- 您现在的位置：买卖IC网 > PDF目录223877 > HCPL-4504#300E (AGILENT TECHNOLOGIES INC) 1 CHANNEL LOGIC OUTPUT OPTOCOUPLER PDF资料下载
参数资料
| 型号： | HCPL-4504#300E |
| 厂商： | AGILENT TECHNOLOGIES INC |
| 元件分类： | 光电耦合器 |
| 英文描述： | 1 CHANNEL LOGIC OUTPUT OPTOCOUPLER |
| 封装： | SURFACE MOUNT, DIP-8 |
| 文件页数： | 19/20页 |
| 文件大小： | 303K |
| 代理商： | HCPL-4504#300E |
8
Insulation and Safety Related Specifications
Value
Parameter
Symbol
Units
Conditions
HCPL-4504
HCPL-J454
HCPL-0454 HCNW4504
Minimum External
L(101)
7.1
7.4
4.9
9.6
mm
Measured from input
Air Gap (External
terminals to output
Clearance)
terminals, shortest
distance through air.
Minimum External
L(102)
7.4
8.0
4.8
10.0
mm
Measured from input
Tracking (External
terminals to output
Creepage)
terminals, shortest
distance path along
body.
Minimum Internal
0.08
0.5
0.08
1.0
mm
Through insulation
Plastic Gap
distance, conductor
(Internal Clearance)
to conductor,
usually the direct
distance between the
photoemitter and
photodetector inside
the optocoupler
cavity.
Minimum Internal
NA
4.0
mm
Measured from input
Tracking (Internal
terminals to output
Creepage)
terminals, along
internal cavity.
Tracking Resistance
CTI
≥ 175
≥ 200
Volts DIN IEC 112/VDE
(Comparative
0303 Part 1
Tracking Index)
Isolation Group
IIIa
Material Group
(DIN VDE 0110,
1/89, Table 1)
All Agilent data sheets report the
creepage and clearance inherent
to the optocoupler component
itself. These dimensions are
needed as a starting point for the
equipment designer when
determining the circuit insulation
requirements.
However, once mounted on a
printed circuit board, minimum
creepage and clearance
requirements must be met as
specified for individual
equipment standards. For
creepage, the shortest distance
path along the surface of a
printed circuit board between the
solder fillets of the input and
output leads must be considered.
There are recommended
techniques such as grooves and
ribs which may be used on a
printed circuit board to achieve
desired creepage and clearances.
Creepage and clearance distances
will also change depending on
factors such as pollution degree
and insulation level.
相关PDF资料 |
PDF描述 |
|---|---|
| HCPL-4504-300 | 1 CHANNEL LOGIC OUTPUT OPTOCOUPLER |
| HCPL-5501 | NPN-OUTPUT DC-INPUT OPTOCOUPLER |
| HCPL-5531 | Receptacle With No Tail |
| HCPL-573K | NPN-OUTPUT DC-INPUT OPTOCOUPLER |
| HCPL-6730 | Hermetically Sealed. Low IF. Wide Vcc. High Gain Optocouplers |
相关代理商/技术参数 |
参数描述 |
|---|---|
| HCPL-4504-320E | 功能描述:高速光耦合器 1MBd 1Ch 12mA RoHS:否 制造商:Avago Technologies 电流传递比: 最大波特率: 最大正向二极管电压:1.75 V 最大反向二极管电压:5 V 最大功率耗散:40 mW 最大工作温度:+125 C 最小工作温度:- 40 C 封装 / 箱体:SOIC-5 封装:Tube |
| HCPL-4504-360E | 功能描述:高速光耦合器 1MBd 1Ch 12mA RoHS:否 制造商:Avago Technologies 电流传递比: 最大波特率: 最大正向二极管电压:1.75 V 最大反向二极管电压:5 V 最大功率耗散:40 mW 最大工作温度:+125 C 最小工作温度:- 40 C 封装 / 箱体:SOIC-5 封装:Tube |
| HCPL-4504-500E | 功能描述:高速光耦合器 1MBd 1Ch 12mA RoHS:否 制造商:Avago Technologies 电流传递比: 最大波特率: 最大正向二极管电压:1.75 V 最大反向二极管电压:5 V 最大功率耗散:40 mW 最大工作温度:+125 C 最小工作温度:- 40 C 封装 / 箱体:SOIC-5 封装:Tube |
| HCPL-4504-520E | 功能描述:高速光耦合器 1MBd 1Ch 12mA RoHS:否 制造商:Avago Technologies 电流传递比: 最大波特率: 最大正向二极管电压:1.75 V 最大反向二极管电压:5 V 最大功率耗散:40 mW 最大工作温度:+125 C 最小工作温度:- 40 C 封装 / 箱体:SOIC-5 封装:Tube |
| HCPL-4504-560E | 功能描述:高速光耦合器 1MBd 1Ch 12mA RoHS:否 制造商:Avago Technologies 电流传递比: 最大波特率: 最大正向二极管电压:1.75 V 最大反向二极管电压:5 V 最大功率耗散:40 mW 最大工作温度:+125 C 最小工作温度:- 40 C 封装 / 箱体:SOIC-5 封装:Tube |
发布紧急采购，3分钟左右您将得到回复。