- 您现在的位置：买卖IC网 > PDF目录228557 > HEDM-5600 Quick Assembly Two and Three Channel Optical Encoders PDF资料下载
参数资料
| 型号： | HEDM-5600 |
| 英文描述： | Quick Assembly Two and Three Channel Optical Encoders |
| 中文描述： | 快速大会二及中三通道光学编码器 |
| 文件页数： | 14/15页 |
| 文件大小： | 291K |
| 代理商： | HEDM-5600 |
8
Mounting Considerations
The HEDS-5540 and 5640 three
channel encoders and the HEDM
Series high resolution encoders
must be aligned using the aligning
pins as specified in Figure 3, or
using the HEDS-8910 Alignment
Tool as shown in Encoder
Mounting and Assembly.
The use of aligning pins or
alignment tool is recommended
but not required to mount the
HEDS-5500 and 5600. If these
two channel encoders are
attached to a motor with the screw
sizes and mounting tolerances
specified in the mechanical
characteristics section without
any additional mounting bosses,
the encoder output errors will be
within the maximums specified in
the encoding characteristics
section.
The HEDS-5500 and 5540 can be
mounted to a motor using either
the two screw or three screw
mounting option as shown in
Figure 2. The optional aligning
pins shown in Figure 3 can be
used with either mounting option.
The HEDS-5600, 5640, and
HEDM-5600 have external
mounting ears which may be used
for mounting to larger motor base
plates. Figure 4 shows the
necessary mounting holes with
optional aligning pins and motor
boss.
Figure 1. Pull-up Resistors on HEDS-5X40 Encoder Outputs.
Figure 3. Optional Mounting Aids.
Figure 2. Mounting Holes.
11.10 / 10.94
(0.438 / 0.431)
2.39 / 2.34
(0.096 / 0.092)
相关PDF资料 |
PDF描述 |
|---|---|
| HEDM-5600-B01 | Quick Assembly Two and Three Channel Optical Encoders |
| HEDM-5600-B02 | Quick Assembly Two and Three Channel Optical Encoders |
| HEDM-5600-B03 | Quick Assembly Two and Three Channel Optical Encoders |
| HEDM-5600-B04 | Quick Assembly Two and Three Channel Optical Encoders |
| HEDM-5600-B05 | Quick Assembly Two and Three Channel Optical Encoders |
相关代理商/技术参数 |
参数描述 |
|---|---|
| HEDM-5600#B06 | 功能描述:编码器 2 Channel 1000 CPR 1/4in Film CW RoHS:否 制造商:Avago Technologies 产品:Optical Encoders 类型:Absolute 每转脉冲: 制动器数量: 通道数量:2 安装风格:Through Hole 端接类型:Solder Pin 输出: 轴类型: 带开关: 电源电压:5 V 工作温度范围:- 40 C to + 115 C |
| HEDM-5600#B12_W1202-495249 | 制造商:Avago Technologies 功能描述: |
| HEDM-5600#B13 | 功能描述:编码器 2 Channel 1000 CPR 8mm Film CW RoHS:否 制造商:Avago Technologies 产品:Optical Encoders 类型:Absolute 每转脉冲: 制动器数量: 通道数量:2 安装风格:Through Hole 端接类型:Solder Pin 输出: 轴类型: 带开关: 电源电压:5 V 工作温度范围:- 40 C to + 115 C |
| HEDM-5600#J06 | 功能描述:编码器 2 Channel 1024 CPR 1/4in Film CW RoHS:否 制造商:Avago Technologies 产品:Optical Encoders 类型:Absolute 每转脉冲: 制动器数量: 通道数量:2 安装风格:Through Hole 端接类型:Solder Pin 输出: 轴类型: 带开关: 电源电压:5 V 工作温度范围:- 40 C to + 115 C |
| HEDM-5600-B01 | 制造商:HP 制造商全称:Agilent(Hewlett-Packard) 功能描述:Quick Assembly Two and Three Channel Optical Encoders |
发布紧急采购，3分钟左右您将得到回复。