- 您现在的位置：买卖IC网 > PDF目录68994 > FC250B1 (LINEAGE POWER LLC) 1-OUTPUT 250 W DC-DC REG PWR SUPPLY MODULE PDF资料下载
参数资料
| 型号： | FC250B1 |
| 厂商： | LINEAGE POWER LLC |
| 元件分类： | 电源模块 |
| 英文描述： | 1-OUTPUT 250 W DC-DC REG PWR SUPPLY MODULE |
| 封装： | MODULE-14 |
| 文件页数： | 2/20页 |
| 文件大小： | 752K |
| 代理商： | FC250B1 |
10
Lineage Power
Data Sheet
April 2008
18 Vdc to 36 Vdc Input, 12 Vdc Output; 250 W
FC250B1 Power Module: dc-dc Converter;
Feature Descriptions (continued)
Output Voltage Set-Point Adjustment
(Trim) (continued)
With an external resistor connected between the TRIM
and SENSE(+) pins (Radj-up), the output voltage set
The following equation determines the required exter-
nal-resistor value to obtain a percentage output voltage
change of
Δ%.
The test results for this configuration are displayed in
Figure 16.
The voltage between the VO(+) and VO(–) terminals
must not exceed the minimum value of the output over-
voltage protection as indicated in the Feature Specifi-
cations table. This limit includes any increase in
voltage due to remote-sense compensation and output
voltage set-point adjustment (trim). See Figure 12.
Although the output voltage can be increased by both
the remote sense and by the trim, the maximum
increase for the output voltage is not the sum of both.
The maximum increase is the larger of either the
remote sense or the trim. Consult the factory if you
need to increase the output voltage more than the
above limitation.
The amount of power delivered by the module is
defined as the voltage at the output terminals multiplied
by the output current. When using remote sense and
trim, the output voltage of the module can be
increased, which at the same output current would
increase the power output of the module. Care should
be taken to ensure that the maximum output power of
the module remains at or below the maximum rated
power.
8-748 (C).b
Figure 13.Circuit Configuration to Decrease
Output Voltage
8-1959 (C)
Figure 14.Resistor Selection for Decreased Output
Voltage
8-715 (C).b
Figure 15.circuit Configuration to Increase
Output Voltage
8-1960 (C)
Figure 16.Resistor Selection for Increased Output
Voltage
Radj-up
(VO, nom 1
Δ%
100
---------
+
– 1.225)
1.225
Δ%
()
------------------------------------------------------------------205 – 2.225
k
Ω
=
VI(+)
VI(–)
ON/OFF
CASE
VO(+)
VO(–)
SENSE(+)
TRIM
SENSE(–)
Radj-down
RLOAD
0
102030
40
1k
PERCENT CHANGE IN OUTPUT VOLTAGE (
Δ%)
ADJUSTMENT
RESIST
OR
V
ALUE
(
Ω
)
100
10
1
VI (+)
VI (–)
ON/OFF
CASE
VO (+)
VO(-)
SENSE(+)
TRIM
SENSE(–)
Radj-up
RLOAD
02
4
6
8
10k
PERCENT CHANGE IN OUTPUT VOLTAGE (
Δ%)
ADJUSTMENT
RESIST
OR
V
ALUE
(
Ω
)
1k
100
10
相关PDF资料 |
PDF描述 |
|---|---|
| FC250F1 | 1-OUTPUT 165 W DC-DC REG PWR SUPPLY MODULE |
| FC250R1 | 1-OUTPUT 250 W DC-DC REG PWR SUPPLY MODULE |
| FC250R1 | 1-OUTPUT 252 W DC-DC REG PWR SUPPLY MODULE |
| FC250S6R51 | 1-OUTPUT 250.25 W DC-DC REG PWR SUPPLY MODULE |
| FC400R1-29 | DC-DC REG PWR SUPPLY MODULE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| FC250C | 制造商:未知厂家 制造商全称:未知厂家 功能描述:DC-to-DC Voltage Converter |
| FC250C1 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:DC-to-DC Voltage Converter |
| FC250F | 制造商:未知厂家 制造商全称:未知厂家 功能描述:DC-to-DC Voltage Converter |
| FC250F1 | 功能描述:CONVERTER DC/DC 3.3V 165W OUT RoHS:否 类别:电源 - 板载 >> DC DC Converters 系列:FC250 设计资源:VI-200, VI-J00 Design Guide, Appl Manual 标准包装:1 系列:* 类型:隔离 输出数:1 电压 - 输入（最小）:42V 电压 - 输入（最大）:60V Voltage - Output 1:15V Voltage - Output 2:- Voltage - Output 3:- 电流 - 输出（最大）:* 电源（瓦） - 制造商系列:150W 电压 - 隔离:* 特点:* 安装类型:通孔 封装/外壳:9-SlimMod 尺寸/尺寸:4.60" L x 1.80" W x 0.52" H（116.8mm x 45.7mm x 13.2mm） 包装:散装 工作温度:-55°C ~ 85°C 效率:* 电源（瓦特）- 最大:* |
| FC250H1 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:DC-to-DC Voltage Converter |
发布紧急采购，3分钟左右您将得到回复。