参数资料
型号: FTLF8528P2BNV
厂商: Finisar Corporation
文件页数: 7/12页
文件大小: 0K
描述: TXRX OPT SFP 8 GB/S 850NM
标准包装: 1
数据速率: 8.5Gbps
波长: 850nm
应用: 以太网
电源电压: 3 V ~ 3.6 V
连接器类型: LC 双工
安装类型: SFP+
产品目录页面: 326 (CN2011-ZH PDF)
其它名称: 775-1046
FTLF8528P2BNV Pluggable SFP+ Product Specification – November 2007
VIII. Digital Diagnostic Functions
Finisar FTLF8528P2BNV SFP+ transceivers support the 2-wire serial communication
protocol as defined in the SFP MSA 6 . It is very closely related to the E 2 PROM defined in
the GBIC standard, with the same electrical specifications.
The standard SFP serial ID provides access to identification information that describes
the transceiver’s capabilities, standard interfaces, manufacturer, and other information.
Additionally, Finisar SFP transceivers provide a enhanced digital diagnostic monitoring
interface, which allows real-time access to device operating parameters such as
transceiver temperature, laser bias current, transmitted optical power, received optical
power and transceiver supply voltage. It also defines a sophisticated system of alarm and
warning flags, which alerts end-users when particular operating parameters are outside of
a factory set normal range.
The SFP MSA defines a 256-byte memory map in E 2 PROM that is accessible over a
2-wire serial interface at the 8 bit address 1010000X (A0h). The digital diagnostic
monitoring interface makes use of the 8 bit address 1010001X (A2h), so the originally
defined serial ID memory map remains unchanged. The interface is identical to, and is
thus fully backward compatible with both the GBIC Specification and the SFP Multi
Source Agreement. The complete interface is described in Finisar Application Note AN-
2030: “Digital Diagnostics Monitoring Interface for SFP Optical Transceivers”.
The operating and diagnostics information is monitored and reported by a Digital
Diagnostics Transceiver Controller (DDTC) inside the transceiver, which is accessed
through a 2-wire serial interface. When the serial protocol is activated, the serial clock
signal (SCL, Mod Def 1) is generated by the host. The positive edge clocks data into the
SFP transceiver into those segments of the E 2 PROM that are not write-protected. The
negative edge clocks data from the SFP transceiver. The serial data signal (SDA, Mod
Def 2) is bi-directional for serial data transfer. The host uses SDA in conjunction with
SCL to mark the start and end of serial protocol activation. The memories are organized
as a series of 8-bit data words that can be addressed individually or sequentially.
For more information, please see the SFP MSA documentation 3,6 and Finisar Application
Note AN-2030.
Please note that evaluation board FDB-1027 is available with Finisar ModDEMO
software that allows simple to use communication over the 2-wire serial interface.
? Finisar Corporation November 21, 2007 Rev. B
Page 7
相关PDF资料
PDF描述
FTLX1341E2 TXRX OPT SFP+ 10 GB/S 220M
FTLX1371D3BCL TXRX OPT SFP+ 10 GB/S 220M
FTLX1412D3BCL TXRX OPT XFP 10 GB/S 1310NM
FTLX1412M3BCL TXRX OPT XFP 10 GB/S 1310NM
FTLX1441E2 TXRX OPT X2 10 GB/S 1310NM
相关代理商/技术参数
参数描述
FTLF8528P3BCV 功能描述:光纤发射器、接收器、收发器 2x/4x/8x FC8.5 Gb/s trnscvr LC Conn RoHS:否 制造商:Omron Electronics 产品:Transmitters 数据速率:3.5 Gbps 波长:850 nm 最大工作温度: 最小工作温度: 封装 / 箱体: 封装: 工作电源电压:
FTLF8528P3BNV 功能描述:光纤发射器、接收器、收发器 2x/4x/8x FC8.5 Gb/s trnscvr LC Conn RoHS:否 制造商:Omron Electronics 产品:Transmitters 数据速率:3.5 Gbps 波长:850 nm 最大工作温度: 最小工作温度: 封装 / 箱体: 封装: 工作电源电压:
FTLF8529P3BCV 功能描述:光纤发射器、接收器、收发器 4x/8x/16x FC, 14.025 Gb/s trnscvr RoHS:否 制造商:Omron Electronics 产品:Transmitters 数据速率:3.5 Gbps 波长:850 nm 最大工作温度: 最小工作温度: 封装 / 箱体: 封装: 工作电源电压:
FTLF8529P3BNV 功能描述:光纤发射器、接收器、收发器 4x/8x/16x FC, 14.025 Gb/s trnscvr RoHS:否 制造商:Omron Electronics 产品:Transmitters 数据速率:3.5 Gbps 波长:850 nm 最大工作温度: 最小工作温度: 封装 / 箱体: 封装: 工作电源电压:
FTLF8529P3PNV 制造商:Finisar Corporation 功能描述:TXRX 850NM VCSEL SFP