收藏本站
参数资料
型号： HFA3863IN
厂商： INTERSIL CORP
元件分类： 无绳电话/电话
英文描述： Direct Sequence Spread Spectrum Baseband Processor
中文描述： TELECOM, CELLULAR, BASEBAND CIRCUIT, PQFP64
封装： 10 X 10 MM, PLASTIC, MS-026ACD, TQFP-64
文件页数： 31/39页
文件大小： 305K
代理商： HFA3863IN
4-31
Bit 2
Internal digital loop back mode (SDI pin becomes LOCK input to acquisition block).
0 = normal chip operation loop back disabled.
1 = loop back enabled, A/D and D/A converters bypassed, chip will not respond to external signals.
Bit 1
enable PN to lower test bus address (2-0).
0 = normal.
1 = PN to test bus address.
Bit 0
enable PN to upper test bus address (7-3).
0 = normal.
1 = PN to test bus address.
CONFIGURATION REGISTER ADDRESS 33 (42h) R/W TEST MODES 2 (Continued)
CONFIGURATION REGISTER ADDRESS 34 (44h) R/W TEST BUS ADDRESS
Bits 7:0
Address bits for various tests. See Tech Brief #TBD for a description of the factory test modes.
CONFIGURATION REGISTER ADDRESS 35 (46h) R/W ED THRESHOLD
Bit 7
Energy Detect Threshold control.
0 = threshold is relative to noise floor.
1 = threshold is absolute.
Bits 6:0
ED Threshold. Range 0 - 127dBm. RSSI > threshold triggers ED.
CONFIGURATION REGISTER ADDRESS 36 (48h) R/W DELAY SPREAD THRESHOLD FOR CMF CONTROL
Bit 7:5
Delay spread count. Range 0 - 7. Used for evaluation only.
Bits 4:0
Delay spread threshold. 0.xxxx.
This and the next 3 thresholds are used in the following formula to determine which CMF weights to use. CW detect is not
configurable.
If
(CW and RSSI < (CW RSSI threshold + NoiseFloor)) or (no CW and RSSI < (SNR threshold #1 + NoiseFloor)) or (no CW
and delay spread < threshold and RSSI < (SNR threshold #2 + NoiseFloor))
then
;
use Default CMF weights,
else,
use Calculated CMF weights.
CONFIGURATION REGISTER ADDRESS 37 (4Ah) R/W CW RSSI THRESHOLD FOR CMF CONTROL
Bit 7
R/W but not currently used internally, should be set to zero to ensure compatibility with future revisions.
Bit 6
Force default CMF weights.
0 = normal.
1 = force default CMF weights.
Bit 5
Force calculated CMF weights.
0 = normal.
1 = force calculated CMF weights.
Note: this cannot be combined with bit 6. A “1” on both will produce undefined results.
Bits 4:0
CW RSSI threshold, range 0 to 31dB.
CONFIGURATION REGISTER ADDRESS 38 (4Ch) R/W SNR THRESHOLD #1 FOR CMF CONTROL
Bits 7:4
R/W but not currently used internally, should be set to zero to ensure compatibility with future revisions.
Bits 3:0
SNR threshold #1 range 0 to 15dB.
CONFIGURATION REGISTER ADDRESS 39 (4Eh) R/W SNR THRESHOLD #2 FOR CMF CONTROL
Bits 7:4
R/W but not currently used internally, should be set to zero to ensure compatibility with future revisions.
Bits 4:0
SNR threshold #2, range 0 to 31dB.
CONFIGURATION REGISTER ADDRESS 40 (50h) R/W DC OFFSET THRESHOLD
Bits 7:6
R/W but not currently used internally, should be set to zero to ensure compatibility with future revisions.
Bits 5:0
DC offset Threshold, range 0 to 63dB. RSSI > (threshold + NoiseFloor) enables DC offset calculation and compensation.
HFA3863
相关PDF资料
PDF描述
HFA3863IN96 Direct Sequence Spread Spectrum Baseband Processor
HFA3863 Direct Sequence Spread Spectrum Baseband Processor(直接序列扩谱基带处理器)
HFA3983IV96 2.4GHz Power Amplifier and Detector
HFA3983 2.4GHz Power Amplifier and Detector(2.4GHz 功率放大器探测器)
HFA3983IV 2.4GHz Power Amplifier and Detector
相关代理商/技术参数
参数描述
HFA3863IN96 制造商:INTERSIL 制造商全称:Intersil Corporation 功能描述:Direct Sequence Spread Spectrum Baseband Processor
HFA3925 制造商:INTERSIL 制造商全称:Intersil Corporation 功能描述:null2.4GHz - 2.5GHz 250mW Power Amplifier
HFA3925IA 制造商:Rochester Electronics LLC 功能描述:- Bulk 制造商:Harris Corporation 功能描述:
HFA3925IA1K 制造商:Rochester Electronics LLC 功能描述:- Bulk
HFA3925IA96 制造商:Rochester Electronics LLC 功能描述:- Bulk
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*