- 您现在的位置：买卖IC网 > PDF目录65467 > HMC322 (HITTITE MICROWAVE CORP) 0 MHz - 10000 MHz RF/MICROWAVE SGL POLE EIGHT THROW SWITCH, 3.4 dB INSERTION LOSS PDF资料下载
参数资料
| 型号： | HMC322 |
| 厂商： | HITTITE MICROWAVE CORP |
| 元件分类： | 开关 |
| 英文描述： | 0 MHz - 10000 MHz RF/MICROWAVE SGL POLE EIGHT THROW SWITCH, 3.4 dB INSERTION LOSS |
| 封装： | 1.45 X 1.60 MM, 0.10 MM, DIE-14 |
| 文件页数： | 6/6页 |
| 文件大小： | 170K |
| 代理商： | HMC322 |
S
W
IT
CHE
S
-
CHI
P
4
4 - 19
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
Assembly Diagram
Handling Precautions
Follow these precautions to avoid permanent damage.
Storage: All bare die are placed in either Waffle or Gel based ESD protective containers, and then sealed in an ESD protective bag
for shipment. Once the sealed ESD protective bag has been opened, all die should be stored in a dry nitrogen environment.
Cleanliness: Handle the chips in a clean environment. DO NOT attempt to clean the chip using liquid cleaning systems.
Static Sensitivity: Follow ESD precautions to protect against ESD strikes.
Transients: Suppress instrument and bias supply transients while bias is applied. Use shielded signal and bias cables to minimize
inductive pick-up.
General Handling: Handle the chip along the edges with a vacuum collet or with a sharp pair of bent tweezers. The surface of the
chip has fragile air bridges and should not be touched with vacuum collet, tweezers, or fingers.
Mounting
The chip is back-metallized and can be die mounted with electrically conductive epoxy. The mounting surface should be clean
and flat.
Epoxy Die Attach: Apply a minimum amount of epoxy to the mounting surface so that a thin epoxy fillet is observed around the
perimeter of the chip once it is placed into position. Cure epoxy per the manufacturer’s schedule.
Wire Bonding
Ball or wedge bond with 0.025mm (1 mil) diameter pure gold wire. Thermosonic wirebonding with a nominal stage temperature of
150 deg. C and a ball bonding force of 40 to 50 grams or wedge bonding force of 18 to 22 grams is recommended. Use the minimum
level of ultrasonic energy to achieve reliable wirebonds. Wirebonds should be started on the chip and terminated on the package or
substrate. All bonds should be as short as possible <0.31mm (12 mils).
HMC322
v01.0907
GaAs MMIC SP8T NON-REFLECTIVE
SWITCH, DC - 10 GHz
相关PDF资料 |
PDF描述 |
|---|---|
| HMC324MS8G | 0 MHz - 3000 MHz RF/MICROWAVE WIDE BAND LOW POWER AMPLIFIER |
| HMC326MS8G | 3000 MHz - 4500 MHz RF/MICROWAVE WIDE BAND MEDIUM POWER AMPLIFIER |
| HMC326MS8GTR | 3000 MHz - 4500 MHz RF/MICROWAVE WIDE BAND MEDIUM POWER AMPLIFIER |
| HMC326MS8GETR | 3000 MHz - 4500 MHz RF/MICROWAVE WIDE BAND MEDIUM POWER AMPLIFIER |
| HMC326MS8GE | 3000 MHz - 4500 MHz RF/MICROWAVE WIDE BAND MEDIUM POWER AMPLIFIER |
相关代理商/技术参数 |
参数描述 |
|---|---|
| HMC322_06 | 制造商:HITTITE 制造商全称:Hittite Microwave Corporation 功能描述:GaAs MMIC SP8T NON-REFLECTIVE SWITCH, DC - 10.0 GHz |
| HMC322_09 | 制造商:HITTITE 制造商全称:Hittite Microwave Corporation 功能描述:GaAs MMIC SP8T NON-REFLECTIVE SWITCH, DC - 10 GHz |
| HMC322ALP4E | 功能描述:RF Switch IC SP8T 8GHz 50 Ohm 24-QFN (4x4) 制造商:analog devices inc. 系列:- 包装:剪带 零件状态:有效 频率?- 下:0Hz 频率?- 上:8GHz 隔离 @ 频率:40dB @ 6GHz（标准） 插损 @ 频率:2.5dB @ 8GHz IIP3:40dBm（标准） 拓扑:吸收性 电路:SP8T P1dB:26dBm 特性:- 阻抗:50 欧姆 工作温度:-40°C ~ 85°C 电压 - 电源:- RF 类型:- 封装/外壳:24-VFQFN 裸露焊盘 供应商器件封装:24-QFN（4x4） 标准包装:1 |
| HMC322ALP4ETR | 功能描述:IC SWITCH SP8T 8GHZ NEG 24-QFN 制造商:analog devices inc. 系列:* 包装:剪切带（CT） 零件状态:在售 封装/外壳:24-VFQFN 裸露焊盘 供应商器件封装:24-QFN（4x4） 标准包装:1 |
| HMC322LP4 | 制造商:HITTITE 制造商全称:Hittite Microwave Corporation 功能描述:GaAs MMIC SP8T NON-REFLECTIVE SWITCH, DC - 8.0 GHz |
发布紧急采购，3分钟左右您将得到回复。