- 您现在的位置：买卖IC网 > PDF目录1922 > FT232BL-REEL (FTDI, Future Technology Devices International Ltd)IC USB FS SERIAL UART 32-LQFP PDF资料下载
参数资料
| 型号： | FT232BL-REEL |
| 厂商： | FTDI, Future Technology Devices International Ltd |
| 文件页数： | 11/34页 |
| 文件大小： | 0K |
| 描述： | IC USB FS SERIAL UART 32-LQFP |
| 产品培训模块： | USB Introduction |
| 标准包装： | 1 |
| 系列： | USBmadeEZ-UART |
| 通道数： | 1，UART |
| FIFO's： | 256 字节 |
| 规程： | RS232，RS422，RS485 |
| 电源电压： | 4.35V ~ 5.25V |
| 带自动流量控制功能： | 是 |
| 带调制解调器控制功能： | 是 |
| 带CMOS： | 是 |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 32-LQFP |
| 供应商设备封装： | 32-LQFP |
| 包装： | 标准包装 |
| 产品目录页面： | 634 (CN2011-ZH PDF) |
| 其它名称： | 768-1009-6 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页当前第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页
Copyright 2011 Future Technology Devices International Limited
19
Document No.: FT_000329
FT232BL
/BQ USB UART IC Datasheet Version 2.2
Clearance No.: FTDI#
171
6.3 Interfacing to 3.3V Logic
6.3.1 Bus Powered Circuit with 3.3V logic drive / supply voltage
Figure 6.3 Bus Powered Circuit with 3.3V logic drive / supply voltage
Figure 6.3 shows how to configure the FT232B to interface with a 3.3V logic device. In this example, a
discrete 3.3V regulator is used to supply the 3.3V logic from the USB supply. VCCIO is connected to the
output of the 3.3V regulator, which in turn will cause the UART interface IO pins to drive out at 3.3V
level. For USB bus powered circuits some considerations have to be taken into account when selecting
the regulator:
a) The regulator must be capable of sustaining its output voltage with an input voltage of 4.35 volts.
A Low Drop Out (LDO) regulator must be selected.
b) The quiescent current of the regulator must be low in order to meet the USB suspend total
current requirement of <= 500uA during USB suspend.
An example of a regulator family that meets these requirements is the MicroChip MCP1700 Series. These
devices can supply up to 250mA current and have a quiescent current of under 1uA.
In some cases, where only a small amount of current is required (< 5mA) , it may be possible to use the
in-built regulator of the FT232B to supply the 3.3v without any other components being required. In this
case, connect VCCIO to the 3v3OUT pin of the FT232B.
Note: It should be emphasized that the 3.3V supply for VCCIO in a bus powered design with a 3.3V logic
interface should come from an LDO which is supplied by the USB bus, or from the 3V3OUT pin of the
FT232B, and not from any other source.
相关PDF资料 |
PDF描述 |
|---|---|
| FT232HL-REEL | IC HS USB TO UART/FIFO 48LQFP |
| FT232RL-REEL | IC USB FS SERIAL UART 28-SSOP |
| FT245BL-REEL | IC USB FS PARALLEL FIFO 32-LQFP |
| FT245RL-REEL | IC USB TO PARALLEL FIFO 28-SSOP |
| FT4232HQ-REEL | IC USB HS QUAD UART/SYNC 64-QFN |
相关代理商/技术参数 |
参数描述 |
|---|---|
| FT232BL-TRAY | 制造商:Future Technology Devices International (FTDI Chip) 功能描述:USB-to-UART 1-CH 128Byte FIFO 5V 32-Pin LQFP Tray |
| FT232BM | 功能描述:UART 接口集成电路 Obsolete FT232BL RoHS:否 制造商:Texas Instruments 通道数量:2 数据速率:3 Mbps 电源电压-最大:3.6 V 电源电压-最小:2.7 V 电源电流:20 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:LQFP-48 封装:Reel |
| FT232BQ | 制造商:FTDI 制造商全称:FTDI 功能描述:USB UART ( USB - Serial) I.C. |
| FT232BQ-REEL | 功能描述:USB 接口集成电路 USB to Serial UART IC QFN-32 RoHS:否 制造商:Cypress Semiconductor 产品:USB 2.0 数据速率: 接口类型:SPI 工作电源电压:3.15 V to 3.45 V 工作电源电流: 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:WLCSP-20 |
| FT232HL | 制造商:FTDI 制造商全称:FTDI 功能描述:FT232H Single Channel Hi-Speed USB to Multipurpose UART/FIFO IC |
发布紧急采购，3分钟左右您将得到回复。