参数资料
型号: G3VM-61G2
厂商: Omron Electronics Inc-EMC Div
文件页数: 3/6页
文件大小: 0K
描述: RELAY SSR FET SPST 60V 4SOP
产品培训模块: Medical Solutions
产品目录绘图: G3VM Series Circuit
G3VM Series Footprint
G3VM Series 4-SOP
标准包装: 100
系列: G3VM
电路: SPST-NO(1 Form A)
输出类型: AC,DC
导通状态电阻: 2 欧姆
负载电流: 400mA
输入电压: 1.15VDC
电压 - 负载: 0 ~ 60 V
安装类型: 表面贴装
端接类型: 鸥翼型
封装/外壳: 4-SOP(0.228",5.80mm)
供应商设备封装: 4-SOP
包装: 管件
继电器类型: 继电器
产品目录页面: 2636 (CN2011-ZH PDF)
其它名称: G3VM61G2
Z3019
■ Protection from Spike Voltage on the
Output Terminals
If a spike voltage exceeding the absolute maximum rated value is
generated between the output terminals, insert a C-R snubber or
■ Load Connection
Do not short-circuit the input and output terminals while the relay is
operating or the relay may malfunction.
AC Connection
?
clamping diode in parallel to the load as shown in the following circuit
diagram to limit the spike voltage.
Spike Voltage Protection Circuit Example
+
?
1
2
3
6
5
4
Load
Or:
AC
+
DC
Or:
?
DC
+
DC Sin g le Connection
?
+
?
1
2
6
5
Load
+
DC
3
4
+
1
6
?
2
3
5
4
Load
?
DC
+
+
?
?
■ Unused Terminals (6-pin models only)
Terminal 3 is connected to the internal circuit. Do not connect any-
thing to terminal 3 externally.
DC Parallel Connection
1
2
3
6
5
4
Load
+
DC
■ Pin Strength for Automatic Mounting
In order to maintain the characteristics of the relay, the force imposed
on any pin of the relay for automatic mounting must not exceed the
following.
In direction A: 1.96 N
In direction B: 1.96 N
Guidelines for Mounting Devices on PCBs
■ Cleaning
When ions in the flux enter into the product during soldering, fluctua-
tion in device performance or corrosion may occur. Be sure to wash
away any flux residue which contains Cl or Na ions.
The following types of solvents are recommended for cleaning the
flux:
? Asahi Clean AK-225AES
? Kao Cleanthru 750H
? Pine-Alpha ST-100S
Cleaning Conditions
Cleaning conditions and precautions may vary according to product
specifications.
General precautions for dip cleaning
Dipping time varies according to the solvent used.
However, as a general guideline, it is recommended that the dip
time be limited to three minutes.
General precautions for ultrasonic cleaning
When ultrasonic cleaning is conducted for an excessively long
time, contact between the product resin and the metal leads may
lessen. Also, excessive ultrasonic stress may cause cracks in the
pellet.
It is recommended that the applied stress be minimized.
Recommended conditions for standard ultrasonic cleaning
Frequency: 27kHz to 29kHz
Output: 0.25 W/cm 2 or less
Time: 30 seconds or less
Temperature: 50 ° C (may vary according to the type of solvent used)
Cleaning must be conducted with the printed circuit board or device
floating on the solvent, so as to avoid direct contact between the PCB
or device and the ultrasonic vibrator.
Handling Precautions
Do not touch the device’s mark-bearing surface with your hand or
with a brush while cleaning or applying cleaning liquid to the device.
This may erase device markings. It is important to confirm that nei-
ther the solvent used for cleaning nor the cleaning conditions will
damage the device package.
MOS FET Relays
Technical Information
3
相关PDF资料
PDF描述
PS7122AL-2A-E3-A SSR OCMOS FET 200MA 2CH NO 8-SMD
PRM-14462 BOX RACKMOUNT 3.5" X 8" PLASTIC
TC164-JR-07120KL RES ARRAY 120K OHM 4 RES 1206
1-644465-0 CONN RECEPT 10POS MTA-156 18AWG
1-644471-0 CONN RECEPT 10POS 22AWG MTA156
相关代理商/技术参数
参数描述
G3VM-61G2_10 制造商:OMRON 制造商全称:Omron Electronics LLC 功能描述:MOS FET Relays
G3VM-61G2TR 制造商:OMRON 制造商全称:Omron Electronics LLC 功能描述:MOS FET Relays
G3VM-61G3 制造商:Omron Corporation 功能描述:RELAY SSR FET SPST 60V 4SOP
G3VM-61G3(TR) 制造商:Omron Corporation 功能描述:RELAY SSR FET SPST 60V 4SOP
G3VM61G3TR 制造商:Omron Corporation 功能描述:RELAY SSR FET SPST 60V 4SOP