参数资料
型号: GSC2176
厂商: GTM CORPORATION
元件分类: 线性稳压
英文描述: 5.0 AMP POSITIVE VOLTAGE REGULATOR
中文描述: 5.0放大器正电压稳压器
文件页数: 3/7页
文件大小: 374K
代理商: GSC2176
GSC2176
Page: 3/7
ISSUED DATE :2006/03/07
REVISED DATE :
Ordering Information ( contd. )
Part Number
Marking
Output Voltage
Part Number
Marking
Output Voltage
GSC2176-AD
6GAD2
XXXX
Adjustable
Detailed Description
The GSC2176 of COMS regulator contain a PMOS pass transistor, voltage reference, error amplifier,
over-current protection, and thermal shutdown.
The P-channel pass transistor receives data from the error amplifier, over-current shutdown, and thermal
protection circuits. During normal operation, the error amplifier compares the output voltage to a precision
reference. Over-current and Thermal shutdown circuits become active when the junction temperature exceeds
150 : , or the current exceeds 600mA. During thermal shutdown, the output voltage remains low. Normal
operation is restored when the junction temperature drops below 120 : .
The GSC2176 switches from voltage mode to current mode when the load exceeds the rated output current.
This prevents over-stress. The GSC2176 also incorporates current fold-back to reduce power dissipation when
the output is short circuited. This feature becomes active when the output drops below 0.8 volts, and reduces
the current flow by 65%. Full current is restored when the voltage exceeds 0.8 volts.
External Capacitors
The GSC2176 is stable with an output capacitance to ground of 2.2 F or greater. Ceramic capacitors have the
lowest ESR, and will offer the best AC performance. Conversely, Aluminum Electrolytic capacitors exhibit the
highest ESR, resulting in the poorest AC response. Unfortunately, large value ceramic capacitors are
comparatively expensive. One option is to parallel a 0.1uF ceramic capacitor with a 10uF Aluminum Electrolytic.
The benefit is low ESR, high capacitance, and low overall cost.
A second capacitor is recommended between the input and ground to stabilize VIN. The input capacitor should
be at least 0.1 F to have a beneficial effect.
All capacitors should be placed in close proximity to the pins. A “Quiet” ground termination is desirable. This
can be achieved with a “Star” connection.
Enable
The Enable pin normally floats high. When actively, pulled low, the PMOS pass transistor shuts off, and all
internal circuits are powered down. In this state, the quiescent current is less than 1 A. This pin behaves much
like an electronic switch.
ADJ
The ADJ pin is the positive input to the error amplifier which, due to the PMOS pass element inversion, means
it is actually the negative input of the LDO feedback loop. The feedback works to keep the voltage at the ADJ
pin 1.215V with respect to ground. Since the internal circuitry at the ADJ pin is essentially an ESD protected
CMOS gate the input current at the ADJ pin is virtually zero.
相关PDF资料
PDF描述
GSC24BC01 2-WIRE SERIAL EEPROMS
GSC24BC02 2-WIRE SERIAL EEPROMS
GSC24BC04 2-WIRE SERIAL EEPROMS
GSC24BC08 2-WIRE SERIAL EEPROMS
GSC24BC16 2-WIRE SERIAL EEPROMS
相关代理商/技术参数
参数描述
GSC219 制造商:Thomas & Betts 功能描述:Two-Piece - Outer sleeve Bronze Grounding Connector for shielded and coaxial cab 制造商:Thomas & Betts 功能描述:OUTER SLEEVE 制造商:Thomas & Betts 功能描述:Connector Accessories Sleeve Green
GSC219NP 制造商:Thomas & Betts 功能描述:SHIELDKON-STD
GSC-219NP 制造商:Thomas & Betts 功能描述:SHIELDKON-STD
GSC225 制造商:Thomas & Betts 功能描述:Connector Accessories Sleeve Purple
GSC-225 制造商:Thomas & Betts 功能描述:OUTER SLEEVE