- 您现在的位置：买卖IC网 > PDF目录65465 > HMC128 (HITTITE MICROWAVE CORP) 1800 MHz - 5000 MHz RF/MICROWAVE DOUBLE BALANCED MIXER, 10 dB CONVERSION LOSS-MAX PDF资料下载
参数资料
| 型号： | HMC128 |
| 厂商： | HITTITE MICROWAVE CORP |
| 元件分类： | 混频器 |
| 英文描述： | 1800 MHz - 5000 MHz RF/MICROWAVE DOUBLE BALANCED MIXER, 10 dB CONVERSION LOSS-MAX |
| 封装： | MINIATURE, DIE-3 |
| 文件页数： | 6/6页 |
| 文件大小： | 177K |
| 代理商： | HMC128 |
M
IX
E
R
S
-
DO
UBL
E
-B
A
L
A
N
C
E
D
-
C
H
IP
4
4 - 7
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
Assembly Diagram
Handling Precautions
Follow these precautions to avoid permanent damage.
Storage: All bare die are placed in either Waffle or Gel based ESD protective containers, and then sealed in an ESD protective bag
for shipment. Once the sealed ESD protective bag has been opened, all die should be stored in a dry nitrogen environment.
Cleanliness: Handle the chips in a clean environment. DO NOT attempt to clean the chip using liquid cleaning systems.
Static Sensitivity: Follow ESD precautions to protect against ESD strikes.
Transients: Suppress instrument and bias supply transients while bias is applied. Use shielded signal and bias cables to minimize
inductive pick-up.
General Handling: Handle the chip along the edges with a vacuum collet or with a sharp pair of bent tweezers. The surface of the
chip has fragile air bridges and should not be touched with vacuum collet, tweezers, or fingers.
Mounting
The chip is back-metallized and can be die mounted with AuSn eutectic preforms or with electrically conductive epoxy. The mounting
surface should be clean and flat.
Eutectic Die Attach: A 80/20 gold tin preform is recommended with a work surface temperature of 255 °C and a tool temperature
of 265 °C. When hot 90/10 nitrogen/hydrogen gas is applied, tool tip temperature should be 290 °C. DO NOT expose the chip
to a temperature greater than 320 °C for more than 20 seconds. No more than 3 seconds of scrubbing should be required for
attachment.
Epoxy Die Attach: Apply a minimum amount of epoxy to the mounting surface so that a thin epoxy fillet is observed around the
perimeter of the chip once it is placed into position. Cure epoxy per the manufacturer’s schedule.
Wire Bonding
Ball or wedge bond with 0.025 mm (1 mil) diameter pure gold wire.
Thermosonic wirebonding with a nominal stage temperature of
150 °C and a ball bonding force of 40 to 50 grams or wedge bonding force of 18 to 22 grams is recommended. Use the minimum
level of ultrasonic energy to achieve reliable wirebonds. Wirebonds should be started on the chip and terminated on the package or
substrate. All bonds should be as short as possible <0.31 mm (12 mils).
HMC128
v03.1007
GaAs MMIC DOUBLE-BALANCED
MIXER, 1.8 - 5.0 GHz
相关PDF资料 |
PDF描述 |
|---|---|
| HMC129LC4 | 4000 MHz - 8000 MHz RF/MICROWAVE DOUBLE BALANCED MIXER, 9 dB CONVERSION LOSS-MAX |
| HMC129 | 4000 MHz - 8000 MHz RF/MICROWAVE DOUBLE BALANCED MIXER, 9 dB CONVERSION LOSS-MAX |
| HMC132C8 | 0 MHz - 8000 MHz RF/MICROWAVE SGL POLE DOUBLE THROW SWITCH, 3.1 dB INSERTION LOSS |
| HMC132G7 | 0 MHz - 6000 MHz RF/MICROWAVE SGL POLE DOUBLE THROW SWITCH, 2.6 dB INSERTION LOSS |
| HMC132P7 | 0 MHz - 6000 MHz RF/MICROWAVE SGL POLE DOUBLE THROW SWITCH, 2.6 dB INSERTION LOSS |
相关代理商/技术参数 |
参数描述 |
|---|---|
| HMC128_07 | 制造商:HITTITE 制造商全称:Hittite Microwave Corporation 功能描述:GaAs MMIC DOUBLE-BALANCED MIXER, 1.8 - 5.0 GHz |
| HMC128_09 | 制造商:HITTITE 制造商全称:Hittite Microwave Corporation 功能描述:GaAs MMIC DOUBLE-BALANCED MIXER, 1.8 - 5.0 GHz |
| HMC128G8 | 制造商:HITTITE 制造商全称:Hittite Microwave Corporation 功能描述:GaAs MMIC SMT DOUBLEBALANCED MIXER, 1.8 - 5 GHz |
| HMC128G8_06 | 制造商:HITTITE 制造商全称:Hittite Microwave Corporation 功能描述:GaAs MMIC SMT DOUBLEBALANCED MIXER, 1.8 - 5 GHz |
| HMC128G8_08 | 制造商:HITTITE 制造商全称:Hittite Microwave Corporation 功能描述:GaAs MMIC SMT DOUBLE - BALANCED MIXER, 1.8 - 5 GHz |
发布紧急采购，3分钟左右您将得到回复。