参数资料
| 型号： | HC55143IM |
| 厂商： | Intersil |
| 文件页数： | 24/36页 |
| 文件大小： | 0K |
| 描述： | IC SLIC UNIVERSAL LP 32-PLCC |
| 标准包装： | 30 |
| 系列： | UniSLIC14 |
| 功能： | 用户线路接口概念（SLIC） |
| 电路数： | 1 |
| 电源电压： | 4.75 V ~ 5.25 V |
| 电流 - 电源： | 2.25mA |
| 功率（瓦特）： | 1.4W |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 32-LCC（J 形引线） |
| 供应商设备封装： | 32-PLCC |
| 包装： | 管件 |
| 包括： | 电池跟踪抗削顶失真，回路和接地键检测，振铃控制 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页当前第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页
30
FN4659.13
June 1, 2006
88
8
VBH
High Battery Supply (negative with respect to GND).
99
9
VBL
Low Battery Supply (negative with respect to GND, magnitude
≤ VBH).
10
RDC_RAC
Resistive Feed/Anti Clipping - Performs anti clipping function on constant current application and sets
the slope of the resistive feed curve for constant voltage applications.
11
14
CRT_REV
_LVM
Ring Trip, Soft Polarity Reversal and Line Voltage Measurement - A capacitor when placed between the
CRT_REV_LVM pin and +5V performs 3 mutually exclusive functions. When the SLIC is configured in the
Ringing mode it provides filtering of the ringing signal to prevent false detect. When the SLIC is transitioning
between the Forward Active State and Reverse Active State it provides Soft Polarity Reversal and performs
charge storage in the Line Voltage Measurement State. Recommended value 0.47
F.
12
11
CDC
Filter Capacitor - The CDC Capacitor removes the VF signals from the battery feed control loop.
13
12
DT
Tip side of Ring Trip Detector - Ring trip detection is accomplished by connecting an external network
to a detector in the SLIC with inputs DT and DR. Ring trip occurs when the voltage on DT is more
negative than the voltage on DR.
14
13
DR
Ring Side of Ring Trip Detector - Ring trip detection is accomplished by connecting an external
network to a detector in the SLIC with inputs DT and DR. Ring trip occurs when the voltage on DR is
more positive than the voltage on DT.
-
15
-
C5
Activates Test Relay TRLY2. TTL Compatible Logic Input. C5 input high, test relay TRLT2 Low(ON).
C5 input floating, test relay TRLY2 High(OFF). This is due to an internal 100k
pull down resistor.
-
16
-
C4
Activates Test Relay TRLY1. TTL Compatible Logic Input. C4 input high, test relay TRLT1 Low(ON).
C4 input floating, test relay TRLY1 High(OFF). This is due to an internal 100k
pull down resistor.
15
17
16
C3
TTL Compatible Logic Input. The logic states of C1, C2 and C3 determine the operating states of the
SLIC. Reference Table 1 for details.
16
18
17
C2
TTL Compatible Logic Input. The logic states of C1, C2 and C3 determine the operating states of the
SLIC. Reference Table 1 for details.
17
19
18
C1
TTL Compatible Logic Input. The logic states of C1, C2 and C3 determine the operating states of the
SLIC. Reference Table 1 for details.
18
20
19
SHD
Switch Hook Detect - Active during off hook, ground key and loopback. Reference Table 1 for details.
19
21
15
GKD_LVM
Ground Key Detector and Line Voltage Measurement - Reference Table 1 for details.
20
22
20
VCC
5V Supply.
21
23
21
RD
Loop Current Threshold Programming Pin - A resistor between this pin and ground will determine the
trigger level for the loop current detect circuit. See Equation 7.
22
24
22
ROH
Off Hook Overload Setting Resistor - Used to set combined overhead for voice and pulse metering
signals. See Equation 10.
23
25
23
ILIM
Current Limit Programming Pin - A resistor between this pin and ground will determine the constant
current limit of the feed curve. See Equation 11.
24
26
24
RSYNC_REV
Ring Synchronization Input and Reversal Time Setting. A resistor between this pin and GND
determines the polarity reversal time. Synchronization of the closing of the relay at zero voltage is
achieved via a ring sync pulse (5V to 0V) synchronized to the ring signal zero voltage crossing
(Reference Figure 18).
25
27
28
AGND
Analog ground
26
28
25
VRX
Receive Input - Ground referenced 4-wire side.
27
29
26
SPM
Pulse Metering Signal Input. If pulse metering is not used, then this pin should be grounded as close
to the device pin as possible. Input impedance to ground = 125k
.
28
30
27
VTX
Transmit Output - Ground referenced 4-wire side.
-
31
-
TRLY2
Test Relay Driver 2. Open Collector Transistor. Internal Clamp between it’s output and ground
elimnates the need to place an external snubber diode across Test Relay Driver. TRLY2 may be
connected to maximum of 14V.
-
32
-
TRLY1
Test Relay Driver 1. Open Collector Transistor. Internal Clamp between it’s output and ground
elimnates the need to place an external snubber diode across Test Relay Driver. TRLY1 may be
connected to maximum of 14V.
Pin Descriptions (Continued)
28
PIN
PLCC
32
PIN
PLCC
28
PIN
SOIC
SYMBOL
DESCRIPTION
HC55120, HC55121, HC55130, HC55140, HC55142, HC55143, HC55150
相关PDF资料 |
PDF描述 |
|---|---|
| HC5515CMZ | IC SLIC ITU CO/PABX LP 28-PLCC |
| HC9P5504B-5ZX96 | IC SLIC EIA/ITU PABX 24-SOIC |
| HD3-6402R-9Z | IC UART CMOS 5V 2MHZ 40-DIP |
| HD9P6409-9Z96 | IC MED MANCHESTER 1MHZ 20-SOIC |
| HI1-0390-2 | IC SWITCH DUAL SPDT 16CDIP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| HC5514X | 制造商:Harris Corporation 功能描述: |
| HC5514XB | 制造商:Harris Corporation 功能描述: |
| HC5514XEVAL1 | 功能描述:界面开发工具 UNISLIC14 FAMILY EVALUATION BRD RoHS:否 制造商:Bourns 产品:Evaluation Boards 类型:RS-485 工具用于评估:ADM3485E 接口类型:RS-485 工作电源电压:3.3 V |
| HC5514XEVAL2 | 功能描述:界面开发工具 EVALRD TO GO W/IDT MOTHER BRD RoHS:否 制造商:Bourns 产品:Evaluation Boards 类型:RS-485 工具用于评估:ADM3485E 接口类型:RS-485 工作电源电压:3.3 V |
| HC5514XEVAL3 | 功能描述:EVAL BOARD TI CODEC MOTHER BOARD RoHS:否 类别:编程器，开发系统 >> 过时/停产零件编号 系列:UniSLIC14 标准包装:1 系列:- 传感器类型:CMOS 成像，彩色（RGB） 传感范围:WVGA 接口:I²C 灵敏度:60 fps 电源电压:5.7 V ~ 6.3 V 嵌入式:否 已供物品:成像器板 已用 IC / 零件:KAC-00401 相关产品:4H2099-ND - SENSOR IMAGE WVGA COLOR 48-PQFP4H2094-ND - SENSOR IMAGE WVGA MONO 48-PQFP |
发布紧急采购，3分钟左右您将得到回复。