- 您现在的位置：买卖IC网 > PDF目录65470 > HMC647 (HITTITE MICROWAVE CORP) 2500 MHz - 3100 MHz, 0 deg - 360 deg RF/MICROWAVE DIGITALLY CONTROLLED PH SHFTR PDF资料下载
参数资料
| 型号： | HMC647 |
| 厂商： | HITTITE MICROWAVE CORP |
| 元件分类： | 移相器 |
| 英文描述： | 2500 MHz - 3100 MHz, 0 deg - 360 deg RF/MICROWAVE DIGITALLY CONTROLLED PH SHFTR |
| 封装： | 3.85 X 1.90 MM, 0.10 MM HEIGHT, DIE-12 |
| 文件页数： | 6/6页 |
| 文件大小： | 181K |
| 代理商： | HMC647 |
P
H
A
S
E
S
H
IF
T
E
R
S
-
D
IG
IT
A
L
-
C
H
IP
3
3 - 37
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
GaAs MMIC 6-BIT DIGITAL
PHASE SHIFTER, 2.5 - 3.1 GHz
v01.0208
HMC647
Handling Precautions
Follow these precautions to avoid permanent damage.
Storage: All bare die are placed in either Waffle or Gel based ESD protective containers, and then sealed in an ESD protective bag
for shipment. Once the sealed ESD protective bag has been opened, all die should be stored in a dry nitrogen environment.
Cleanliness: Handle the chips in a clean environment. DO NOT attempt to clean the chip using liquid cleaning systems.
Static Sensitivity: Follow ESD precautions to protect against > ± 250V ESD strikes.
Transients: Suppress instrument and bias supply transients while bias is applied. Use shielded signal and bias cables to minimize
inductive pick-up.
General Handling: Handle the chip along the edges with a vacuum collet or with a sharp pair of bent tweezers. The surface of the
chip has fragile air bridges and should not be touched with vacuum collet, tweezers, or fingers.
Mounting
The chip is back-metallized and can be die mounted with electrically conductive epoxy. The mounting surface should be clean
and flat.
Epoxy Die Attach: Apply a minimum amount of epoxy to the mounting surface so that a thin epoxy fillet is observed around the
perimeter of the chip once it is placed into position. Cure epoxy per the manufacturer’s schedule.
Wire Bonding
Ball or wedge bond with 0.025mm (1 mil) diameter pure gold wire. Thermosonic wirebonding with a nominal stage temperature of
150 deg. C and a ball bonding force of 40 to 50 grams or wedge bonding force of 18 to 22 grams is recommended. Use the minimum
level of ultrasonic energy to achieve reliable wirebonds. Wirebonds should be started on the chip and terminated on the package or
substrate. All bonds should be as short as possible <0.31mm (12 mils).
Assembly Diagram
相关PDF资料 |
PDF描述 |
|---|---|
| HMC649LP6E | 3000 MHz - 6000 MHz, 360 deg RF/MICROWAVE DIGITALLY CONTROLLED PH SHFTR |
| HMC657LP2E | 0 MHz - 25000 MHz RF/MICROWAVE FIXED ATTENUATOR |
| HMC657LP2 | 0 MHz - 25000 MHz RF/MICROWAVE FIXED ATTENUATOR |
| HMC665LP4E | 700 MHz - 1200 MHz RF/MICROWAVE DOUBLE BALANCED MIXER |
| HMC665LP4 | 700 MHz - 1200 MHz RF/MICROWAVE DOUBLE BALANCED MIXER |
相关代理商/技术参数 |
参数描述 |
|---|---|
| HMC647ALP6E | 功能描述:RF IC Phase Shifter Radar 2.5GHz ~ 3.1GHz 28-QFN (6x6) 制造商:analog devices inc. 系列:- 包装:剪带 零件状态:有效 功能:相移 频率:2.5GHz ~ 3.1GHz RF 类型:雷达 辅助属性:- 封装/外壳:28-VQFN 裸露焊盘 供应商器件封装:28-QFN（6x6） 标准包装:1 |
| HMC647LP6 | 制造商:HITTITE 制造商全称:Hittite Microwave Corporation 功能描述:GaAs MMIC 6-BIT DIGITAL PHASE SHIFTER, 2.5 - 3.1 GHz |
| HMC647LP6_08 | 制造商:HITTITE 制造商全称:Hittite Microwave Corporation 功能描述:GaAs MMIC 6-BIT DIGITAL PHASE SHIFTER, 2.5 - 3.1 GHz |
| HMC647LP6E | 制造商:Hittite Microwave Corp 功能描述:IC PHASE SHIFTER 6-BIT 28-QFN |
| HMC647LP6ETR | 功能描述:RF IC Phase Shifter Radar 2.5GHz ~ 3.1GHz 6-Bit 28-QFN (6x6) 制造商:analog devices inc. 系列:- 包装:剪切带（CT） 零件状态:过期 功能:相移 频率:2.5GHz ~ 3.1GHz RF 类型:雷达 辅助属性:6 位 封装/外壳:28-VQFN 裸露焊盘 供应商器件封装:28-QFN（6x6） 标准包装:1 |
发布紧急采购，3分钟左右您将得到回复。