL-INAMP-82RMZ | BOARD EVAL FOR AD8220 MSOP |
| EVAL-PRAOPAMP-1KSZ | ADAPTOR BOARD SINGLE AMP SC70-5 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| EVAL-CN0234-SDPZ | 功能描述:多功能传感器开发工具 ELECTROCHM SNSOR BASED TXIC GAS DETECTOR RoHS:否 制造商:Texas Instruments 工具用于评估:LMP91200 接口类型:SPI 工作电压:1.8 V to 5.5 V 最大工作温度: |
| EVAL-CN0235-SDPZ | 功能描述:BOARD EVAL LITHIUM ION MONITOR RoHS:是 类别:编程器，开发系统 >> 评估演示板和套件 系列:Circuits from the Lab™ 标准包装:1 系列:PSoC® 主要目的:电源管理，热管理 嵌入式:- 已用 IC / 零件:- 主要属性:- 次要属性:- 已供物品:板，CD，电源 |
| EVAL-CN0240-SDPZ | 功能描述:BOARD EVAL ISOLATED CURR SENSOR RoHS:是 类别:编程器，开发系统 >> 评估板 - 传感器 系列:Circuits from the Lab™ 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:1 系列:- |
| EVAL-CN0241-SDPZ | 功能描述:BOARD EVAL FOR CN0241-SDPZ RoHS:是 类别:编程器，开发系统 >> 评估板 - 传感器 系列:Circuits from the Lab™ 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:1 系列:- |
| EVAL-CN0243-EB1Z | 功能描述:RF EVAL SIGNAL CHAIN DAC IQ MOD RoHS:是 类别:RF/IF 和 RFID >> RF 评估和开发套件，板 系列:- 标准包装:1 系列:- 类型:GPS 接收器 频率:1575MHz 适用于相关产品:- 已供物品:模块 其它名称:SER3796 |
发布紧急采购，3分钟左右您将得到回复。